Part description

This used car part is intended for Peugeot 307 CC cars and serves as a holder for the driver’s seat belt lock. It is a part of the car’s interior and safety system, which is important for the correct attachment and function of the belt lock.

The part is often searched for by the original designation 8974Q8, which facilitates correct identification during repair or replacement. A suitable solution for car mechanics and for car owners who carry out repairs themselves and are looking for a specific part for Peugeot.

Technical information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Peugeot 307 CC
• Other numbers: 8974Q8, NFP

Product codes

• Product codes: 8974Q8
• Models: Peugeot 307

Installation recommendations

Generally/typically for this type of part, the exact replacement procedure may vary depending on the specific design of the car’s interior. With the seat belt lock holder, it is important to proceed carefully to maintain the correct function of the safety element after installation.

1) Before assembly

• Check that the new and original design of the part match in shape, fit and connector equipment, if included.
• Compare the product number on the original and replacement part.
• Inspect the used part for mechanical damage, cracks, deformation or excessive wear.
• Check the condition of the fastening points and surrounding parts of the interior.

2) Necessary tools and materials

• A common set of hand tools
• Tool for dismantling interior plastics
• Detergent for removing dirt
• Work gloves and lighting of the work area

3) Step-by-step assembly procedure

1. Secure the vehicle against movement and prepare sufficient access to the installation site.
2. Carefully remove any necessary interior covers or trim if they obstruct access to the part.
3. Disconnect or loosen the original seat belt lock holder according to the method of attachment in the car.
4. Carefully check the surroundings of the installation site and remove dirt or possible obstacles.
5. Compare the old and new part side by side, especially fit, shape and orientation.
6. Place the replacement bracket on the mounting location in the correct position.
7. Fix the part so that it fits without play or tension.
8. If other interior components were removed, reassemble them in reverse order.
9. Check that the belt buckle moves naturally and is not restricted by the cover or upholstery.
10. Perform a basic functional check of seat belt fastening and release.
• 4) Post-assembly checks and test drive/function verification
  • Verify that the part is firmly seated and does not show excessive play.
  • Check the correct operation of the seat belt lock by repeated on and off.
  • Make sure the belt is not crossed, jerky or unnaturally tight during use.
  • During a short test drive, observe whether there are any unwanted sounds or vibrations coming from the assembly area.

  5) The most common assembly mistakes + how to avoid them

  • Part replacement by appearance instead of number – always compare the product designation and mounting design.
  • Assembly under tension or in the wrong position – the part must be seated naturally, without twisting and tension.
  • Damage to interior plastics during removal – use a suitable pry bar for the trim and proceed with care.
  • Insufficient function check after installation – after installation, always try to turn on and release the belt several times.

  Reasons why the part is damaged

  • Long-term mechanical stress during daily use of the seat belt
  • Damage after careless disassembly or intervention in the interior
  • Deformation of attachment due to an accident or heavy load
  • Wear of material due to the age of the vehicle
  • Cracking or weakening of the structure due to repeated stress
  ]]>