Used replacement seat belt designed for the right rear (passenger side) of the Peugeot 307 CC. This part restores proper passenger restraint after damage or wear and is often searched under the product code 8974JY. Suitable for professional workshops and experienced DIY mechanics who need a direct-fit, vehicle-specific belt assembly without the buckle.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 307 CC (Right Rear – Passenger Side)
• Product Codes: 8974JY
• Additional Numbers: NFP

Fitment And Function

This seat belt assembly secures the right rear passenger in the Peugeot 307 CC. It consists of the webbing and retractor assembly provided without the buckle. The retractor locks the belt under sudden deceleration and retracts the webbing when not in use. Correct fitment ensures occupant protection and proper system operation in conjunction with vehicle seat belt anchor points and any vehicle-integrated pretensioner system.

Installation Recommendations

• Follow Manufacturer Procedures: Always follow Peugeot service instructions for removal and installation. Work should be carried out by a trained mechanic or a competent DIYer familiar with vehicle restraint systems.
• Safety First: If the vehicle is equipped with belt pretensioners or SRS components, disconnect the battery and wait the manufacturer-specified time before starting work to avoid accidental deployment.
• Remove Interior Trim Carefully: Access the retractor and anchor bolts by removing the trim panels without damaging clips or wiring.
• Replace Fasteners Correctly: Use original or equivalent grade bolts and tighten to the manufacturer-specified torque. Do Not Reuse Damaged Anchors.
• Check Webbing And Routing: Ensure the belt webbing runs without twists and that the retractor operates smoothly. Verify the belt locks under sudden pull.
• Post-Installation Check: Inspect anchor points, belt travel, and retractor function. If the vehicle has a pretensioner, confirm SRS warning lights behaviour after reconnection according to the workshop manual.

Reasons Why This Part Fails Most Often

• Wear And Abrasion: Repeated use causes webbing fraying or weakening, especially where it rubs on trim or seat edges.
• Retractor Malfunction: Dirt, corrosion, or internal spring/fork wear can prevent proper retraction or locking.
• Corrosion Of Anchors: Moisture ingress can corrode bolts and anchor points, compromising strength.
• Pretensioner Deployment: In an accident the pretensioner will activate and that seat belt assembly must be replaced.
• Contamination And Foreign Objects: Spills, grit, or objects trapped in the mechanism can impair operation.

Notes

Supplied Without Buckle. Often Searched By Product Code 8974JY. Ideal For Mechanics And Experienced DIY Repairers Looking For A Direct-Fit Replacement For The Peugeot 307 CC Right Rear Seat Belt. Order Now To Restore Safety And Compliance With Vehicle Restraint Functionality.

High-quality replacement right rear seat belt assembly designed for Peugeot 307 CC. This complete unit includes the buckle and mounting points, making it a direct-fit solution for mechanics and DIY enthusiasts searching by part number 8974JY. Ideal when the original belt is damaged, the buckle is faulty, or after an impact when the belt locking mechanism has been triggered. Clear product code reference in the description improves findability in online searches and helps you order the correct part quickly.

Key Benefits

• Complete Assembly: Supplied with Buckle For Straightforward Replacement.
• Direct Fit For Peugeot 307 CC: Simplifies Installation And Saves Time.
• Indexed By Part Number: Commonly Searched As 8974JY, Eases Identification.
• Suitable For Professional Garages And Skilled Self-Repairers.

How The Part Functions

The seat belt assembly secures rear-seat occupants by locking the webbing under sudden deceleration and by restraining movement in the event of a collision. The buckle provides a secure latch point for the tongue, while the retractor (integral to the assembly on many vehicles) controls webbing extension and automatic locking. If equipped, a pretensioner will activate during a severe impact to remove slack from the belt.

Replacement Guide

• Preparation: Park on level ground and isolate the vehicle electrical system where required — disconnect the battery before working near any pyrotechnic pretensioner components.
• Access: Remove interior trim panels and seats as needed to expose the belt anchorage points and the buckle mounting location.
• Removal: Unbolt the lower anchorage(s) and detach the buckle from its mounting. If the unit has an electrical connector (pretensioner), carefully unplug it following safety precautions.
• Installation: Fit the new assembly in reverse order, torque bolts to manufacturer specifications and ensure the belt rewinds and locks smoothly. Reinstall trim pieces and perform a functional check of latch engagement and retraction.
• Notes: If The Vehicle Is Equipped With A Pretensioner, Follow Manufacturer Safety Procedures During Removal And Installation.

Installation Recommendations

• Always Use Correct Torque Values For Mounting Bolts To Maintain Structural Integrity.
• Inspect Mounting Points For Corrosion Or Damage And Repair If Necessary Before Fitting The New Belt.
• Verify Smooth Retraction And Proper Latching After Installation.
• If The Belt Has An Electrical Connector Or Pretensioner, Disconnect The Battery And Wait The Manufacturer-Specified Time Before Handling.

Why The Part Most Commonly Fails

• Wear And Tear: Webbing Can Fray, Stiffen Or Become Contaminated Over Time Reducing Performance.
• Buckle Faults: Internal Latch Mechanisms Can Jam Due To Dirt, Corrosion Or Mechanical Damage.
• Pretensioner Activation: After A Collision The Pretensioner May Deploy And The Entire Assembly Requires Replacement.
• Mounting Corrosion Or Damage: Structural Fixings Can Weaken, Compromising Safety.

Technical Information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Peugeot 307 CC
• Product Codes: 8974JY NFP
• Additional Numbers: 8974JY

Ordering this right rear seat belt by part number (8974JY) ensures you receive the correct assembly for the passenger-side rear position of Peugeot 307 CC models. Suitable for professional fitment and experienced DIY repairs; follow all safety and manufacturer procedures when working with restraint systems.