This is a right-hand pyrotechnic passenger seat belt designed for Peugeot 206 and 206+. Ideal for professional auto shops and experienced DIY mechanics who replace crash‑activated restraints or worn assemblies. The unit includes a pyrotechnic pretensioner designed to lock and tighten the belt instantly during a severe impact to reduce occupant movement.

Function and Application

The seat belt assembly secures the front passenger during normal driving and, in the event of a collision, works together with the pretensioner and airbags to reduce forward movement. On impact the pyrotechnic pretensioner activates to remove slack from the webbing, improving occupant protection. This part is intended for the right front (passenger side) of Peugeot 206 and 206+ models. Color code: FXX (Black).

How To Replace

Replacement should be performed by a qualified technician or a competent DIY mechanic with basic workshop tools. Typical replacement steps:

• Disconnect the vehicle battery and wait a few minutes to ensure the system is discharged.
• Remove trim pieces and seats as required to access the belt retractor and anchor points.
• Disconnect any electrical connectors related to the pretensioner (if fitted) before unbolting.
• Unbolt the lower anchor and the retractor unit, remove the old belt assembly.
• Install the new unit, securing bolts to the manufacturer’s torque specifications and reconnect electrical connectors.
• Refit trim and seats, reconnect the battery and verify proper belt retraction and locking by performing static checks.

Installation Recommendations

Always follow vehicle manufacturer procedures. Disconnect the battery before starting work and allow time for the airbag/pretensioner system to discharge. Use the correct torque values for mounting bolts and replace any corroded fasteners. If the pretensioner electrical connector shows damage or corrosion, address it before completing installation. After replacement, check belt webbing for smooth travel, proper locking under a sharp pull, and correct anchorage alignment.

Most Common Reasons For Failure

• Deployment During A Crash: Pyrotechnic pretensioners are single‑use and must be replaced after any deployment.
• Webbing Wear Or Fraying: Prolonged abrasion, contamination or UV exposure can weaken the belt webbing.
• Retractor Locking Or Jamming: Dirt, corrosion or internal spring/failure can prevent proper retraction.
• Electrical Or Connector Issues: Corrosion or damage to the pretensioner connector can prevent correct function.
• Impact Or Mechanical Damage: Seat belt components can be bent or damaged in collisions or from improper removal/installation.

Technical Information

• Manufacturer: Stellantis (Peugeot)
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96468606XX, 8973WJ, 8973WL, 8974GV, 8974GS
• Other Numbers: 8973WJ | 8973WL | 8974GS | 8974GV | 96468606XX

Notes For Mechanics

This is a safety-critical component. Replace any belt assembly that shows signs of deployment, damage or excessive wear. After fitting, verify that the belt retracts smoothly, locks under sudden pull and that the pretensioner electrical interface is intact. Keep documentation of replacement for vehicle service records.

Product Overview

Right front pyrotechnic seatbelt (seat belt with pretensioner) designed for Peugeot 206 and 206+ models. Built to restore original safety functionality after deployment or mechanical failure, this unit includes the retractor and pretensioner assembly mounted on the B‑pillar and the lower anchorage components. Finished in Black (FXX) to match standard interior trims on listed models.

Key Benefits

• Direct fit for Peugeot 206 / 206+ — commonly located and referenced by product codes for fast search and ordering.
• Restores occupant restraint and pretensioner functionality after deployment or malfunction.
• Durable webbing and robust retractor mechanism designed for long service life under normal conditions.

Compatibility

Suitable for Right Front (Passenger Side) of Peugeot 206 and Peugeot 206+. Verify fit by matching product codes listed below with vehicle spare parts documentation.

How It Works

The seatbelt assembly combines a retractable belt with a pyrotechnic pretensioner. In the event of a crash, the pretensioner rapidly removes slack from the webbing to better position the occupant before airbag deployment. The retractor ensures controlled locking and release during normal use and locking under sudden deceleration.

Replacement Procedure (Overview)

• Disconnect Battery: Always disconnect the vehicle battery and wait the manufacturer‑recommended time to ensure pyrotechnic and airbag circuits are discharged.
• Remove Interior Trim: Carefully remove the B‑pillar trim and any necessary panels to access the upper and lower belt anchor points.
• Unbolt Assembly: Unscrew the belt lower anchorage and the retractor mounting bolts. If present, disconnect the electrical connector for the pretensioner.
• Install New Unit: Fit the replacement assembly, route the webbing correctly, and tighten all fasteners to the Manufacturer’s torque specifications.
• Diagnostics: After installation, perform a system check with appropriate diagnostic equipment to clear fault codes and verify pretensioner circuit integrity.

Installation Recommendation

Installation of pyrotechnic seatbelts should be performed by a qualified technician. Take special care when handling the pretensioner: always disconnect the battery before work and follow the vehicle manufacturer’s procedures. Use correct torque values for anchor bolts and professional diagnostic tools to confirm system readiness. If unsure, refer to official service manuals for step‑by‑step guidance.

Most Common Failure Causes

• Deployment in a Collision: The pretensioner and often the retractor must be replaced after any deployment event.
• Electrical Faults: Corroded or damaged wiring/connectors can prevent pretensioner activation or generate airbag/seatbelt faults.
• Mechanical Wear: Webbing abrasion, fraying, or retractor jamming from debris can reduce effectiveness.
• Corrosion: Moisture ingress and rust at anchor points or internal components can impair operation.

Technical Information

• Manufacturer: Stellantis
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96361048XX, 8973SG, 8973WL, 8973WJ, 8974GV
• Other Numbers: 8973.SG, 8973.WJ, 8973.WL, 8973SG, 8973WJ, 8973WL, 8974GV, 96361048XX

Notes For Mechanics And DIYers

This part is intended for right front passenger position. When replacing a pyrotechnic seatbelt, always observe safety precautions for restraint systems. After installation, clear and verify airbag/seatbelt system status with an appropriate diagnostic tool. Do not reuse pretensioner‑activated assemblies; replace with a complete, serviceable unit.

High-quality Right Front Pyrotechnic Seat Belt designed for Peugeot 206 and 206+ vehicles. This OE-fit replacement includes a pyrotechnic pretensioner for rapid belt tensioning in the event of a collision and a locking retractor that secures the occupant. Ideal for professional workshops and experienced DIYers who search by part number: 96468608XX, 8973WL, 8973WJ, 8974GV, 8974GS. Constructed to match original mounting points and connectors for straightforward swap-in installation and reliable safety performance.

Key Features

• Position: Right Front (Passenger) Seat Belt with Pyrotechnic Pretensioner.
• Color: FXX – Black, matching Peugeot 206 interior trims.
• Direct Replacement: Designed to fit original fastening points and connector types used on Peugeot 206 / 206+ models.
• Often Searched By Part Number: 96468608XX, 8973WL, 8973WJ, 8974GV, 8974GS.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96468608XX, 8973WL, 8973WJ, 8974GV, 8974GS
• Additional Numbers: 8973WJ | 8973WL | 8974GS | 8974GV | 96468608XX
• Position: Right Front (Passenger)
• Color: FXX – Black
• Type: Pyrotechnic Pretensioner Seat Belt with Locking Retractor

Fitment And Replacement Overview

This seat belt is intended as a direct-fit replacement for the right front passenger side of Peugeot 206 and 206+ models that use the listed part numbers. It is suitable for professional repair shops and competent DIY mechanics familiar with vehicle safety systems.

Typical replacement procedure:

• Ensure Vehicle Is Safe: Before beginning, disconnect the vehicle battery to avoid accidental activation of pyrotechnic components and follow the vehicle manufacturer’s recommended safety waiting period.
• Remove Trim Panels: Carefully remove the interior trim to access the belt retractor, anchor points and buckle.
• Unbolt And Disconnect: Unbolt the retractor and lower anchor bolts, unplug the electrical connector for the pretensioner (if present) and remove the old belt assembly.
• Install New Unit: Position the new seat belt assembly, reconnect the electrical connector, fit anchors and hand-start bolts, then torque all fasteners to the manufacturer’s specified values.
• Refit Trim And Test: Refit trim panels, reconnect the battery, and verify that the belt retracts and locks correctly. If any fault indicators appear related to the restraint system, perform a diagnostic scan with appropriate PSA-compatible equipment.

Installation Recommendations

• Always Disconnect The Battery: Disconnect the negative battery terminal before working on pretensioners or any pyrotechnic restraint components and observe the manufacturer’s recommended wait time to discharge capacitors.
• Observe Correct Torque And Fastening Order: Use the vehicle manufacturer’s torque settings for seat belt bolts—do not reuse damaged bolts or anchorage hardware.
• Do Not Attempt To Service The Pretensioner: The pyrotechnic pretensioner is a single-use safety device; do not attempt to disassemble or repair it. If the pretensioner has been activated in a collision, replace the entire assembly.
• Use Diagnostic Tools If Required: After installation, clear any restraint system fault codes with suitable diagnostic equipment and confirm proper system status.
• Recommended For Professionals: Because this is a safety-critical component, installation by a qualified technician is recommended when in doubt.

Why This Part Fails

Common causes of seat belt failure include normal wear and tear (frayed or weakened webbing), contamination with dirt or chemicals, corrosion of anchor points, retractor mechanism jamming, or activation of the pyrotechnic pretensioner during a collision. Electrical faults or connector corrosion can also render the pretensioner inoperative. After a deployment event, the pretensioner and related components must be replaced.

Notes For Buyers

Searches for this part are frequently performed using the product codes listed above—include these numbers in your search to find compatible units quickly. Fitment is intended for Peugeot 206 and 206+ models; verify visual match with the original unit before installation.

Safety Reminder

Seat belts and pretensioners are critical safety devices. Improper installation can compromise occupant protection. If you are not fully confident in performing the replacement, have the work performed or checked by a qualified auto technician.