This direct-fit seat heating switch is designed for Stellantis vehicles under the Citroën and Peugeot brands and is commonly searched by part numbers 96619006XT, 8906HR, 8906EF and 892555. Suitable for professional workshops and DIY mechanics, the unit restores user control over seat cushion heating levels and improves cabin comfort on cold days.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C5 X7; Peugeot 207; Peugeot 308 T7; Peugeot 3008 I; Peugeot 5008 I; and Other Models
• Product Codes: 96619006XT; 8906HR; 8906EF
• Other Numbers: 892555

Function And Benefits

The switch controls power delivery to the seat heating element, allowing the occupant to switch the heater On/Off and select available heating levels (dependant on vehicle specification). A working controller ensures reliable, adjustable seat warming, improved comfort, and proper interaction with the vehicle’s HVAC and safety systems.

Installation Recommendations

• Disconnect Battery Negative Before Work To Avoid Short Circuits.
• Use Trim Removal Tools To Remove Surrounding Trim Without Damage.
• Access The Switch By Releasing Clips Or Removing Fasteners (Screw Or Torx Depending On Model).
• Unplug Electrical Connector And Remove The Old Switch; Inspect Connector Pins For Corrosion Or Damage.
• Fit The New Switch, Reconnect The Connector And Test Functionality Before Reassembling Trim.
• Typical Replacement Time: Approximately 15–40 Minutes For A Single Seat, Depending On Model And Trim Complexity.
• Recommended Tools: Trim Pry Tools, Screwdriver Or Torx Set, Multimeter For Quick Voltage/Continuity Checks.

Common Failure Reasons

• Wear And Contact Degradation: Mechanical switches and internal contacts deteriorate after many cycles, causing intermittent or loss of function.
• Moisture And Contamination: Spills or moisture ingress Can Corrode Contacts Or Short Internal Electronics.
• Connector Or Wiring Issues: Corroded Pins, Broken Wires Or Poor Connections In The Harness Lead To Faults.
• Thermal And Electrical Stress: Overcurrent Conditions From A Faulty Seat Heating Element May Damage The Switch Electronics Or Contacts.
• Mechanical Damage: Excessive Force Or Impact During Use Or Removal Can Break Switch Components.

Symptoms Of A Failing Unit Include No Heating, Intermittent Operation, Stuck Settings Or Unlit Indicators. Before Replacement, Inspect Fuses And Wiring For Visible Damage; the switch is often the part that gets replaced when control or user interface fails.

Part numbers Are Frequently Used As Search Terms By Professionals And DIY Enthusiasts—entering 96619006XT, 8906HR, 8906EF Or 892555 Will Quickly Identify This Component. Order this direct-fit replacement to restore reliable seat heating control and passenger comfort.

This Seat Heating Controller is a direct-fit control unit designed for heated seat cushions on selected Citroën and Peugeot vehicles. Ideal For Professional Technicians And DIY Enthusiasts, The Switch Allows Reliable Adjustment Of Seat Cushion Temperature And Replaces Faulty Or Worn Original Units. The Part Is Commonly Searched By Its Product Numbers, Making It Easy To Find For Fast Repair Or Service Jobs.

The Controller Regulates Power To The Seat Heating Element, Providing Several Heat Levels (Depending On Vehicle Configuration) And Restoring Comfortable Seat Warming Functionality. It Is Suited For Use In Workshop Replacements During Interior Repairs Or When Diagnosing Cold Seat Complaints. Installing A Correctly Matched Controller Eliminates Faulty Switch Behavior, Intermittent Heating, Or Complete Loss Of Seat Warmth.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C5 X7, Citroën C8, Peugeot 207, Peugeot 308 T7, Peugeot 807 (And Other Compatible Models)
• Product Codes: 96618990XT, 96500377XT
• Other Numbers: 8906HR, 8906EF, NFP

How To Replace

Replacement Is Straightforward For A Mechanic Or Experienced DIYer: Disconnect The Vehicle Battery First. Remove The Seat Trim Or Console Panel To Access The Switch Assembly. Unclip Or Unscrew The Switch From Its Mounting, Carefully Disconnect The Electrical Connector, And Swap In The New Controller. Reconnect The Connector, Refit Trim, Reconnect The Battery, And Verify Function Across All Heat Settings.

Installation Recommendations

Work With The Battery Disconnected To Prevent Short Circuits. Use Trim Tools To Avoid Damage To Interior Panels. Check The Wiring Harness And Connector Pins For Corrosion Or Loose Contacts Before Installing The New Unit. If Connector Damage Or Wiring Faults Are Present, Repair Those Issues To Ensure Long-Term Operation. After Installation, Test Each Heating Level And Confirm That Any Seat Temperature Safety Cutouts Reset Correctly.

Why This Part Commonly Fails

The Most Frequent Causes Of Failure Include Contact Wear Inside The Switch From Repeated Use, Moisture Ingress Causing Corrosion Or Short Circuits, Broken Or Fatigued Wiring And Connector Pins, And Thermal Stress From Overheating. Intermittent Operation Often Points To Worn Internal Contacts Or Poor Connector Mating, While Total Failure May Be Due To Internal Electrical Faults Or Damage Sustained During Seat Servicing.

Ordering By The Product Code (96618990XT / 96500377XT / 8906HR / 8906EF) Improves The Chance Of Immediate Compatibility With The Listed Models And Speeds Up Workshop Turnaround.