Part description

This passenger armrest is intended for the Citroën C4 Picasso and represents a practical interior part for restoring the comfort and original appearance of the seat. It is a used car part, which is searched mainly by the designation 8830PZ, or also by the related number 8830PH.

The backrest is made of the fabric Misteco 2 single color – F930 and the color design HZD – black Mistral. It is especially suitable for replacing a damaged, worn or loose original backrest on the passenger seat. Thanks to the original design, it fits naturally into the interior of the car without disturbing differences in material and appearance.

• Original used part for Citroën/Peugeot cars
• Right armrest for passenger seat
• Suitable for repairing the interior without unnecessary modifications
• Searched by code 8830PZ

Technical information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Citroën C4 Picasso
• Other numbers: 8830PH

Product codes

• Product codes: 8830PZ, 8830PH
• Models from labels and documents: Citroën C4 PICASSO

Installation recommendations

It generally applies to replacing the seat armrest that the exact procedure may vary depending on the specific design of the seat and the method of attachment. Before the assembly itself, it is advisable to carefully compare the new used part with the original piece.

1) Before assembly

• Check whether the backrest shape, attachment, right/left orientation and overall design match.
• Compare the coating, color and construction details with the old part.
• Inspect the used part for excessive clearance, cracks, damaged joint or fatigued attachment.
• Verify that the mounting points are not deformed and that there is no missing part needed for fixing.

2) Necessary tools and materials

• A common set of hand tools
• Screwdrivers or bits according to the type of connecting material
• Plastic pry bar for gentle release of covers
• Cleaning agent for removing dirt from around the attachment
• A cloth or a soft brush

3) Step-by-step assembly procedure

1. Park the vehicle on level ground and make sure there is enough room to work in the passenger seat.
2. Adjust the seat in such a position that you have the best possible access to the attachment point of the backrest.
3. If there are attached caps or plastic plugs nearby, carefully remove them without damaging them.
4. Dismantle the original armrest or its fasteners according to the method of attachment to the vehicle.
5. Clean the mating surfaces and check that there are no dirt or damaged parts of the old part left at the assembly point.
6. Compare the old and new part side by side and verify the matching of mounting points and orientation.
7. Place the used armrest in the correct position and make sure it fits exactly without crossing or applying forceful pressure.
8. Attach the backrest with the original fasteners or appropriate mounting hardware if included in the original assembly.
9. Proceed sensitively when tightening to avoid damage to plastic or textile parts in the vicinity.
10. After fixing, test the movement of the backrest several times to check that it holds firmly and works smoothly.
• 4) Post-assembly checks and function verification
  • Check the stability of the armrest under normal hand load.
  • Check that the backrest does not loosen, is not wobbly, and is properly seated against the seat.
  • Test the comfort while sitting and make sure that the backrest does not restrict the normal use of the seat.
  • After a short period of use, check again whether the fastening has loosened.

  5) The most common assembly mistakes + how to avoid them

  • Swapping the right and left side – always compare the orientation of the part with the old part before assembly.
  • Assembly without fit check – check the condition of the mounting points and joint before fitting.
  • Damage to the plastic covers – release the covers with a plastic tool and without excessive force.
  • Insufficient seating – before tightening, check that the backrest is seated straight and without tension.
  • Overview of the wear of the used part – test the stiffness and function of the joint mechanism before assembly.

  Reasons why the part is damaged

  • normal wear and tear from everyday use
  • excessive loading of the backrest by body weight or by leaning when boarding
  • looseness or wear of the joint or fastening
  • mechanical damage due to careless handling in the interior
  • pollution and gradual wear of the cover and surface
  ]]>