This right-hand exterior mirror is a direct-fit replacement designed for Citroën C1 and Peugeot 107 models. Built to match the original geometry and mounting points, it restores proper rearward visibility and vehicle aesthetics after damage or wear. The unit is finished in KWD Lipizan White paint for an OEM-matched appearance and is suitable for professional workshops and experienced DIY enthusiasts who perform exterior body and trim repairs.

Function And Fitment

The mirror assembly provides adjustable reflective surface and, depending on original specification, may include electric adjustment and integrated heating. It mounts to the passenger-side door using the factory bracket and connector locations for a secure, vibration-free fit. Replacement is ideal after impact damage, cracked glass, failed adjustment motors, or severely scuffed housings.

How To Replace

• Prepare: Park on a level surface and engage the parking brake. For safety when working near electrical connectors, switch ignition off.
• Remove Interior Trim: Pry off the small triangular trim panel on the inside of the door to expose the mirror mounting bolts and electrical connector.
• Disconnect Connector: Carefully unplug the mirror electrical connector (if present) and release any clips.
• Remove Fasteners: Unscrew the mirror mounting bolts and support the mirror to prevent it falling free.
• Install New Mirror: Position the new mirror, hand-thread the bolts, then tighten to secure. Reconnect the electrical connector and test all functions (adjustment, folding, heating if fitted).
• Reassemble: Replace the interior trim panel and verify there are no rattles or alignment issues. Adjust mirror position from inside the vehicle.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C1; Peugeot 107 (Passenger Side)
• Product Codes: 87910-0H010, 87910-0H011
• Additional Numbers: 8153YS, 815289, 8151HW, KWD

Installation Recommendations

Use suitable trim tools to avoid damaging interior panels. Ensure connector pins are clean and undamaged before assembly. Tighten mounting bolts evenly and avoid overtightening plastic components. After installation, test mirror adjustment, heating, and folding functions (if equipped) to confirm correct operation. If the original mirror included electrical features, verify connector compatibility before final reassembly.

Why This Part Fails

Exterior mirrors most commonly fail due to: impact collisions (parking knocks, side swipes), water ingress causing motor or heater failure, mechanical wear of adjustment gears, or cracked/broken glass from road debris. Cosmetic deterioration from sun and weather can also necessitate replacement despite full functionality.

For mechanics and competent DIYers, this replacement offers a reliable way to restore safety and appearance quickly, using standard hand tools and basic electrical checks. Keywords for search: Citroën C1 Right Mirror, Peugeot 107 Passenger Mirror, 87910-0H010, 87910-0H011, Lipizan White Mirror.

This OEM-compatible right side mirror is designed for Citroën C1 and Peugeot 107 models and features a factory-matched painted cover in Gallium Grey (KTB). Ideal for professional workshops and DIY mechanics, the mirror restores original appearance and functionality after damage or wear. Commonly searched by part numbers 87910-0H010, 8149XY and 8153YS, this unit helps you find the correct replacement quickly.

Application And Benefits

Fits Citroën C1 and Peugeot 107 passenger side (right). The painted cap ensures color match with factory finish, improving the car’s visual integrity after repairs. The mirror assembly is supplied ready for installation and is suitable for vehicles that originally came with a painted exterior mirror on the passenger side.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1, Peugeot 107
• Product Codes: 87910-0H010, 8149XY, 8153YS
• Additional Numbers: KTB (Paint Code – Gallium Grey)

Installation Recommendations

Remove the interior triangular trim on the passenger door to access the mirror mounting nuts. Support the mirror from the outside while removing the retaining fasteners to prevent it from falling. Disconnect the electrical connector if present, then remove the old unit and fit the new mirror in reverse order. Make sure the connector is fully seated and that the mirror is aligned before tightening. Tighten fasteners to the manufacturer’s recommended specification and verify all mirror functions (adjustment, folding, heating if equipped) before finishing. Use protective covers to avoid scratching door trim and work with the window up to prevent damage.

Most Common Failure Reasons

Exterior mirrors on compact city cars like the C1 and 107 most often fail due to impact damage from bumps or collisions, broken glass, or mechanical wear in the folding and adjustment mechanisms. Electrical faults can arise from water ingress into the motor or connector corrosion. Regular minor knocks, urban parking incidents, and exposure to road salt are the typical causes that necessitate replacement.

Practical Notes For Mechanics And DIYers

Keep the original fastening hardware and foam seals if they remain undamaged, or replace them to ensure correct fit and to prevent wind noise. When replacing a painted mirror, check the paint code (KTB) before ordering to ensure a perfect color match. Use the listed product codes (87910-0H010, 8149XY, 8153YS) to confirm fitment with vehicle repair records or parts catalogs.

Why Choose This Mirror

This mirror offers a precise fit for Citroën C1 and Peugeot 107 passenger side applications with a factory-style painted finish in Gallium Grey (KTB). Clear part numbering and OEM-level compatibility make it straightforward for technicians and home mechanics to locate and install the correct replacement quickly, restoring both appearance and function.

Product Overview

Replacement right (passenger side) exterior mirror for Citroën C1 and Peugeot 107. Supplied in red with visible fading on the painted cover as shown in the photos. Suitable for mechanics and DIY enthusiasts who need a direct-fit replacement part referenced by OE product numbers.

Key Benefits

• Direct fit for Citroën C1 and Peugeot 107 — simplifies installation and reduces workshop time.
• Includes painted mirror housing (note: paint is faded as pictured).
• Part numbers printed in the listing to help fast identification and search by code.

Compatibility / Models

Fits Passenger Side (Right) of the following models:

• Citroën C1
• Peugeot 107

How It Works And Typical Faults

The exterior mirror provides the driver with a lateral rear view and, depending on vehicle specification, may include an electric adjustment motor and/or heated glass. Common causes of mirror failure or replacement include mechanical damage from impacts, cracked or broken glass, motor failure due to wear or water ingress, and cosmetic deterioration such as paint fading from UV exposure. The painted cover on this unit shows signs of fading, which is cosmetic but can affect appearance.

Replacement Procedure (General Guidance)

• Park Vehicle On Level Surface And Ensure Ignition Is Off.
• If Mirror Is Electrically Operated, Disconnect Battery Before Work To Avoid Short Circuits.
• Remove Interior Door Trim/Triangular Trim Piece To Access Mirror Mounting Nuts.
• Support Mirror From Outside, Unscrew Mounting Nuts, And Carefully Pull Mirror Away From Door.
• Disconnect Wiring Harness (If Present) And Remove Old Unit.
• Fit New Mirror, Connect Harness, Tighten Mounting Nuts To Manufacturer Torque Spec, And Refit Interior Trim.
• Test All Mirror Functions (Adjustment, Heating If Applicable) Before Completing Reassembly.

Installation Recommendations

• Follow Manufacturer Procedures And Torque Specifications When Tightening Mounting Nuts.
• If The Unit Is Electrically Operated, Reconnect The Battery Only After Wiring Is Secure To Prevent Electrical Damage.
• Check Door Seal And Connector For Signs Of Water Ingress; Apply Dielectric Grease To Connectors If Needed.
• Replace Fasteners If They Show Corrosion Or Damage To Ensure A Secure Fit.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1; Peugeot 107
• Product Codes: 87910-0H010; 87910-0H011
• Additional Numbers: 8153YS

Why This Part Fails Most Often

Exterior mirrors commonly fail due to external impacts (parking knocks, road debris), long-term exposure to sunlight causing paint fading and plastic embrittlement, and ingress of water leading to motor or connector corrosion. Mechanical wear of the adjustment mechanism over many cycles can also cause loss of function.

Final Notes

Check the photos for the exact cosmetic condition before purchase. Using the OE product codes (87910-0H010, 87910-0H011, 8153YS) in searches will help you confirm fitment and speed up parts identification. Order now to restore safe visibility and vehicle appearance.

Description

High-quality replacement right (passenger-side) exterior mirror designed as a direct-fit part for Citroën C1, Peugeot 107 and Toyota Aygo. This unit is supplied in black, unpainted finish — ideal for repair shops and DIY mechanics who need a reliable body-side mirror to restore appearance and function after impact or wear. The mirror corresponds to OEM mounting points and part numbers used across Stellantis/PSA platforms, ensuring straightforward installation and consistent alignment.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1; Peugeot 107; Toyota Aygo
• Product Codes: 87910-0H010, 87910-0H011
• Additional Numbers: 8153YS, 815289, 8151HW

Fitment And Replacement Procedure

This mirror is a passenger-side replacement designed to mount to the original door bracket and fixings. Typical replacement steps for a trained technician or competent DIYer:

• Remove the interior door trim or triangular mirror cover to access mounting screws/bolts.
• If present, carefully disconnect any electrical connector(s) for mirror adjustment, heating or indicators.
• Unscrew the retaining bolts and remove the damaged mirror assembly from the door.
• Transfer any required components from old unit to new (e.g., mirror glass, actuator, indicator module) if they are not supplied with the replacement.
• Fit the new mirror, secure bolts to the manufacturer’s torque specification, reconnect wiring and test all functions (adjustment, heating, indicators) before refitting interior trim.

Installation Recommendations

• Verify the part numbers printed above match the vehicle’s original mirror before installation.
• Handle electrical connectors and plastic trim gently to avoid breakage; test mirror functions prior to final reassembly.
• If the unit is to be painted, use proper priming and paint processes for durable finish — this product is supplied unpainted.
• Use correct torque settings for mounting bolts and avoid overtightening to prevent housing distortion.

Why This Part Most Often Fails

Exterior mirrors typically fail due to impact damage (collisions, parking knocks or vandalism), which cracks the housing or breaks mounting points. Other common causes include internal actuator or motor failure from wear, water ingress or wiring corrosion that leads to loss of power adjustment or heating function, and damage to folding mechanisms. In normal use without impact, mirrors do not have a defined service interval — replacement is driven by functional failure or cosmetic damage.

Notes For Mechanics And DIYers

This mirror is intended for professionals and experienced DIY mechanics familiar with door trim removal and electrical connector handling. Check and, if necessary, transfer any sensors or indicator modules from the original assembly. Always confirm that the replacement restores full mechanical alignment and electrical operation before completing the job.

Engineered for easy installation, this mirror fits on the passenger side and is an ideal replacement for damaged or broken mirrors. Regular wear and tear can lead to mirror degradation, often due to exposure to various weather conditions or minor collisions.

This product is compatible with the following OEM codes: 87910-0H010 and 87910-0H011, which ensures quality and perfect fit. Automotive enthusiasts and mechanics can rely on its durability and performance, providing a seamless match for your Citroën C1 or Peugeot 107.

Technical Information

• Manufacturer: PSA
• Model: Citroën C1, Peugeot 107
• Product Codes: 87910-0H010, 87910-0H011
• Other Numbers: 8153YS, 815289, 8151HW

It is important to replace mirrors promptly since a damaged mirror can lead to reduced visibility and increased risk of accidents. Typically, mirrors should be checked during routine vehicle maintenance or at the first sign of damage. This mirror is specifically compatible with Citroën C1 and Peugeot 107 models, ensuring a perfect fit and functionality.

Technical Information

• Manufacturer: PSA
• Model: Citroën C1, Peugeot 107
• Product Codes: 87910-0H010, 87910-0H011
• Other Numbers: 8153YS, 815289, 8151HW

Installation of the mirror is straightforward and can be done with basic tools. Carefully remove the old mirror, disconnect it from the wiring harness, and replace it with the new one, securing it in place. This allows for a hassle-free DIY replacement for both professional mechanics and car enthusiasts.

When replacing the mirror, it’s important to ensure that all electrical connections are properly reattached. Mirrors may need replacement due to wear and tear from everyday use, or accidental damage. Regular inspections can prevent the need for unexpected replacements.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C1, Peugeot 107
• Product Codes: 87910-0H010, 87910-0H011
• Additional Numbers: 8153YS, 815289, 8151HW

Replacing your right mirror is a straightforward process, making it suitable for both professional mechanics and DIY enthusiasts. Regular wear and tear can affect mirrors, making it essential to replace them when damaged or broken. Common reasons for failure include accidents, environmental exposure, and deterioration over time. By replacing your mirror, you improve safety and maintain the sleek look of your vehicle.

Technical Information

• Manufacturer: PSA
• Model: Citroën C1, Peugeot 107
• Product Codes: 87910-0H010, 87910-0H011
• Other Numbers: 8153YS, 815289, 8151HW

Replacement of the side mirror is crucial, particularly when the original has been damaged due to minor collisions or wear over time. Regular use can result in scratches or shocks that can undermine visibility, making timely replacement important for maintaining safety standards.
The installation process for this mirror is straightforward and requires basic tools, making it ideal for both professional mechanics and DIY car enthusiasts. It’s recommended to consult your vehicle’s manual for precise instructions.

Technical Information

• Manufacturer: PSA
• Model: Citroën C1, Peugeot 107
• Product Codes: 87910-0H010, 87910-0H011
• Other Numbers: 8153YS, 815289, 8151HW

Upgrade your vehicle today with the Right Mirror Black Metallic for Citroën C1 and Peugeot 107, and enjoy an improved driving experience with enhanced safety and style.

Product Overview

High-quality right side exterior mirror designed as a direct-fit replacement for Citroën C1 and Peugeot 107 models. Supplied in KWD Lipizzan White paint finish to match factory-colored doors. This unit is an ideal choice for professional workshops and DIY mechanics who search by part number (87910-0H010 / 87910-0H011) and need a reliable, visually matching replacement.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1; Peugeot 107
• Product Codes: 87910-0H010, 87910-0H011
• Other Numbers: 8153YS, 815289, 8151HW, KWD

Function And Characteristics

The mirror provides the standard exterior-viewing function for the passenger side and is finished in factory-matched Lipizzan White. Depending on the vehicle equipment level, the mirror may be supplied for manual or powered adjustment and can accommodate heated glass or integrated indicators where applicable. As a bodywork component, its primary role is to restore visibility, vehicle appearance and safe operation after damage or wear.

Replacement Procedure

Removal and installation are straightforward for experienced technicians or competent DIYers. General steps:

• Carefully remove the interior door trim or triangular cover to access mirror fasteners.
• Disconnect the mirror electrical connector if present (adjustment, heating, indicators).
• Unscrew the retaining bolts and remove the old mirror from the door.
• Fit the new mirror, secure the fasteners to the manufacturer’s specified torque, reconnect any wiring and refit the trim.
• Check all functions (adjustment, heating, folding, indicators) and correct alignment of the mirror glass.

Installation Recommendations

• Work In A Dry, Clean Environment To Avoid Dirt Entering Door Cavity.
• Use Trim Tools To Prevent Damage To Interior Panels When Removing Covers.
• Test Electrical Functions Before Reassembling The Door Panel.
• If The Vehicle Has Electric Functions, Ensure Connectors Are Fully Seated And Secure.
• Follow Manufacturer Fastening Torque Values Where Available.

Most Common Reasons For Failure

• Impact Damage From Parking Accidents Or Road Debris Leading To Broken Housing Or Glass.
• Wear Or Failure Of The Folding Mechanism Due To Repeated Mechanical Stress.
• Water Ingress Causing Corrosion Or Motor/Electrical Malfunctions.
• Paint Damage From Scratches Or Chips Affecting Appearance.

Why Choose This Part

Supplied in a factory-matched paint finish and listed under common OEM product codes, this mirror reduces fitting time and blending work. It’s suitable for technicians and home mechanics who prioritize a precise fit and original appearance. Searching by the displayed part numbers (87910-0H010 / 87910-0H011) will help you quickly find the correct unit for Citroën C1 and Peugeot 107 applications.