Product Overview

This passenger airbag switch is a direct-fit component used in select Citroën and Peugeot models. It allows the passenger airbag to be manually enabled or disabled when required (for example when a rear-facing child seat is installed). Commonly searched by part numbers 96373215XT, 95835T02 or 8216E6, this switch is designed for professional workshops and experienced DIY enthusiasts who carry out interior and safety system repairs.

Function And Benefits

• Controls the activation state of the front passenger airbag (ON/OFF) via a keyed or rocker switch integrated into the dashboard or glovebox area.
• Essential when transporting infants in rear-facing child seats on the front passenger position where permitted by local regulations.
• OEM-style fit improves reliability and maintains correct connector interfaces with the vehicle wiring loom.
• Search-optimized: frequently looked up by part numbers 96373215XT, 95835T02 and 8216E6.

Fitment and Compatibility

Compatible with the following models (as indicated by original listings):

• Citroën C1
• Citroën C2
• Citroën C3
• Citroën C3 Pluriel
• Peugeot 607

Installation — General Guide

Replacement is straightforward for trained technicians and competent DIYers familiar with vehicle interiors and safety systems. Typical procedure:

1. Park vehicle on a level surface, switch off ignition and remove key.
2. Disconnect the negative battery terminal and wait a few minutes to ensure airbag system capacitors discharge.
3. Remove required trim panels (glovebox or dashboard bezel) using plastic trim tools to avoid damage.
4. Locate the airbag switch assembly, unplug the electrical connector and remove the retaining fastener(s).
5. Fit the new switch, reconnect the connector and reassemble trim in reverse order.
6. Reconnect the battery and verify correct operation: ensure the airbag indicator behaves as expected and the switch changes the passenger airbag state. Use a diagnostic tool to read/clear any related fault codes if necessary.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1, Citroën C2, Citroën C3, Citroën C3 Pluriel, Peugeot 607
• Product Codes: 96373215XT, 95835T02, 8216E6
• Other Numbers: 8216000000

Recommendation For Installation

• Always disconnect the battery before removing or installing any airbag-related component.
• Use non-marring trim tools to prevent damage to panels and clips.
• Inspect the wiring harness and connector for corrosion, bent pins or heat damage and repair as necessary before fitting the new switch.
• After installation, verify the airbag indicator lamp and use a suitable diagnostic scanner to confirm there are no stored faults related to the occupant restraint system.
• If unsure about procedures or if faults persist, have the vehicle checked by a qualified technician with the appropriate diagnostic equipment.

Why This Part Fails

Common failure causes include mechanical wear of the switch mechanism from repeated use, contamination or corrosion of electrical contacts (especially in vehicles exposed to moisture), damage from interior impact or previous airbag deployment, and connector pin damage. Failure typically presents as the inability to change the airbag state, intermittent operation, or related fault codes appearing on the dashboard.

Searching by part numbers 96373215XT, 95835T02 or 8216E6 will help you quickly locate the correct replacement. Suitable for professional workshops and experienced DIY mechanics who need a reliable passenger airbag switch for Citroën and Peugeot models listed above.

High-quality passenger airbag on/off switch designed for Citroën and Peugeot vehicles. This switch (part numbers 96373215ZL, 8216E6) enables safe deactivation of the front passenger airbag when a rear-facing child seat is installed or when required for specific seating arrangements. Built to match OEM form and function, it provides reliable tactile feedback and a clear on/off position to ensure correct usage by technicians and DIY enthusiasts alike.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C1, Citroën C2, Citroën C3, Citroën C3 Pluriel, Peugeot 607
• Product Codes: 96373215ZL, 8216E6
• Other Numbers: 8216000000

Function

The passenger airbag switch allows the driver or service technician to manually disable the front passenger airbag. This is necessary when a child seat is placed in the front passenger position or in other situations where airbag deployment could increase risk. The switch mechanically or electronically interrupts the airbag circuit and communicates the status to the airbag indicator on the instrument panel.

Compatibility And Fitment

This switch is commonly referenced by part numbers 96373215ZL and 8216E6. It fits the listed Citroën and Peugeot models when the vehicle was originally equipped with a manual passenger airbag deactivation switch. Always verify fitment by part number and visual comparison with the original unit when possible. Common search terms include the OEM numbers and vehicle model names (Citroën C1, C2, C3, C3 Pluriel, Peugeot 607).

How To Replace

Typical replacement steps for experienced mechanics or competent DIYers:

• Disconnect the vehicle battery and wait several minutes to ensure the airbag system is de-energized.
• Access the switch location (often on the passenger side end of the dashboard or inside the glovebox) by removing the necessary trim panels using appropriate trim tools to avoid damage.
• Unplug the electrical connector and remove mounting screws or clips securing the switch.
• Install the new switch, reconnect the connector, refit trim panels, and reconnect the battery.
• Check the instrument panel airbag indicator for correct status after installation.

Installation Recommendations

• Disconnect the battery before starting work and follow the vehicle manufacturer’s procedures to avoid accidental airbag deployment.
• Use plastic trim tools to prevent scratching dashboard surfaces and avoid excessive force on plastic clips.
• Ensure connectors are clean and fully seated; apply dielectric grease only if specified by the manufacturer.
• After replacement, confirm correct indicator behavior and proper mechanical operation of the switch.

Most Common Failure Causes

Passenger airbag switches tend to fail due to mechanical wear (frequent switching with a key), corrosion or contamination of electrical contacts, impact damage from collisions, or broken actuator components. In older vehicles, plastic parts can become brittle and break during operation or removal. Regular inspection during interior work helps identify a worn or loose switch before it causes ambiguous airbag indicator states.

Why Choose This Part

Buying a correctly coded and dimension-matched switch with the OEM part numbers 96373215ZL / 8216E6 ensures proper fitment and restores safe functionality to the passenger airbag control. Suitable for professional workshops and experienced DIYers who require a direct replacement part for Citroën and Peugeot models listed above.

The Passenger Airbag Switch (part numbers 96373205XT / 8216E6) provides manual deactivation of the front passenger airbag where required — typically for safely fitting a rear-facing child seat. This replacement switch is designed to match the original equipment fitting for many Citroën and Peugeot models and is a direct-swap unit for dashboards equipped with a key/rotary airbag on/off control. Reliable contact operation and clear indicator functionality restore correct system feedback to the driver when the airbag is intentionally deactivated.

Key Features and Benefits

• Direct-fit replacement for the original passenger airbag on/off switch.
• Supports manual deactivation and provides driver-visible status indication.
• Compatible with common PSA/Stellantis wiring harnesses and dash fittings.
• Supplied with standard part numbers used in service and spare-parts searches to simplify ordering.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Passenger Airbag Switch
• Product Codes: 96373205XT, 8216E6, 8216.E6
• Additional Numbers: 8216000000

Compatible Models (Common Fitment)

• Citroën: C1, C2, C3, C3 Pluriel, C4 (including C4 B7), C4 II
• Peugeot: 107, 407, 607

Function and Symptoms Of Failure

The switch enables the driver to manually disable the front passenger airbag when necessary. A properly working switch provides a clear ON/OFF indication on the dash. Symptoms of a faulty switch include inconsistent indicator behaviour, inability to turn the passenger airbag off or on, intermittent electrical contact, warning lights related to the airbag system (SRS) or loss of the passenger airbag disable indication.

Replacement Procedure

1. Ensure safety first: Disconnect the vehicle battery and wait the manufacturer-recommended time to avoid accidental SRS deployment.
2. Remove the necessary trim panels around the dash or glovebox to access the switch housing. Use plastic trim tools to avoid damage.
3. Extract the old switch by releasing its retaining clips and disconnect the electrical connector.
4. Install the new switch, connect the electrical plug and secure the unit into the dash until clips engage.
5. Reassemble trim panels, reconnect the battery and perform a functional check: verify the dashboard passenger airbag indicator and ensure the switch changes the airbag state as expected.

Installation Recommendations

• Always disconnect the battery before starting work and follow manufacturer safety intervals for SRS systems.
• Handle the switch and surrounding electronics carefully—do not force connectors or use excessive heat.
• After installation, verify correct operation of the switch and the dash indicator. If the airbag warning lamp remains on, diagnose the SRS fault codes with appropriate diagnostic equipment.
• Use proper trim tools to avoid scratching or breaking dashboard components during removal/installation.

Most Common Failure Reasons

• Mechanical wear of the switch mechanism or key tumbler (if equipped), causing poor contact or inability to turn the switch.
• Corrosion or moisture ingress in the connector or switch contacts leading to intermittent operation.
• Damage from impact or previous repairs that deformed the mounting or wiring harness.
• Electrical faults in wiring or connectors that prevent the control signal from reaching the airbag system.

Notes For Workshops And DIYers

This part is commonly searched by OE numbers—include the product codes when ordering or searching catalogues to ensure compatibility. For faults that persist after replacement, use a qualified diagnostic tool to read SRS codes; some repairs may require clearing fault memory or checking related connectors and wiring harnesses.

High-quality replacement passenger airbag switch designed for Citroën and Peugeot dashboards. This switch allows safe deactivation of the front passenger airbag when a child seat is placed in the front or when vehicle-specific requirements demand it. Ideal for professional workshops and DIY mechanics who search by product code—fits original mounting dimensions and electrical connector for easy swap. Commonly referenced under OE codes and aftermarket part numbers, this unit delivers reliable switching action and clear ON/OFF indication to the driver.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1, C2, C3 (including C3 Pluriel); Peugeot 607
• Product Codes: 96386084XT, 96386084ZL, 8216F3, 8216E6
• Other Numbers: 96373205ZD, 8216000000

Features and Function

The passenger airbag switch provides manual control to enable or disable the front passenger airbag. It is a safety-related component used when fitting a rear-facing child seat or when the passenger seat is occupied by a person for whom an active airbag would be hazardous. The switch completes or interrupts the airbag circuit and typically works together with the vehicle’s SRS warning lamp to indicate status.

Recommended Installation

• Always work in a safe environment with the ignition off.
• Disconnect the vehicle battery and wait a few minutes to ensure the SRS system is de-energized before starting work.
• Carefully remove the trim surrounding the switch to avoid damaging clips or dash panels.
• Unplug the electrical connector and remove the old switch; note orientation and retaining tabs for correct refitment.
• Install the new switch, reconnect the connector and reassemble trim panels. Reconnect the battery and verify correct operation via the passenger airbag indicator and dashboard SRS lamp.
• If the airbag indicator remains lit or the switch does not behave as expected, inspect connector pins and wiring for corrosion or damage. Further diagnosis should be performed with appropriate SRS diagnostic tools.

Why The Part Usually Fails

• Mechanical Wear: Repeated use can wear internal contacts or the mechanical detent, causing unreliable switching.
• Contamination And Corrosion: Moisture or dirt ingress can corrode electrical contacts and prevent proper function.
• Physical Damage: Dash removal, impact, or accidental force can break plastic parts or mounting clips.
• Electrical Issues: Loose connectors, broken wires or intermittent contact in the harness can mimic switch failure.

Searching by OE or aftermarket codes (e.g., 96386084XT / 96386084ZL / 8216F3) is common among mechanics—use these references to find the correct replacement quickly. This unit is intended for professional fitment or competent DIY installation following safety procedures.

Reliable replacement passenger airbag switch designed for Citroën and Peugeot models. Ideal for professional workshops and DIY mechanics, this switch restores the ability to manually disable the front passenger airbag when a child seat or other circumstances require it. Frequently searched under part numbers 96386084ZL, 96386084XT or 96373205ZD, this unit also matches internal references 8216F3 and 8216E6, improving findability for technicians looking up OE codes.

About This Switch

The passenger airbag switch is a safety-critical component that allows the driver to deactivate the passenger-side frontal airbag when a child seat or a passenger for whom an active airbag would be hazardous is present. The switch provides a clear on/off position and typically communicates the status to the vehicle’s instrument cluster so the driver can verify correct operation. Correct selection and installation are essential for occupant safety and airbag system functionality.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C3 Picasso; Peugeot 406
• Product Codes: 96386084ZL, 96386084XT, 96373205ZD
• Additional Numbers: 8216F3, 8216E6

Installation Recommendations

• Always Disconnect The Battery Before Starting Work To Prevent Unwanted Airbag Deployment And Electrical Damage.
• Locate The Existing Switch (Commonly Mounted In The Passenger-Door Surround, Glovebox Area Or Lower Dash Panel Depending On Model) And Remove Any Trim Panels Carefully To Avoid Breaking Clips.
• Unplug The Electrical Connector And Remove Fasteners Holding The Old Switch. Fit The Replacement Unit In Reverse Order, Ensuring A Firm Connector Seat And Correct Mechanical Engagement.
• After Reinstallation, Reconnect The Battery And Verify The Airbag Status Indicator On The Instrument Cluster. If The Indicator Shows A Fault, Clear Codes With Suitable Diagnostic Equipment Or Have The Vehicle Diagnosed By A Professional.
• Follow Manufacturer Procedures And Torque Specifications For Trim Fasteners To Avoid Rattles Or Misalignment.

Why This Part Fails Most Often

• Mechanical Wear From Frequent Use Can Cause The Internal Mechanism To Become Loose Or Fail To Engage Securely.
• Corrosion Or Contamination Of Electrical Contacts Leads To Intermittent Operation Or Loss Of Signal To The Airbag System.
• Physical Damage From Impact Or Improper Removal/Installation Of Interior Trim Can Break The Switch Housing Or Actuator.
• Electrical Issues Such As Short Circuits Or Connector Damage May Prevent Proper Communication With The Vehicle’s Airbag Indicator.

Notes For Professionals And Enthusiasts

This switch is a direct-fit replacement when matching the listed product codes and vehicle applications. Because it is a safety-related part, verify correct mechanical operation and instrument-cluster indication after fitment. If the airbag warning lamp remains illuminated, diagnose the airbag system with appropriate diagnostic tools to confirm no additional faults are present.

Compatibility And Search Tips

Search Using Any Of The Provided Part Numbers (96386084ZL, 96386084XT, 96373205ZD) Or Additional References (8216F3, 8216E6) To Locate This Switch For Citroën And Peugeot Applications. Including The OE Codes In Your Query Will Increase The Chance Of An Exact Match.