This original-style right-hand exterior mirror assembly is designed for Citroën C8 and Peugeot 807 models and is a suitable replacement for workshops and DIY enthusiasts who need a direct-fit electric mirror with folding function and outside temperature sensing. The unit preserves factory connectivity (10-pin, split 6+2+2) for easy plug-and-play installation on compatible vehicles. The outer painted part shows minor cosmetic abrasion but does not affect mechanical or electrical function. Ideal for mechanics looking for a quick, reliable repair using familiar part numbers.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C8, Peugeot 807
• Product Codes: 14009349YJ, 14009349ZR, 8153FV
• Additional Numbers: Color Code EYJ (Aster Gray)
• Connector: 10-pin (arranged 6+2+2)
• Features: Electric Adjustment, Electric Folding, External Temperature Sensor
• Side: Passenger (Right-Hand)

Installation Recommendations

Recommended for experienced technicians and competent DIY mechanics. Typical replacement steps:

• Remove interior door trim or triangular mirror cover to access mounting screws and connector.
• Carefully disconnect the 10-pin electrical connector (note the 6+2+2 arrangement) and any adhesive or clips holding the mirror wiring harness.
• Support the mirror assembly from the outside, remove the mounting bolts, then extract the mirror from the door.
• Fit the new mirror assembly, loosely start the bolts, reconnect the electrical connector and test functions (adjustment, folding, heating if present, and temperature sensor) before final torquing.
• Tighten mounting bolts to manufacturer torque where available, refit the interior trim and verify door operation.

Practical tips: Protect painted surfaces during installation, check wiring and connector pins for corrosion before assembly, and calibrate mirror adjustment after reconnection. Allow 20–45 minutes for a professional replacement depending on door trim complexity.

Reason For Most Common Failure

• Impact and Physical Damage: Collisions or knocks while parking are the most frequent causes of mirror breakage or deformation.
• Moisture Ingress and Corrosion: Water penetration can corrode connectors, motor gears or the folding actuator, leading to intermittent or permanent failure.
• Wear of Actuator Gears or Motor: Repeated use and aging can wear the small electric motors or plastic gear teeth inside the folding/adjustment mechanism.
• Wiring And Connector Issues: Bent pins, damaged wiring or poor contacts in the 10-pin plug (6+2+2) cause loss of function for adjustment, folding or the temperature sensor.
• Cosmetic Damage: Painted surfaces are vulnerable to scratches and scuffs; the supplied unit has a slight abrasion on the colored section as noted.

This mirror assembly offers a direct, parts-number oriented replacement for Citroën C8 and Peugeot 807 vehicles, matching original connectivity and functions to shorten workshop time and restore vehicle convenience features quickly.

This right-side electric folding exterior mirror is a practical replacement for Citroën C8 and Peugeot 807 vehicles, aimed at professional mechanics and experienced DIY enthusiasts. The unit combines power adjustment, electric folding and an integrated outside temperature sensor, making it a complete mirror assembly for passenger-side replacement. Commonly searched by product codes 14009349ZR and 8153FV, this mirror suits repairs after impact damage or when electrical components fail.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C8; Peugeot 807
• Product Codes: 14009349ZR, 8153FV, EZRC
• Additional Numbers: 10-Pin Connector (6+2+2); Passenger Side; External Temperature Sensor

Installation Recommendations

Replacement is straightforward for a trained mechanic or competent DIYer with basic tools. Typical steps:

• Remove the interior door trim or access cover to reach the mirror mounting area.
• Disconnect the electrical connector (10-pin, arranged as 6+2+2) and any sensor wires carefully to avoid damaging terminals.
• Unscrew the mirror mounting bolts/nuts, support the mirror while removing fasteners to prevent dropping or scratching the door.
• Fit the new mirror, hand-tighten fasteners, reconnect the wiring and test adjustment, folding function and temperature sensor before reassembling the trim.
• Use plastic trim tools to avoid damaging panels and verify all functions (adjust motors, folding, heater if present, sensor output) prior to final assembly.

Why This Part Most Commonly Fails

• Impact Damage: Knocks from traffic, parking or road debris frequently crack or misalign the mirror housing or glass.
• Water Ingress And Corrosion: Moisture can corrode connectors, motor gears or sensor contacts, leading to intermittent or total electrical failure.
• Wear In Folding Mechanism: Repeated folding cycles and worn gears or plastic components can cause the folding action to stick or fail.
• Connector And Wiring Damage: Broken wires or damaged pins at the 10-pin connector cause loss of functions such as adjustment or the temperature sensor.
• Cosmetic Wear: Painted surfaces are prone to scratches and scuffs; the listed unit has a slightly scratched colored section.

Expected durability depends largely on exposure and incidents. Under normal conditions the electrical mirror can last the life of the vehicle, but is vulnerable to external impacts and water-related electrical faults that are the most common causes of replacement.

This right side rearview mirror is electrically controlled and foldable, designed specifically for the Citroën C8 and Peugeot 807 models. It features the KTQ Moondust paint finish with a slight scratch on the colored surface and one connector missing its cover. The mirror is equipped with a 10 PIN connector arranged as 6+2+2 pins, ensuring straightforward installation.

Integrated into the mirror is an exterior temperature sensor, providing valuable data for the vehicle’s climate control system. The mirror is intended for the passenger side, significantly enhancing driving safety and comfort through its electric adjustment and folding capabilities.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model Compatibility: Citroën C8, Peugeot 807
• Product Codes: 14009349ZW, 140093499Q, 8153FV
• Additional Codes: KTQ
• Side: Passenger Side (Right)

Function and Maintenance

Side mirrors play a critical role in vehicle safety, especially in dense traffic and parking scenarios. The electric control system allows quick adjustments for optimal visibility and convenience. Folding capability helps protect the mirror from damage when parked in narrow spaces.

This specific mirror is a reliable replacement part suitable for professional mechanics and DIY enthusiasts seeking a functional and visually fitting component. Installation is simple thanks to the standardized 10 PIN connector, which ensures seamless integration without major modifications.

To maintain optimal operation, regular inspection of the connectors and cleanliness of the mirror surface is recommended. This mirror is ready to be installed immediately on your Citroën C8 or Peugeot 807, restoring the original functionality and appearance.

This right-side electric folding mirror is designed specifically for Citroën C8 and Peugeot 807 models. It features an integrated external temperature sensor, providing valuable outside temperature readings to enhance driver awareness. The mirror is equipped with a 10-pin connector (6+2+2 configuration), ensuring easy installation and full compatibility with the vehicle’s electrical system.

The mirror’s green Ethel paint finish adds an aesthetic touch, though please note the painted surface shows slight scratches. Positioned on the passenger side, this mirror is crucial for optimal visibility, contributing to safer driving in various conditions such as highway travel and parking maneuvers.

Technical Information

Manufacturer: PSA Citroën Peugeot
Model: Citroën C8, Peugeot 807
Product Codes: 14009349S2, 14009341S2, 8153FV
Additional Numbers: KGB

This replacement part is ideal for professional mechanics and DIY car enthusiasts looking for a reliable, well-fitting component. The product delivers dependable performance to maintain safety and functionality in your vehicle’s side mirror system.

This right side electric folding side mirror in EZW grey paint (metallic) is designed for Citroën C8 and Peugeot 807. It fits the passenger side and includes an external temperature sensor. OEM codes: 14009349ZW, 8153FV. Ideal for professional mechanics and competent DIY installers seeking a direct-fit replacement.

Features & Function

The unit provides adjustable rear visibility via an electric motor and folds electrically to reduce the risk of damage when parked or during tight maneuvers. The integrated external temperature sensor supplies ambient temperature data to the vehicle systems and dashboard display. Common failure modes include motor wear, broken folding gears, connector corrosion or damage from impacts and water ingress.

Replacement & Installation

General replacement requires access behind the door trim to reach the mirror mounting bolts and the electrical connector. Before starting, disconnect the battery to avoid short circuits. Remove the internal trim or access panel, unplug the connector, unscrew the mirror bolts and remove the old unit. Fit the new mirror, reconnect the electrical plug and verify electric adjustment, folding operation and temperature sensor readings. Some vehicles may require a quick function check or basic coding via a diagnostic tool; consult vehicle service information if necessary.

Technical Information

• Manufacturer: PSA / Citroën Peugeot
• Model: Citroën C8, Peugeot 807
• Product Codes: 14009349ZW, 8153FV
• Other Numbers: PSA, CITROEN, PEUGEOT
• Side: Right / Passenger
• Color: EZW – Grey Metallic
• Features: Electric Adjustment, Electric Folding, External Temperature Sensor

Notes: Verify compatibility with your vehicle by checking OEM part numbers and connector type before installation. If the mirror housing or sensor is damaged, replace the complete unit to ensure proper fit and function.