This left-hand exterior mirror is a direct-fit replacement for Citroën C8 and Peugeot 807 models and is ideal for professional workshops and DIY mechanics who expect reliable electrical folding and adjustment. The unit preserves original mounting points and the 9-pin connector configuration commonly used on these models, making it simple to identify by product numbers 14009348YJ and 8153FS. The mirror housing is finished in Color Code EYJ (Gray Aster) and shows minor paint scuffs typical of a used part.

The mirror provides electric adjustment and power folding to improve parking convenience and reduce damage in tight spaces. The 9-pin (5+2+2) plug supports multiple electrical functions; confirm the pinout against vehicle wiring diagrams when integrating additional features. The assembly is supplied as a complete mirror head for straightforward replacement of the original unit.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C8, Peugeot 807
• Product Codes: 14009348YJ, 8153FS, EYJC
• Additional Numbers: 9-Pin Connector (5+2+2)

Installation Recommendations

• Preparation: Park the vehicle on a level surface, set the ignition off and, if preferred for safety when working near airbags or door electronics, disconnect the negative battery terminal.
• Door Trim Removal: Remove the inner door trim or triangular trim panel carefully to access the mirror mounting bolts and electrical connector. Use trim tools to avoid damaging clips and upholstery.
• Electrical Connector: Unplug the 9-pin connector and inspect pins for corrosion or damage. Clean contacts if necessary before installation.
• Mounting: Support the mirror from the outside while removing the fasteners. Fit the replacement mirror, tighten bolts to the manufacturer’s recommended torque, and reconnect the electrical plug.
• Adjustment and Test: Reconnect the battery (if disconnected) and test all mirror functions—adjustment, power folding and any other electrical features—before reassembling the door trim.
• Finish: If the painted area needs cosmetic attention, use touch-up paint matched to Color Code EYJ and avoid oversanding near seams.

Common Failure Causes

• Impact Damage: Collisions or side-swipe incidents are the most frequent causes of mirror failure—broken housings, cracked glass or damaged folding mechanisms.
• Water Ingress and Corrosion: Moisture entry can corrode electrical contacts and motor components, leading to intermittent operation or complete failure of power functions.
• Wear of Mechanical Components: Gears and pivot joints wear over time, causing noisy or sluggish folding and adjustment.
• Connector And Wiring Issues: Damaged wires, bent pins in the 9-pin plug or poor grounding can produce loss of function; inspect the harness when diagnosing mirror faults.
• Age And Environmental Stress: Long-term exposure to UV, temperature cycles and road debris shortens service life; expected longevity depends on use and conditions but many units show issues after several years of service.

Searchable Product Codes: 14009348YJ, 8153FS, EYJC — these identifiers are often used by repair shops and parts databases to quickly locate the correct replacement mirror for Citroën C8 and Peugeot 807 vehicles.

This left-hand electric folding mirror is a practical replacement for workshops and DIY enthusiasts working on Citroën C8 and Peugeot 807 vehicles. Designed to restore full electrical adjustment and folding functions, the unit comes in Grey Aluminium (EZR) finish and is suitable for driver-side fitment. The housing shows a minor paint scuff but is fully functional electrically.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C8, Peugeot 807 (Driver Side)
• Product Codes: 8153FS, 14009348ZR
• Additional Numbers: 140093338ZR, EZRC
• Connector: 9 Pin (configured 5+2+2)
• Color: EZR – Grey Aluminium Paint

Features & Function

The mirror provides electric adjustment and electric folding capability for convenient operation from inside the vehicle. The 9-pin connector supports multiple electrical functions required by the original equipment. The painted cover matches vehicles specified with EZR Grey Aluminium exterior trim.

Compatibility

Fits left (driver) side on Citroën C8 and Peugeot 807 models that use a 9-pin mirror connector. Check that your vehicle’s mirror wiring and mounting points match the 9-pin (5+2+2) configuration to ensure direct fitment.

Installation Recommendations

• Recommended Tools: Trim removal tools, Torx/screwdriver set, socket set, and torque wrench.
• Safety: Disconnect the vehicle battery before disconnecting electrical connectors to avoid short circuits or airbag system faults.
• Procedure Overview: Remove interior door trim to access mirror mounting bolts, disconnect the 9-pin connector, unfasten mirror retaining bolts, remove the old mirror, fit the replacement, reconnect the connector, secure bolts to correct torque and test all electrical functions (adjustment, folding, heating if applicable) before reassembling the door trim.
• Time & Skill: Typical replacement time 30–60 minutes depending on familiarity with door trim removal. Suitable for experienced DIY mechanics and professional workshops.

Why This Part Typically Fails

• Impact Damage: Side collisions or knocks are the most common cause of mirror breakage or housing damage.
• Wear Of Electric Mechanisms: Repeated folding and adjustment can wear actuators and motors over time.
• Connector Corrosion Or Wiring Faults: Moisture ingress or wire fatigue at the connector can cause intermittent or complete electrical failure.
• Housing And Paint Damage: Stones, scratches and environmental exposure lead to cosmetic degradation; the listed unit has a slight paint scuff but remains fully functional.

Part numbers included in the listing (8153FS, 14009348ZR, 140093338ZR) are frequently used by mechanics when searching for compatible mirrors for Citroën C8 and Peugeot 807 vehicles, increasing the chance of finding the correct replacement quickly.

High-quality used left exterior mirror designed for Citroën C8 and Peugeot 807 models. Ideal for professional workshops and DIY enthusiasts who require a direct-fit replacement part with original mounting points and electrical connector configuration. This mirror assembly preserves vehicle functionality such as electric adjustment and power folding via the 9-pin connector and matches the original body-color finish (KGB – Green Ethel) with only minor cosmetic wear on the painted section.

Key Features

– Direct Fit For Citroën C8 And Peugeot 807
– Electrically Adjustable And Power Folding Design
– 9-Pin Connector (5+2+2) For Multiple Electrical Functions
– Driver Side Assembly
– Painted In KGB – Green Ethel (Painted Area Slightly Scuffed)

Why Choose This Mirror

This mirror is a practical and cost-effective solution when replacing a damaged or non-functional left-side mirror on compatible Stellantis MPV models. The original connector layout and mounting make installation straightforward for technicians, reducing workshop time. Product codes and common reference numbers are included to help you find this exact replacement quickly during parts lookup.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C8; Peugeot 807
• Product Codes: 14009348S2; 14009338S2; 8153FS
• Additional Numbers: Color KGB – Green Ethel; 9-Pin Connector (5+2+2)

Installation Recommendations

• Disconnect the battery before starting work to avoid short circuits when handling electrical connectors.
• Carefully remove the interior door trim to access the mirror mounting bolts and electrical connector; keep clips and screws for reassembly.
• Unplug the 9-pin connector and remove the mounting bolts. Fit the replacement mirror, connect the wiring, and test all electrical functions (adjustment and folding) before refitting the door trim.
• Inspect connector pins for corrosion and ensure a secure, corrosion-free connection. Replace any damaged clips or gaskets to preserve water sealing.
• If the vehicle is equipped with memory or auto-dimming options, perform any required calibration or initialization following manufacturer procedures after installation.

Most Common Reasons For Failure

• Mechanical Damage: Impact from collisions or knocks is the most frequent cause of mirror breakage or housing damage.
• Motor Or Actuator Wear: Repeated use or ingress of moisture can cause motors or folding actuators to seize or fail.
• Electrical Problems: Corroded connector pins, wiring damage inside the door harness, or blown fuses can disable adjustment or folding functions.
• Cosmetic Degradation: Paint scuffs and surface abrasion occur from stones, scraping, or prolonged exposure to environmental factors.

Practical Tips

• Test Mirror Functions Before Final Assembly: Verifying movement and folding while the door remains accessible saves time in case of faults.
• Use Manufacturer-Grade Fasteners: Reuse or replace mounting bolts and clips with OEM-spec parts to ensure correct alignment and vibration resistance.
• Address Water Ingress: Replace worn seals and insulators to prevent future electrical or mechanical failures due to moisture.

This left electric folding side mirror is designed for Citroën C8 and Peugeot 807 models. It comes with electrical controls for precise adjustment and folding capabilities to enhance convenience and vehicle safety. Despite minor surface paint scratches typical for used parts, the mirror’s full functionality remains intact, providing a clear and distortion-free reflection essential for safe driving.

The mirror features a 9-pin connector configuration (5+2+2), ensuring compatibility with the vehicle’s original wiring harness and seamless integration. Positioned on the driver's side, it helps maintain optimal visibility, crucial for navigating urban environments and highways safely.

Installation and Usage

Replacing the left side mirror is straightforward for anyone with basic mechanical skills. Typically, the old mirror is removed by detaching door panel screws and unplugging the electrical connector, followed by fitting the new mirror and reconnecting all components. Regular maintenance and inspection are recommended, as side mirrors can deteriorate due to environmental exposure or minor impacts.

Why It May Fail

Common reasons for side mirror failure include electrical malfunction of the control motors, damage from collisions, or wear on the folding mechanism. Addressing such issues promptly ensures continued safety and vehicle readiness.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Models: Citroën C8, Peugeot 807
• Product Codes: 140093489Q, 14009348ZW, 8153FS, KTQ
• Additional Numbers: 9 PIN 5+2+2

Order today to restore your Citroën or Peugeot with a reliable left side mirror that balances quality and value. Quick delivery and satisfaction guaranteed for both professional auto technicians and car owners conducting their own repairs.

Technical Information

• Manufacturer: PSA (Peugeot Citroën)
• Model: Citroën C8; Peugeot 807
• Product Codes: 14009348ZW; 8153FS
• Additional Numbers: EZW (paint code) – Grey Metallic

Function and Features

This exterior mirror is electrically adjustable and electrically foldable, providing precise mirror position control and convenient folding to protect the mirror on narrow streets or when parked. It houses the adjustment motor and folding mechanism and is supplied ready to fit the left (driver) side.

Compatibility and Fitment

Intended for Citroën C8 and Peugeot 807 models that use OEM codes 14009348ZW or 8153FS. Verify the part numbers and connector type on your vehicle before purchase to ensure fitment. The mirror is painted in EZW Grey Metallic to match factory finishes where applicable.

Installation Notes

• Access the mirror mounting by removing the interior door trim or triangular mirror cover on the driver side.
• Disconnect the electrical connector and remove the retaining nuts/bolts holding the mirror to the door.
• Fit the new mirror, secure fasteners to the original torque specification, reconnect wiring and test adjustment and folding functions before reassembling the door trim.
• If the mirror has heated glass or additional features, confirm connector pinout compatibility prior to installation.

Common Failure Modes And Maintenance

Mirrors commonly fail due to impact damage, wear of the adjustment motor, water ingress causing corrosion, or broken folding gears. Regular inspection after minor impacts and prompt replacement of cracked glass or damaged housings will maintain safety and visibility. This replacement part restores original functionality and appearance when the OE item is worn or damaged.