This painted left exterior mirror is a direct-fit replacement designed for Citroën C1 and Peugeot 107 models. Supplied in Lipizzan White (KWD), the assembly restores original appearance and function for door-mounted mirrors. Ideal for professional workshops and DIY mechanics who look up parts by OEM numbers, the unit matches factory fitment and mounting points to simplify installation.

Key Features

– Direct-fit left (driver) side door mirror assembly for Citroën C1 / Peugeot 107.
– Painted Finish: Lipizzan White (KWD) — ready to install without additional painting.
– OEM Reference Numbers Included For Easy Identification And Search.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1, Peugeot 107
• Product Codes: 87940-0H010, 87940-0H011
• Additional Numbers: 8153YW, 815290, KWD

Installation Recommendations

Replacement is straightforward for anyone with basic workshop tools. Typical steps:

• Remove the interior triangular trim on the door to access the mirror mounting nuts — use a trim tool to avoid damage.
• Support the mirror from outside, then remove the retaining nuts/bolts securing the mirror to the door.
• Carefully disconnect the electrical connector if the mirror has power adjustment/heating. If unsure, isolate the battery before working on electrical connections to prevent short circuits.
• Fit the new mirror assembly, reconnect the wiring harness, and tighten the mounting nuts to the manufacturer’s specified torque. Replace trim and confirm mirror adjustment and any electrical functions operate correctly.

Recommended Tools: Trim panel tool, socket set or Torx depending on vehicle variant, and a torque wrench for final tightening. Take care not to overtighten plastic studs to avoid cracking the mirror base or door skin.

Why This Part Fails Most Often

Door mirrors typically fail due to external mechanical damage (side impacts, parking collisions) or gradual wear of the internal adjustment motor/gear. Other common causes include water ingress and corrosion of electrical connectors on powered mirrors, or paint and housing deterioration from prolonged exposure to the elements. In many cases the glass can crack from impacts while the housing may split or the mount break during minor collisions.

Fitment Notes

Designed For Driver Side (Left) Fitment. Confirm The Correct OEM Number When Searching Or Ordering To Ensure Exact Match With Your Vehicle Variant. The Listed Product Codes Are Commonly Used References For These Models.

This left exterior mirror is a direct-fit replacement for Citroën C1 and Peugeot 107 models finished in KTB Gallium gray paint. Designed for mechanics and DIY enthusiasts, the unit restores lateral visibility and vehicle appearance after impact or paint damage. The painted cover matches factory KTB Gallium Gray and the assembly fits the driver side (left) mounting points used on original equipment.

Key Features And Benefits

– Direct replacement designed to match factory mounting and finish, helping to simplify installation and maintain vehicle aesthetics.
– Painted KTB Gallium Gray cover for consistent color match on vehicles finished in this factory shade.
– Suitable for routine collision repair, bodywork restoration or cosmetic replacement on Citroën C1 and Peugeot 107.

How To Replace

Replacement is straightforward for experienced technicians and competent DIYers. Typical steps:

• Remove interior door trim panel or access cover to reach mirror mounting screws and electrical connector.
• Disconnect any electrical connector if present (mirror adjustment/heating). If connector is present, label wiring to ensure correct reconnection.
• Unscrew the mirror retaining nuts/bolts and remove the old assembly from the door.
• Fit the new mirror assembly, secure the retaining nuts/bolts to specified torque, reconnect any electrical connector and check adjustment.
• Reinstall the interior trim and verify proper operation and paint match.

Mounting Recommendations

– Work On A Stable Surface With The Vehicle Parked And Handbrake Engaged.
– If The Mirror Contains Electrical Components, Disconnect The Battery Before Starting Work To Avoid Short Circuits And Accidental Deployment Of Safety Systems.
– Use Correct Torque For Mounting Fasteners To Avoid Damage To Mirror Housing Or Door Sheet Metal.
– Check Door Trim Clips During Reassembly And Replace Any Broken Clips To Prevent Rattles.

Most Common Failure Causes

– Impact Damage From Minor Collisions Or Parking Incidents Causing Broken Housing Or Detached Mirror Glass.
– Mechanical Wear Or Breakage Of Internal Pivot Or Folding Mechanism After Repeated Use Or Forceful Folding.
– Paint Damaged By Road Debris Or Corrosion On Older Vehicles Leading To Cosmetic Degradation.
– Electrical Connector Corrosion Or Wire Damage (On Equipped Versions) Causing Intermittent Adjustment Or Heating Failure.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1 / Peugeot 107
• Product Codes: 87940-0H010
• Other Numbers: 8149YE, 8153YW, 815290, KTB (Color Code)
• Color: KTB – Gallium Gray (Painted Cover)
• Side: Left / Driver’s Side

Notes For Buyers

Confirm that the vehicle uses the same mounting pattern and paint code when ordering. Depending on factory equipment level, the mirror may be a simple manual-adjust type or include electrical adjustment/heating—verify fitment and connector type before installation. This listing is focused on compatibility with Citroën C1 and Peugeot 107 models and includes the common OEM reference numbers to assist in finding the correct part (e.g., 87940-0H010, 8149YE).

This left exterior mirror is a direct-fit replacement for Citroën C1, Peugeot 107 and Toyota Aygo models that use the listed part numbers. The unit is supplied in a black, unpainted finish ready for final painting to match the vehicle. Often searched by OEM numbers, this mirror assembly restores safe rearward visibility and the original appearance after impact or wear.

Function And Application

The mirror assembly provides the driver with required rearward vision and integrates mounting points and interfaces for adjustment and, where applicable, electrical connectors. It is intended as a replacement for damaged or worn left-side exterior mirror units on compatible vehicles. Depending on vehicle specification, the original assembly may include manual or electrically adjustable mechanisms and/or heating elements; ensure the part numbers match the vehicle requirement.

Compatibility

• Citroën C1
• Peugeot 107
• Toyota Aygo
• Fits vehicles equipped with the following reference numbers

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C1, Peugeot 107, Toyota Aygo
• Product Codes: 87940-0H010, 87940-0H011
• Other Numbers: 8153YW, 815290

Installation Recommendation

Recommended For Professional Or Experienced DIY Installation. Typical Replacement Steps: Fold mirror (if possible), remove interior door trim to access mounting nuts, disconnect any electrical connectors (if equipped), remove the mounting bolts and withdraw the old unit. Install the new mirror by reversing the procedure, tighten mounts to manufacturer torque, reconnect electrical connectors and test all functions (adjustment, heating, folding). When working with electrical connectors, disconnect the negative battery terminal before starting to avoid short circuits or electrical damage. Use correct tools and follow manufacturer access procedures to avoid breaking clips or trim.

Why This Part Most Often Fails

• Impact Damage: Collisions, curb strikes or door impacts are the most common causes of broken housings or cracked glass.
• Wear And Corrosion: Corrosion of mounting points and fasteners or long-term wear of adjustment gears can lead to looseness or failure.
• Water Ingress: Seals and connector corrosion can cause electrical adjustment motors or heating elements to fail.
• Vibration And Fatigue: Repeated stress and vibration over years can degrade internal mechanisms.

Practical Tips

• Verify That The Listed Product Codes Match The Original Part Number On The Vehicle.
• Replace Corroded Fasteners And Retainers To Ensure Secure Mounting.
• If Painting, Prepare Surface According To Paint Supplier Instructions For Durable Finish.
• After Installation, Confirm Proper Adjustment Range And Fold/Heater Operation (If Applicable).

Ordered by OEM reference numbers 87940-0H010, 87940-0H011, 8153YW and 815290, this left-side black unpainted mirror is a practical replacement for restoring function and appearance on Citroën C1, Peugeot 107 and Toyota Aygo vehicles.

This left (driver’s side) exterior mirror assembly is a direct-fit replacement for Citroën C1 and Peugeot 107 models. Finished in KWD Lipizan White paint, the unit restores original appearance and side visibility after damage or wear. The assembly is suitable for workshop professionals and experienced DIYers who require a reliable, factory-style replacement part identified frequently by product numbers.

Technical Information

Manufacturer: Citroën / Peugeot (Stellantis)
Model: Citroën C1; Peugeot 107
Product Codes: 87940-0H010, 87940-0H011
Other Numbers: 8153YW, 815290, KWD
Side: Left (Driver’s Side)
Finish: Painted Lipizan White (KWD)

Function And What To Expect

The mirror provides the driver with a clear lateral rearward view and restores the vehicle’s exterior appearance. Depending on vehicle specification, the assembly may contain the mirror glass, painted cover, and the mechanical or electrical adjuster/folding mechanism as originally fitted. Confirm the unit matches the required features for your trim level (manual/electric adjust, heated glass or folding mechanism) by checking the product codes.

Common Reasons For Failure

• Impact Damage: Most common cause — collisions, door knocks in car parks, or road debris can crack the glass or break the housing.
• Wear Of Mechanism: Repeated use can wear electric motors, gears or folding pivots causing poor adjustment or failure to fold.
• Electrical Issues: Corroded connectors or damaged wiring looms lead to intermittent or lost power to adjusters/heaters.
• Corrosion And Age: Moisture ingress and corrosion can seize moving parts or degrade internal components over time.

Recommended Installation

Suitable for professional workshops and competent DIY mechanics. Typical replacement steps:

• Remove the interior trim or triangular sail panel covering the mirror mounting area to access the fixing nuts.
• Support the mirror assembly from the outside, then disconnect any electrical connectors (mirror adjuster/heater) if present.
• Remove the retaining nuts/bolts holding the mirror to the door and carefully withdraw the old assembly.
• Fit the new mirror, align and hand-start fasteners, then tighten securely. Reconnect electrical plugs and check all functions (adjustment, heating, folding) before reassembling the interior trim.
• Test the mirror operation from the driver’s seat and make final adjustments as required.

Notes For Fitment

Check the product codes (87940-0H010 / 87940-0H011) against the vehicle and desired features. Because mirror variants may differ by equipment level (manual vs. electric adjust, heated glass, folding mechanism), confirm the physical connector and mounting match the original unit prior to installation. The painted finish is Lipizan White (KWD) to match factory exterior paint.

Well suited for routine repairs after impact or for replacing worn mirror assemblies. Order by product code to ensure quick identification and correct fit for Citroën C1 and Peugeot 107 vehicles.

Product Overview

Direct-fit left side exterior mirror designed for Citroën C1 and Peugeot 107. This lacquered unit in Citrus Yellow (Color Code KBL) matches factory paint and carries common OEM references 87940-0H010 / 87940-0H011 and supplementary numbers 8153YW / 815290, making it easy to find by part number when searching spare parts catalogues. Ideal for professional workshops and experienced DIYers who need a reliable visual and functional replacement after impact damage or wear.

Key Benefits

• Direct Replacement: Fits original mounting points for a clean, factory-style installation.
• Painted Finish: Delivered in KBL Lacquered Citrus Yellow for optimal color match with factory paint.
• Part Number Search Friendly: Includes common OEM codes (87940-0H010, 87940-0H011, 8153YW, 815290) for quick lookup.
• Workshop and DIY Ready: Suitable for mechanics and competent vehicle owners familiar with door trim removal and electrical connectors.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1, Peugeot 107
• Product Codes: 87940-0H010, 87940-0H011
• Other Numbers: 8153YW, 815290

Function And Common Faults

The exterior mirror provides rearward visibility and, depending on vehicle specification, can contain electric adjustment motors, heating elements and folding mechanisms. The most common causes of mirror failure are impact damage (parking knocks, side collisions), water ingress leading to corrosion or electrical faults, wear of the folding mechanism, and broken glass or damaged mirror housings. Cosmetic paint damage is frequent in urban driving environments.

How To Replace

1. Park Vehicle Safely And Disconnect Power: Park on level ground and engage the handbrake. If the mirror has electrical functions, disconnect the negative battery terminal or otherwise isolate vehicle power before unplugging connectors.
2. Remove Interior Door Trim: Carefully remove the triangular trim cover on the inside of the door to access mirror fasteners, using trim tools to avoid damaging clips and upholstery.
3. Disconnect Electrical Connector: Unplug any mirror wiring harness (adjustment motor/heater) before unbolting the mirror from the door.
4. Remove Mounting Bolts And Extract Mirror: Support the mirror from outside while removing bolts to prevent it from dropping. Remove the old unit and clean the mounting surface.
5. Fit New Mirror And Test: Install the new mirror, tighten fasteners to factory specification, reconnect the electrical connector, and test adjustment and heating functions before reassembling door trim.
6. Final Check: Ensure mirror alignment, folding operation and paint match. Refit interior trim and restore battery connection if disconnected.

Recommendations For Installation

• Use Appropriate Tools: Plastic trim tools protect interior panels. A torque wrench is recommended to tighten mirror mounting bolts to the manufacturer’s torque setting.
• Check Color Code: Confirm Color Code KBL (Citrus Yellow) for paint match to avoid visible shade differences.
• Protect Painted Surfaces: Mask surrounding paint during removal/installation to prevent scratches.
• Electrical Safety: If the mirror has electrical functions, isolate the battery and carefully inspect connectors for corrosion before installation.

Why This Part Is A Good Choice

This mirror offers a factory-style replacement with OEM cross-references that help ensure fit and finish equivalent to the original unit. It is suitable for repair jobs after common parking impacts and for bodyshop refits where color-matched, direct-fit parts reduce installation time and complexity.

Typical Search Keywords

Left Mirror Citroën C1, Driver Side Mirror Peugeot 107, 87940-0H010, 87940-0H011, 8153YW, 815290, Lacquered Citrus Yellow Mirror