Overview

High-quality replacement right (passenger-side) exterior mirror designed for Citroën C5 models. This complete mirror assembly offers electric adjustment, electric folding, integrated heating and a temperature sensor for reliable demisting. The unit is supplied in EWP (White Banquise) paint and uses a 12-pin (6+6) connector. Ideal for professional workshops and DIY mechanics looking for a direct-fit component identified by common part numbers.

Key Benefits

• Direct replacement for passenger-side mirror assemblies on many Citroën C5 vehicles — minimizes fitting time.
• Electric folding saves clearance and protects the mirror during tight parking situations.
• Heated glass and temperature sensor improve visibility in cold and damp conditions.
• 12-pin connector (6+6) ensures full functionality with electric adjustment and heating circuits.
• Part-number searchable (common practice for mechanics) — speeds up identification and ordering.

Typical Applications / Compatible Models

Fits Citroën C5 models from 2005 and can be compatible with some earlier model years depending on trim and original equipment. Often found on both First and Second Generation C5 variants where the 12-pin connector and passenger-side configuration match. Always match the connector type, mounting points and part numbers when confirming fitment.

How To Replace (Basic Guide for Mechanics and DIY)

1. Park the vehicle on level ground and disconnect the battery before starting work to avoid short circuits and airbag/vehicle electronics issues.
2. Remove the interior door trim or the mirror access panel to expose the mirror mounting screws and electrical connector.
3. Carefully unplug the 12-pin connector (6+6) and release any retaining clips; note connector orientation for reassembly.
4. Unscrew the mirror mounting nuts or bolts and lift the old mirror assembly away from the door.
5. Fit the replacement mirror, hand-thread the mounting fasteners, then torque to the manufacturer’s specification.
6. Reconnect the electrical connector, replace trim panels, reconnect the battery and test mirror adjustment, folding and heating functions.
7. Check mirror glass alignment and ensure folding mechanism operates smoothly without binding.

Why Mirrors Fail (Most Common Causes)

• Impact Damage: Bumps and collisions are the most frequent cause of broken or misaligned mirrors.
• Water Ingress And Corrosion: Moisture can corrode the motor or connector pins, degrading electrical function over time.
• Motor Wear: Repeated folding/adjustment cycles can wear out small electric motors or gear trains.
• Heater Element Faults: Heating elements or internal wiring can fail from thermal cycling or moisture.
• Connector Issues: Bent or corroded pins in the 12-pin connector can cause intermittent or total loss of functions.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C5 (Passenger Side)
• Product Codes: 96532993XT, 532993XT, 8149WH
• Additional Numbers: EWPB (Color Code EWP), 12-Pin (6+6)

Installation Recommendations

• Always disconnect the battery prior to removal and installation to protect vehicle electronics.
• Inspect and clean the connector pins before mating to prevent poor contact; use dielectric grease if appropriate.
• Replace any damaged mounting hardware or foam seals to ensure a secure, watertight fitment.
• Test all electrical functions (adjustment, folding, heating) before final reassembly of door trims.
• Follow manufacturer torque settings for mirror fasteners to avoid panel distortion or loosening.

Reason This Part Adds Value

Replacing a damaged or malfunctioning mirror with a complete, electrically equipped assembly restores full functionality quickly — improving safety, comfort and vehicle appearance. The supplied part numbers and connector specification make identification straightforward for busy workshops and DIY enthusiasts alike.

This right-hand exterior mirror (8149WH / EZWD) is a practical replacement for workshops and DIY mechanics working on Citroën C5 vehicles. The mirror Offers Electric Adjustment, Electric Folding, Integrated Heating And An Ambient Temperature Sensor — All Designed To Restore Full Functionality After Impact Or Wear. The Unit Is Sold As Shown: Slight Surface Scratches On The Paint And Frame Are Present, But The Mirror Is Mechanically And Electrically Functional.

Key Features And Benefits

• Direct Fit For Many Citroën C5 Applications — Keeps Original Adjustment And Folding Functions.
• Electric Folding Mechanism For Convenience And Protection When Parking.
• Integrated Heating To Prevent Fogging And Ice Build-Up In Cold Conditions.
• Built-In Temperature Sensor For Climate-Related Systems That Rely On External Temperature Input.
• Includes Product Code 8149WH / EZWD For Easier Lookup And Matching.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C5 (From 2005; May Fit Some Pre-2005 Models)
• Product Codes: 8149WH, EZWD
• Other Numbers: —

Installation Recommendations

• Disconnect The Battery Before Starting Work To Avoid Short Circuits And Protect Electronic Components.
• Remove The Interior Door Trim Carefully To Access Mirror Fastenings; Retain Fasteners And Clips For Reuse If Undamaged.
• Disconnect Electrical Connectors Gently; Inspect Connectors For Corrosion Or Bent Pins.
• Support The Mirror While Removing The Mounting Bolts To Prevent Damage To The Glass Or Door Paint.
• After Mounting, Reconnect The Electrical Connector And Refit The Door Trim. Test Electric Adjustment, Folding And Heating Functions Before Finalizing The Installation.
• Aim Mirror And Verify Proper Operation At Various Ignition Positions; If The Folding Or Heater Does Not Operate, Recheck Connector Seating And Fuse/Relay Condition.

Why This Part Commonly Fails

• Impact Damage: The Most Frequent Cause Is Collisions Or Side-Impacts That Crack The Housing, Bend The Mounting, Or Damage The Folding Mechanism.
• Water Ingress: Seals And Connector Boots Can Degrade Over Time Allowing Moisture To Reach Motors, Heating Elements Or The Temperature Sensor.
• Electrical Wear: Repeated Folding And Adjustment Can Wear Gears Or Motors, Leading To Intermittent Or Failed Movement.
• Corrosion: Road Salt And Environmental Exposure Can Corrode Connectors And Fasteners, Causing Poor Electrical Contacts.
• Surface Damage: Scratches And Paint Damage Are Common From Minor Impacts; Cosmetic Damage Does Not Necessarily Affect Function.

This mirror Is Ideal For Professionals And Enthusiasts Who Need A Functional, Electrically Equipped Right-Hand Mirror For Citroën C5 Applications. Use The Product Code 8149WH / EZWD When Searching To Improve Match Accuracy And Speed Up Your Repair Process.

This complete right-side exterior mirror assembly is a direct-fit solution for many Citroën C5 applications. It combines electric adjustment, electric folding, heated glass and an integrated temperature sensor for reliable operation in varying weather conditions. The part is available in multiple colors and carries OEM reference numbers commonly used by technicians to locate compatible replacements.

Key Features

– Electric Adjustment: Precise position control of the glass for driver convenience and safety.
– Electric Folding: Motorized folding to protect the mirror in tight spaces and reduce damage risk.
– Heating Element: Rapid de-icing and demisting for improved visibility in cold conditions.
– Temperature Sensor: Supports climate-related functions and may feed vehicle systems that monitor exterior temperature.
– 12-Pin Connector (6+6): Standard multi-pin electrical connection for power, heating and sensor signals.
– Passenger Side: Right-hand mirror assembly designed for the front passenger side.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C5 (Passenger Side, Right)
• Product Codes: 96532993XT, 532993XT, 8149WH
• Other Numbers: EYLC (Color Code), 12 Pin (6+6)

Compatibility And Fitment

Designed For Citroën C5 Applications Listed In Our Categories (C5 I / C5 II). Compatibility Should Be Confirmed By Matching The Part Numbers, Connector Type (12-Pin 6+6) And Color/Trim Requirements. This Mirror Is Intended For Vehicles Equipped With Electric Folding, Heating And An External Temperature Sensor.

Installation Recommendations

– Disconnect The Battery Before Starting Work To Avoid Short Circuits And Unintended Airbag/Control Module Actions.
– Remove Interior Door Trim Carefully To Access The Mirror Mounting Bolts; Preserve Clips And Fasteners If Reusing.
– Disconnect The 12-Pin Connector And Compare Pinout And Wiring Colors To Ensure Correct Function.
– Fit The Mirror Assembly And Torque Mounting Fasteners To Manufacturer Specifications; If Torque Values Are Unknown, Follow Manufacturer Guidance Or Service Manual.
– After Installation, Verify All Functions: Mirror Adjustment, Folding, Heating And Any Sensor-Related Readouts. Use Diagnostic Tools If Needed To Check For Fault Codes.

Why This Part Fails Most Often

– Impact Damage: The Most Common Cause Is External Collision Or Snagging Which Breaks Housing Or Glass.
– Motor Wear Or Gear Damage: Repeated Folding/Unfolding Can Wear Gears Or Motors Leading To Loss Of Function.
– Water Ingress: Moisture Penetration Can Corrode Connectors Or Damage Heating Elements And Sensors.
– Electrical Faults: Broken Wires, Corroded Pins Or Connector Issues May Cause Intermittent Or Total Failure.
– Paint And Seal Degradation: Exposure To The Elements Can Affect The Finish And Seals Over Time.

Notes For Mechanics And DIY Enthusiasts

Technicians Often Search Using The OEM Part Numbers Shown Above. Check Connector Type And Function Set (Heating, Folding, Sensor) Before Ordering To Ensure Full Compatibility. Having The Correct Color Code (EYL – Grey Iceland) Helps Reduce Rework When Replacing Painted Assemblies.

The mirror assembly may show slight surface scratches on the paint, but is fully functional and ready for installation. Replacement of this mirror helps restore your vehicle’s exterior safety features and visibility, which are critical for safe lane changes and reversing maneuvers.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C5 (2005 and earlier)
• Product Codes: 8149WH
• Additional Codes: Color EFB – Ganache Paint

Installation typically involves removing the interior door panel to access the mirror mounting screws and the electrical connector for the adjustment and heater functions. Proper careful handling is recommended to avoid damage to wiring or the paint. Electric folding mirrors can wear out over time mainly due to frequent folding cycles or electrical issues, so timely replacement ensures reliable operation and improved vehicle aesthetics.

This right side electrically folding mirror is designed for Citroën C5 vehicles produced from 2005 onwards, with compatibility extending to earlier models as well. It offers electric adjustment and folding functionality, enhancing driving convenience and vehicle safety. The mirror also features heating and a temperature sensor, making it effective in quickly clearing fog or ice during cold weather conditions.

The mirror comes in a gray metallic EZRC finish (Gray Aluminium Paint), matching the body colors of many Citroën C5 cars. Installed on the passenger side, it improves both the vehicle’s aesthetics and driving visibility.

Technical Information

• Manufacturer: Citroën
• Models: C5 I, C5 II
• Product Codes: 96532993XT, 532993XT, 8149WH, EZRC
• Additional Features: Electrically controlled, folding, heated, temperature sensor

Using original product codes minimizes the risk of incorrect parts selection, ensuring perfect compatibility with your vehicle. Whether you are a professional mechanic or a DIY enthusiast, this mirror is a reliable, functional replacement part that restores your Citroën C5’s original performance and appearance.

This right electric folding side mirror is designed for Citroën C5 models from 2005 and can also be used on earlier versions. It features electric adjustment and folding mechanisms, heated glass for improved visibility in cold conditions, and a built-in temperature sensor to optimize its performance.

The mirror is positioned on the passenger side and comes in a grey metallic EYTC Orageux finish. Please note the outer painted section shows minor scratches. For compatibility assurance, provide your vehicle’s VIN number in the order notes so we can verify the part matches your car.

How To Replace The Side Mirror

To replace the side mirror, first remove the inner door panel to access the fastening screws. The mirror is secured from inside the door with screws that need to be carefully undone. Once removed, disconnect any electrical connectors before installing the new mirror.

Technical Information

• Manufacturer: PSA (Peugeot Société Anonyme)
• Model: Citroën C5 (2005 and earlier)
• Product Codes: 8149WH
• Additional Codes: EYTC (Grey Metallic Orageux)

This side mirror may experience wear over time due to exposure to weather conditions and mechanical stress, making replacement necessary to maintain safe driving and proper vehicle aesthetics.

Right electric folding exterior mirror for Citroën C5, intended for the passenger side. This unit includes the mirror shell and the internal electronics. It offers electric adjustment, electric folding, integrated heating and a temperature sensor. Mirror glass and outer cover are available separately.

Compatibility

Designed for Citroën C5 from 2005; it can also be used on certain C5 models from 2001. Always verify fitment by checking the part number 8149WH against your vehicle or the existing mirror label.

Functional Description

The assembly adjusts mirror position using an electric motor and folds electronically to reduce exposure to damage. The heating element prevents fogging and icing, while the temperature sensor supports defrost regulation. Only the mirror skeleton with onboard electronics is supplied; the reflective glass and cosmetic cover must be fitted separately.

Installation Notes

Replacement typically requires removing the interior door trim or triangle trim panel to access the mounting bolts and the electrical connector. Prior to work, disconnect the battery. Unplug the connector, remove the fasteners, fit the new unit and reconnect. After installation, check mirror adjustment, folding function and heating operation. If you are not experienced with door trim removal or electrical systems, professional installation is recommended.

Common Causes Of Failure

Typical failure causes include impact damage, water ingress and corroded connectors, worn motors or broken gear mechanisms. Electrical issues in wiring or switches can also affect operation. Actual lifespan varies according to usage, exposure to weather and road conditions.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C5
• Product Codes: 8149WH
• Additional Numbers: None Specified
• Side: Passenger

High-quality right side (passenger) exterior mirror for Citroen C5, listed with part code 8149WH and paint code EXLD (EXL Black Obsidian). This unit features electric adjustment, electric folding and an integrated heating element with a temperature sensor to improve de-icing and demisting performance. The housing shows a light paint scratch but is structurally intact and fully functional.

Key Features

• Electric mirror adjustment for precise positioning from the cabin
• Electric folding mechanism for protection in tight spaces and automated folding
• Heated mirror glass with temperature sensor to reduce fogging and ice buildup
• Painted finish: EXL – Black Obsidian (slight surface scratch)
• Passenger side (right) fitment, OEM-style replacement

Fitment And Compatibility

Primarily intended for Citroen C5 models (C5 I and C5 II series) around the 2005 model year. Fitment is often searched and verified by the product code 8149WH or paint/variant code EXLD. Before ordering, check connector type and mounting points against your vehicle to ensure exact compatibility.

Replacement Guide

1. Park the vehicle on a level surface and, as a safety precaution, isolate the electrical system if needed.
2. Remove the interior door trim panel or mirror access cover to reach the mirror mounting bolts and electrical connector.
3. Disconnect the mirror electrical connector and carefully unclip any retaining tabs.
4. Remove the mounting bolts and take off the old mirror assembly.
5. Position the replacement mirror, secure the mounting bolts, reconnect the electrical connector and reassemble the door trim.
6. Test all functions: electric adjustment, folding operation and heating (check for indicator or feel for warming after a short activation).

Common Failure Modes

• Motor failure in the mirror adjustment or folding mechanism due to wear or water ingress
• Heater element or temperature sensor malfunction causing poor demisting performance
• Damaged wiring or corroded connectors interrupting power or control signals
• Physical damage from impacts or knocks resulting in cracked glass or broken housing

Technical Information

• Manufacturer: PSA Citroen Peugeot
• Model: Citroen C5 (C5 I, C5 II) – Passenger Side / Right
• Product Codes: 8149WH, EXLD
• Additional Numbers: Paint Code EXL – Black Obsidian; Note: Slight paint scratch on housing

Part number searches (8149WH, EXLD) are a common way to locate this mirror. Suitable for professional mechanics and experienced DIYers who perform exterior mirror replacements. If in doubt, compare connector shape and mounting points or consult a parts cross-reference to confirm fitment.