This left (driver side) exterior mirror is designed for the Peugeot 307 and is commonly searched under the part code 8149AW and color code EZAC. Ideal for professional workshops and competent DIYers, the unit offers direct replacement with an electrical 5-pin connector for mirror adjustment. The neutral grey finish (EZAC) ensures a factory-look match on vehicles finished in the same paint code.

Features And Benefits

Plug-and-play replacement for a precise fit and correct function on compatible Peugeot 307 models. Electrically adjustable mechanism allows quick calibration from the driver’s seat. Robust housing and OE-style mounting points simplify installation and reduce alignment work. Frequently sought after under part number 8149AW, making it easy to find the correct unit when ordering.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 307
• Product Codes: 8149AW
• Additional Numbers: EZAC (Color Code)

Installation Recommendations

Remove the interior triangular trim or small door panel cover to access the mirror mounting nuts. Disconnect the 5-pin electrical connector before removing the mounting bolts. Install the new mirror, connect the electrical plug, lightly tighten mounting nuts, then test all mirror functions (adjustment, folding if applicable) before fully torquing the fasteners. Use non-marring trim tools to avoid damaging interior panels and ensure the door seals are correctly positioned after reassembly. Verify mirror alignment and operation on both low and high settings, and check for any wind noise after installation.

Common Causes Of Failure

Exterior mirrors most often fail due to direct impact or collision damage (parking knocks, side swipes). Electrical faults such as connector corrosion or wiring damage can prevent the adjustment motor from operating. Internal motor or gear wear over many years may cause sluggish or no movement. Freezing and subsequent forced manual adjustment can also damage the mechanism or housing.

Practical Notes

There is no fixed replacement interval; longevity depends on usage and exposure. For correct compatibility, ensure the vehicle uses a 5-pin electrical mirror and that the color code EZAC (Grey Sidobre) matches your vehicle’s finish if cosmetic match is important. Searching by part number 8149AW will speed up locating the exact replacement unit.

The left rearview mirror for Peugeot 307 is suitable as a spare part when the original mirror on the driver’s side is damaged. This is an electrically operated mirror with a 5-pin connector, intended for cars with painted rear-view mirrors in the shade of Hurricane gray (color code KTG). Thanks to the original design, it fits the given model well and preserves the appearance and function of the car’s original equipment.

Technical information:
Manufacturer: PSA Peugeot Citroën
Model: Peugeot 307 (first generation)
Side: left – driver’s side
Control: electric
Number of pins: 5 PIN
Color: KTG – Hurricane gray (painted cover)
Product codes: 8149AW, KTGA
Other numbers: PSA 8149.AW, color designation KTG

The mirror is fully functional, the glass is uncracked, the mechanics and electrical controls work correctly. The paintwork may be slightly scratched, which is normal for a used part, but this does not affect function. Thanks to the exact original part number 8149AW, it is easy to find it by catalog or pre-owned parts.

Installation recommendations:
– Before disassembling the old mirror, disconnect the battery to avoid a short circuit when handling the wiring.
– Disassemble the inner plastic cover at the mirror and carefully disconnect the original 5-pin connector.
– Check that the new part has the same number of pins and connector type and that it fits the fixing points in the door.
– Tighten the mirror evenly during installation to avoid plastic stress and vibrations while driving.
– After installation, check the function of the electric adjustment from inside the car and, if necessary, fine-tune the position of the mirror.

The part selected in this way is especially suitable for auto mechanics and home repairers who are looking for a cost-effective solution with an exact match of the original part according to codes 8149AW and KTGA.

High-quality replacement left side exterior mirror tailored for Peugeot 307 owners and professional workshops. This electrically adjustable mirror with a 5-pin connector is ideal for mechanics and DIY enthusiasts searching by part number (8149AW) or colour code (ETS / Grey Cendre). The unit is sold complete with motorised adjuster and housing; the housing may show light paint scratches but is structurally intact and fully operational.

Key Features

• Left Side Mirror for Peugeot 307 (307 I)
• Electric adjustment with 5-pin connector
• Colour: ETS – Grey Cendre
• Part Number: 8149AW
• Condition: May show minor paint scratches; no cracks; fully functional

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 307 (307 I)
• Product Codes: 8149AW
• Other Numbers: ETSC
• Electrical Connector: 5-Pin

How It Works

The mirror assembly contains an electric adjuster motor that moves the mirror glass on two axes. Controls inside the door send signals through the 5-pin connector to the motor. The housing protects the mechanism from road spray and debris, while the paint finish provides the visual match to the vehicle.

Replacement Guide (For Mechanics And Experienced DIY)

1. Remove the interior door trim or the small trim panel covering the mirror mounting screws.
2. Carefully disconnect the 5-pin electrical connector.
3. Remove the mounting nuts/bolts securing the mirror to the door (support the mirror to avoid dropping).
4. Fit the replacement mirror, secure mounting bolts to factory torque where available, and reconnect the 5-pin connector.
5. Reassemble the door trim and test mirror adjustment and any integrated heating or indicators (if applicable).

Installation Recommendations

• Use appropriate trim tools to avoid damaging door panels.
• Support the mirror during removal and installation to prevent damage to the glass or wiring.
• Check connector pins for corrosion and clean before reconnection.
• After installation, verify full range of movement and electrical functions before final reassembly.

Most Common Failure Reasons

Exterior mirrors typically fail due to direct impact (collisions or side-swipes), water ingress causing motor or connector corrosion, wear of the adjuster motor, and broken mirror glass or cracked housing from road debris. Cosmetic paint damage is common from stone chips and car park incidents but does not necessarily impair function.

Why Choose This Part

This mirror is a practical, cost-effective replacement for Peugeot 307 owners who need a functional, electrically adjustable left mirror in the ETS Grey Cendre finish. The unit is ready to fit in vehicles compatible with part code 8149AW and is appropriate for workshops and competent DIY fitters looking for a straightforward repair solution.

Description

High-quality left side mirror designed for Peugeot 307 vehicles. This electrically operated unit features a 5-pin connector and comes in KSMC Ouranos green paint. The housing may show minor paint scratches but is free of cracks and the mirror is fully functional. Ideal for professional workshops and DIY mechanics seeking a direct-fit replacement part that restores exterior mirror function and vehicle appearance.

Features And Benefits

• Direct fit for driver side of Peugeot 307 (category: 307 I where applicable).
• Electrically operated with a 5-pin connector for mirror adjustment (plug-and-play on compatible models).
• Painted in KSMC Ouranos Green for color-matched repairs.
• Robust housing and fully functional adjustment mechanism; minor cosmetic paint wear does not affect operation.
• Product code reference 8149AW for easy search and ordering.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Peugeot 307
• Product Codes: 8149AW
• Other Numbers: KSMC (Paint Code — Ouranos Green)

How To Replace

Replacement of the left side mirror is straightforward for a trained mechanic or competent DIYer. Typical steps:

• Open the door and remove the inner triangular trim or small access cover to reach the mirror mounting bolts and electrical connector.
• Disconnect the 5-pin electrical connector (ensure ignition is off to avoid accidental movement).
• Remove the mounting nuts/bolts securing the mirror to the door and carefully withdraw the mirror assembly.
• Fit the replacement mirror, align the mounting studs, secure the nuts/bolts to the manufacturer’s torque specification, and reconnect the electrical connector.
• Test mirror adjustment (and heating/folding if present) before refitting the interior trim and completing the job.

Installation Recommendations

• Work With The Ignition Off And Avoid Applying Power To The Connector During Installation.
• Check Connector Pins For Corrosion Or Bent Contacts Before Reconnection.
• Use Correct Torque For Mounting Fasteners To Prevent Vibration And Water Ingress.
• After Installation, Verify Full Range Of Motion And Adjust Calibration As Needed.
• If Mirror Has Additional Features (Heating, Folding), Verify Those Functions During Final Checks.

Why This Part Fails Most Often

• Impact Damage: Collisions and knocks are the most common cause of broken housings or detached mirrors.
• Motor Wear: Repeated use over years can cause the internal adjustment motor to wear out or seize.
• Connector Corrosion: Water ingress or damaged seals can corrode electrical contacts, causing intermittent operation.
• Paint And Cosmetic Wear: Exposure to the elements and minor impacts lead to scratches and paint loss; these are cosmetic and do not necessarily affect function.

Suitable For

Mechanics and DIY enthusiasts replacing a damaged or non-functioning left side mirror on Peugeot 307 models. Use product code 8149AW and paint code KSMC (Ouranos Green) when searching to ensure visual and functional match.

Order this left side mirror to quickly restore safe visibility and maintain the exterior appearance of your Peugeot 307. Compatible part numbers and visible color code make it easy to find the correct replacement for workshop repairs or home maintenance.

This replacement left (driver’s side) exterior mirror is designed for Peugeot 307 vehicles and is identified by product code 8149AW. The unit features electric adjustment via a 5-pin connector and comes painted in KTG Gray Hurricane. Suitable for professional garages and competent DIY mechanics, this part is a common, direct-fit replacement for damaged or non-functioning mirrors on first‑generation Peugeot 307 models.

Key Features

– Left (Driver’s) Side Exterior Mirror for Peugeot 307.
– Electric Adjustment With 5-Pin Electrical Connector.
– Painted Finish: KTG (Gray Hurricane).
– Direct Replacement Identified By Code 8149AW.

Technical Information

Manufacturer: Stellantis / Citroën / Peugeot
Model: Peugeot 307 I (First Generation)
Product Codes: 8149AW
Additional Numbers: Color Code KTG (Gray Hurricane), 5‑Pin Connector

Compatibility

Intended For Peugeot 307 (First Generation). Check That The Vehicle Uses A 5-Pin Electric Mirror Connector And That The Exterior Paint Code Or Desired Finish Matches KTG Gray Hurricane. The Mirror Is Typically Compatible With Standard Door Mirror Mounts On 307 I Body Variants.

Typical Causes Of Failure

Exterior mirrors most commonly fail due to impact damage (parking knocks, road debris), cracked or broken housing, internal motor failure for the adjustment mechanism, wiring or connector corrosion, or damage to the mirror glass. Paint And Surface Wear Are Also Frequent Issues In Older Vehicles.

Installation Recommendations

– Prepare Tools: Trim removal tools, socket set, screwdriver set, and protective gloves.
– Safety First: Disconnect The Battery Before Working On Electrical Components To Prevent Short Circuits Or Airbag/System Faults.
– Remove Interior Door Trim Or Triangular Trim Cover To Access Mirror Mounting Bolts And Electrical Connector.
– Unplug The 5-Pin Connector And Remove Fasteners Securing The Mirror To The Door.
– Fit The Replacement Mirror, Secure Fasteners To The Manufacturer’s Recommended Tightening Method, Reconnect The Electrical Connector, And Reinstall Trim.
– Test Mirror Functions (Adjustment, Heating If Present) Before Final Reassembly.

Why Replace With This Part

This mirror offers a cost-effective, painted replacement that restores vehicle appearance and electric functionality. The presence of the 5-pin connector ensures compatibility with common electric adjustment systems used on Peugeot 307 models, and the KTG Gray Hurricane finish reduces the need for additional painting steps for similarly colored vehicles.

Compatible Models: This product is specifically designed for the Peugeot 307, which is known for its reliable performance and comfort.

Replacement Frequency: Over time, mirrors may sustain damage from accidents or unfavorable weather conditions. It is advisable to check periodically for any cracks or chips that may impair visibility, as well as to replace the mirror if the electric adjustment feature fails.

Function: The left mirror serves the critical function of allowing the driver to observe vehicles or obstacles that may not be visible through the rearview mirror, ultimately enhancing road safety.

Technical Information

• Manufacturer: Peugeot
• Model: 307
• Product Codes: 8149AW
• Additional Numbers: N/A

This mirror not only enhances the look of your vehicle but serves a crucial function by providing better visibility while driving. Over time, mirrors may get damaged due to various factors such as weather conditions, accidents, or wear and tear, which could affect your safety on the road. Therefore, replacing a faulty mirror with a quality part like this one is vital.

Installation is straightforward, typically involving removing the old mirror and securing the new one in place with basic tools. It’s recommended to inspect the mirror regularly, especially after experiencing harsh driving conditions, to ensure it’s functioning optimally.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: 307
• Product Codes: 8149AW
• Other Numbers: NA

It comes in the stunning Santorini Blue color (EGJ), perfectly matching the original manufacturer’s specifications. This part is essential for maintaining the functionality and style of your vehicle.

Compatible Models: Peugeot 307. The mirror can be easily replaced by removing the old mirror from its mount and connecting the new one to the existing wiring.

Technical Information:

• Manufacturer: PSA Citroën Peugeot
• Model: Peugeot 307
• Product Codes: 8149AW
• Other Numbers: EQJB

Featuring a striking Blue Metallic finish (color code EGE – BLUE CHINE), this mirror is not only functional but also adds a stylish touch to your Peugeot 307. Please note that there is a slight scratch on the paint, as highlighted in the provided photo, which does not affect its operation.

Technical Information:

• Manufacturer: PSA Citroen Peugeot
• Model: 307
• Product Codes: 8149AW
• Other Numbers: 8149AW

This left mirror is compatible with Peugeot 307 models and is a critical component for maintaining visibility and safety while driving. Regular inspection is recommended as mirrors can be prone to wear and damage from external factors like weather, road debris, or minor accidents. Upgrade your vehicle with this essential part and enjoy improved functionality and style.