This left driver’s side exterior mirror is a direct-fit replacement for Peugeot 206 models and is listed under common part numbers used by workshops and parts lookups. The unit arrives in Thorium Grey (KTH) paint and may show light surface blemishes as shown in the pictures. Ideal for professional mechanics and DIY enthusiasts who search by part number such as 96323811XT, 96432630XT or 8148YC when sourcing an exact match.

Technical Information

• Manufacturer: Peugeot (Stellantis)
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96323811XT, 96432630XT, 8148YC, 8148.YC
• Other Numbers: KTH (Paint Code – Thorium Grey)

Compatibility

Fits Driver Side For Peugeot 206 Range Including 206+. Confirm Fitment By Matching Part Numbers Listed Above. Designed As Exterior Mirror Assembly For Left-Hand Drive Vehicles Where Applicable.

Function And Description

Exterior Mirror Assembly For The Driver Side Provides Rearward Visibility And Houses The Mirror Glass, Adjustment Mechanism And Mounting Bracket. Depending On Vehicle Specification, The Assembly May Accommodate Manual Or Electric Adjustment Hardware And Wiring. This Unit Is Supplied Painted In Thorium Grey (KTH) And Shows Minor Surface Scratches.

Replacement Procedure

• Prepare Vehicle: Park On Level Ground And Disconnect Battery Before Working On Electrical Connectors.
• Remove Interior Door Trim Or Access Panel To Reach Mirror Mounting Nuts And Electrical Plug.
• Disconnect Electrical Connector And Remove Mounting Nuts/ Bolts Holding The Mirror Assembly.
• Remove Old Mirror And Compare Mounting Points And Connectors With New Unit.
• Fit New Mirror, Secure Mounting Nuts To Manufacturer’s Torque Specifications, Reconnect Electrical Connector And Reinstall Interior Trim.
• Test Mirror Adjustment And Any Heating Or Folding Functions Before Completing Job.

Common Failure Causes

• Impact Damage From Minor Collisions Or Door Swipes Causing Broken Housing Or Glass.
• Wear Of Adjustment Motor Or Mechanical Linkages Leading To Loss Of Adjustment.
• Corrosion Of Mounting Points Or Electrical Contacts Causing Intermittent Function.
• Water Ingress Or Wiring Damage From Door Seal Failures.

Installation Recommendations

Installation Is Straightforward For Experienced Technicians: Ensure Correct Alignment And Secure Fastening To Prevent Wind Noise Or Vibration. Match Paint Code KTH If Cosmetic Appearance Is Important. Replace Any Damaged Clips Or Seals During Installation To Maintain Water Tightness. When Reconnecting Electrical Connectors, Ensure Clean Contacts And Proper Routing To Avoid Pinch Points.

Why This Part Is Often Replaced

Exterior Mirrors Are Frequently Replaced Due To Everyday Impacts, Parking Incidents And Mechanical Wear Of Adjustment Mechanisms. Cosmetic Damage Such As Scratches Or Scuffs Also Drives Replacement When Visual Condition Matters.

High-quality left (driver’s side) exterior mirror compatible with Peugeot 206 series. Ideal for professional workshops and DIY mechanics looking for a direct-fit replacement by product code. The housing is painted in EYL (Iceland Grey) but other paint options are available from stock; unit is supplied ready to fit the vehicle body and restore original appearance and function.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96432630XT, 96323811XT, 8148YC, EYLC
• Additional Numbers: 8148.YC

Function

The mirror provides the driver with lateral and rearward visibility. Depending on the vehicle specification, the mirror housing can be painted to match the body colour. This replacement restores exterior appearance and sight-lines; electric adjustment or heating functions will be retained only if the unit corresponds to the original equipment specification for that vehicle.

Replacement Procedure

Typical replacement steps (general guidance): remove the small interior triangular trim or inner door panel to access the mirror mounting points, disconnect the electrical connector if the mirror is powered or heated, remove the retaining nuts/bolts, remove the old mirror and fit the new unit, reconnect the electrical connector and test all functions (adjustment, heating) before reassembling the door trim. Follow the vehicle manufacturer’s service manual for exact disassembly order, torque settings and trim removal to avoid damage.

Installation Recommendations

• Disconnect the battery before working on electrical connections to reduce the risk of short circuits or damage.
• Inspect wiring and connector terminals for corrosion or damage; replace or clean as necessary.
• When fitting, ensure correct alignment of the mirror glass and tighten fasteners to the manufacturer’s specification.
• After installation, verify mirror adjustment range and heating (if applicable) and check for wind noise at driving speeds.
• If unsure, have the replacement performed by a qualified technician with appropriate tools.

Most Common Failure Causes

Exterior mirrors on passenger vehicles most often fail due to impact damage (parking knocks, collisions), breakage of the mirror glass, water ingress causing motor or connector corrosion, and wear of the internal adjustment motor or mechanism. Painted housings can suffer scratches or paint chipping from road debris and repeated contact.

Why Choose This Part

Searching by product code is common among mechanics and DIYers — this listing includes the primary OEM codes (96432630XT, 96323811XT, 8148YC) to help you find the correct replacement quickly. The part is offered in the OE paint code EYL (Iceland Grey) and is supplied as a direct-fit unit suitable for Peugeot 206 models, enabling a fast and reliable repair.

Direct replacement left exterior mirror assembly designed for Peugeot 206 series. This unit restores the original appearance of the driver’s side and is ideal for professional workshops and DIY mechanics who need a reliable, ready-to-fit spare part. Frequently searched by part numbers, the mirror matches OE references and comes painted in EZRC (Aluminum Grey) but is also available in other colors from stock.

Benefits

– Direct fit for quick replacement, saving time in the workshop.
– Painted finish reduces preparation work and ensures consistent color match.
– Suitable for routine collision repairs and panel replacement jobs.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96432630XT, 96323811XT, 8148YC
• Additional Numbers: EZRC

Installation

Replacement is straightforward for technicians familiar with door trim removal. Typical steps:

• Remove the inner door trim and the triangular sail cover to access the mirror mounting area.
• Disconnect any electrical connectors (adjustment motor/heating) before loosening the mounting nuts.
• Unscrew the mirror fixing nuts from the door and carefully remove the old unit.
• Fit the new mirror, align the mounting studs, tighten the nuts to the manufacturer’s recommended torque, reconnect electrical connectors and test all functions.
• Reinstall the door trim and verify mirror adjustment and heating (if fitted).

Installation Recommendations

– Use proper trim tools to avoid damaging clips and panels.
– If the unit has electrical functions, disconnect the battery before working to prevent short circuits and then test functions after reconnection.
– Check gasket/seal condition and replace if necessary to avoid water ingress.

Common Failure Causes

• Impact Damage: Collisions or knocks are the most frequent causes—broken housings or cracked glass.
• Water Ingress: Moisture can corrode connectors or cause motor failure on electrically adjustable mirrors.
• Wear And Loosened Fixings: Vibration and long-term use can loosen mounting points or wear the adjustment mechanism.
• Paint And Surface Damage: Scratches and chips from road debris or minor impacts.

Part numbers shown are commonly used when searching for this component. Ensure you select the left/driver side mirror and the correct finish code (EZRC) for an accurate match. This product is aimed at professional mechanics and skilled DIYers performing bodywork or mirror replacement on Peugeot 206 models.

Product Overview

High-quality replacement left (driver-side) exterior mirror designed for Peugeot 206. This unit is a direct-fit option for quick replacement and is commonly searched by part numbers 96429956XT and 8148YC. The mirror housing is supplied in black; alternative painted versions are available from stock. Ideal for professional workshops and experienced DIY enthusiasts who need a reliable, roadworthy replacement after impact or wear.

Key Benefits

• Direct Replacement: Designed to match original mounting points for straightforward installation.
• Stock Availability: Black color commonly stocked; additional colors available to match vehicle trim.
• Search-Friendly Codes: Frequently located using OEM/Product codes (96429956XT, 8148YC, 8148.YC).
• Durable Construction: Robust plastic housing and secure fixing points for long service life under normal use.

How It Works And When It Fails

The exterior mirror provides driver visibility of the left lane and rear quarters, reducing blind spots and supporting safe lane changes. Common failure modes include impact damage (collisions, door knocks), cracked or shattered glass, motor or actuator failure in electrically adjustable units, corrosion or wiring faults affecting heating or folding functions, and broken mounting tabs from repeated stress or minor collisions. Mechanical wear to the adjustment mechanism and degraded seals allowing water ingress are frequent causes of malfunction.

Replacement Procedure

Typical replacement steps for a mechanic or competent DIYer:

1. Remove Interior Door Trim Panel To Access Mirror Fasteners And Electrical Connector.
2. If Applicable, Carefully Disconnect Mirror Electrical Connector (Power Adjustment, Heating, Folding).
3. Remove Mounting Nuts/Screws And Detach Old Mirror Assembly From Door.
4. Fit New Mirror Assembly, Secure Fasteners To Manufacturer Torque Where Available, And Reconnect Electrical Connector.
5. Refit Door Trim Panel, Test All Mirror Functions (Adjustment, Heating, Folding) And Adjust Mirror Glass For Correct Field Of View.

Note: If The Mirror Includes Electrical Functions, It Is Recommended To Disconnect The Battery Before Working On The Electrical System To Prevent Short Circuits Or Unintended Airbag Deployment In Vehicles Where Door Trim Removal Affects SRS Components.

Technical Information

• Manufacturer: Stellantis (Peugeot/Citroën)
• Model: Peugeot 206
• Product Codes: 96429956XT, 8148YC, 8148.YC
• Other Numbers: 8148.YC | 8148YC | 96429956XT

Installation Recommendations

Ensure Door Trim Removal Is Performed Carefully To Avoid Damaging Clips Or SRS Components. Use Appropriate Tools And A Suitable Torque Wrench For Mounting Fasteners. For Mirrors With Electrical Functions (Heated Or Power-Folding), Confirm Connector Pins Are Clean And Secure; Apply Dielectric Grease If Necessary To Prevent Corrosion. If Painting The Housing To Match Body Color, Mask Electrical Connectors And Mirror Glass Properly Before Spray Painting.

Why This Part Is Most Commonly Replaced

Exterior mirrors are most often replaced due to accidental impact (parking lot knocks, side collisions), vandalism, or progressive failure of internal actuators and heating elements. Weather exposure and water ingress can accelerate corrosion of contacts and motors, while repeated mechanical stress can break mounting tabs and hinge components.

Who Should Fit This Part

Suitable For Experienced DIYers And Professional Automechanics. Professional Fitting Recommended For Vehicles With Integrated Electrical Features Or Where Door Trim Removal Involves Airbag/Restraint Systems.

Search Tips

Customers Often Find This Part By Searching Product Codes: 96429956XT, 8148YC, Or By Vehicle Model: Peugeot 206. Including These Codes In Your Search Will Improve The Likelihood Of A Quick Match.