Quality used passenger-side sun visor designed for Citroën C8 and Peugeot 807 vehicles. The visor includes an integrated vanity mirror and is a direct-fit replacement for the factory part, restoring sun glare protection and interior functionality. As a used component, minor cosmetic soiling or light surface wear may be present, but the visor remains fully functional for everyday use.

The visor’s primary purpose is to shield the driver or passenger from direct sunlight and reduce glare while driving. The integrated vanity mirror provides practical convenience for vehicle occupants. The unit mounts to the roof rail with a pivot and retaining screws, allowing it to fold up out of the way when not in use.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C8; Peugeot 807
• Product Codes: 8143SW; 8143.SW
• Other Numbers: NFP

Installation Recommendations

• Fold the visor down and locate the plastic caps or covers that conceal the mounting screws.
• Carefully pry off the screw covers with a trim tool to avoid damaging the headliner.
• Remove the retaining screws and lower the visor assembly. If an electrical connector is present (for an illuminated mirror), unplug it before fully removing the visor.
• Install the replacement visor by reversing the removal steps: reconnect any electrical connector, position the pivot and secure the screws, then refit the plastic covers. Check that the visor pivots smoothly and locks into the stowed position securely.
• Use moderate torque on fasteners to avoid stripping threads in the roof rail. Inspect surrounding trim and clips during installation and replace any damaged fasteners.

Common Failure Reasons

• Mechanical Wear: Pivot pins and internal springs can wear or loosen over time, causing the visor to sag or fail to hold position.
• Broken Mounting Clips/Screws: Repeated use or impact can damage the mounting points, leading to play or detachment.
• Upholstery Damage and Soiling: Fabric or vinyl covering may become stained, worn or detached from the core, especially on frequently used visors.
• Mirror Wear: The vanity mirror can become scratched, cracked or come loose from its housing.

Choosing this used passenger-side sun visor is a practical and cost-effective way to restore interior function and comfort in Citroën C8 and Peugeot 807 models. Always inspect the part on delivery for fit and condition, and follow safe workshop practices during installation.

Practical replacement sun visor designed for Citroën C8 and Peugeot 807 models. The visor includes a vanity mirror and provides reliable sun glare protection for the driver side. Supplied as a used unit with possible light soiling typical for salvaged interior parts. Often searched and identified by part numbers such as 8143SW or 8143.SW, this item is a direct-fit option for workshops and DIY enthusiasts looking to restore interior function and comfort.

Technical Information

• Manufacturer: Citroën / Peugeot (Stellantis)
• Model: Citroën C8, Peugeot 807
• Product Codes: 8143SW, 8143.SW, 8143SW/8143.SW
• Additional Numbers: NFP
• Side: Left (Driver)
• Condition: Used (possible minor soiling)

Function And Benefits

The sun visor protects the driver from direct sunlight and glare, improves driving comfort and visibility, and includes an integrated vanity mirror for convenience. Replacing a worn or damaged visor restores interior appearance and ensures proper shading at low sun angles. This part is suitable for professional workshops as well as competent DIYers performing interior repairs.

Installation Recommendations

• Fold the visor down and locate the mounting cover or trim cap; gently pry off any plastic cap with a trim tool or small flat screwdriver.
• Support the visor while removing the mounting screws (typically accessible at the pivot bracket). Fasteners on Citroën/Peugeot interiors are commonly Phillips or Torx; have both types available.
• If the visor has an electrical connector for an illuminated mirror, disconnect it before full removal. Note: This item may or may not include lighting—verify visually during removal.
• Remove the old visor from the mounting rod and fit the replacement by sliding it onto the stud and securing the bracket with the original screws. Reconnect any electrical connector and test mirror illumination if present.
• Check and, if needed, replace broken clips or trim caps for a secure fit. Clean minor soiling with a suitable interior cleaner before installation.

Why This Part Most Commonly Fails

• Plastic pivot or bracket breakage from repeated movement or impact.
• Fabric delamination or foam deterioration due to prolonged sun exposure and temperature cycles.
• Vanity mirror becoming detached or scratched through normal use.
• Broken mounting clips or stripped screw threads from prior repairs.
• If equipped, illuminated mirror faults caused by wiring wear or bulb/LED failure.

Expected service life varies with use and environment; sun visors often show wear after many years (commonly 8–15 years depending on exposure and handling). Searching by part number (8143SW / 8143.SW) usually yields the correct replacement for Citroën C8 and Peugeot 807 applications.