This compact tool kit supplies everything a mechanic or a DIY enthusiast needs for roadside wheel changes and basic recovery tasks on the Peugeot 307 CC. The set contains a vehicle jack, a wheel (lug) wrench, a lever/handle for operating the jack and a screw‑in towing eye — all items commonly used during tyre replacement and vehicle recovery. These parts are frequently looked up by their product codes, so the kit is ideal for workshops, mobile mechanics and owners who keep original equipment tools in their boot.

Key Benefits

• Complete set for safe wheel changes and light towing: jack, wheel wrench, jack handle and towing eye.
• OEM‑style fitment for Peugeot 307 CC — designed to stow in the factory storage location in the boot.
• Compact and lightweight for easy storage and quick access during emergencies.
• Part numbers included for fast searchability and correct fit identification.

Usage And Installation

Before lifting the vehicle, park on level ground, apply the handbrake and chock the opposite wheel. Loosen the wheel nuts slightly while the wheel is still on the ground. Position the jack under the vehicle manufacturer’s recommended jacking point (refer to the vehicle handbook for exact locations) and raise the car until the tyre is clear of the ground. Remove the wheel nuts with the wheel wrench, change the wheel and tighten the nuts by hand before lowering. Final torque should be applied with a torque wrench to the manufacturer’s specification after the vehicle is lowered. Screw the towing eye into the designated threaded socket (usually located behind a removable cover in the front or rear bumper) until fully seated before attaching towing equipment.

Why Parts Fail Or Go Missing

These tools are subject to corrosion and wear from exposure to moisture, road salt and dirt when stored in the boot. Common reasons for replacement are seized or bent jack components, stripped threads on towing eyes, broken handles or missing items after roadside use. Incorrect storage or using the jack on uneven ground can damage the mechanism. Regular visual checks and lubrication of moving parts extend service life.

Recommendations For Fitment And Use

• Verify the kit stows correctly in the 307 CC boot compartment and the towing eye matches the bumper socket thread pitch.
• Always use the jack only at the manufacturer’s jacking points and never work under a car supported solely by a jack — use axle stands for safety.
• Inspect tools for corrosion, thread damage and smooth operation periodically; replace any damaged components before use.
• Keep wheel nuts at correct torque after 50–100 km following a wheel change to ensure safe seating.

Technical Information

• Manufacturer: Stellantis / Peugeot / Citroën
• Model: Peugeot 307 CC
• Product Codes: 673686, 674414, 671739
• Other Numbers: 6701709

Additional Notes

This kit is primarily intended for Peugeot 307 CC owners and professionals servicing this model. Because the set is commonly searched by numeric codes, listing these numbers prominently helps with part identification and online searchability. Keep the tools clean and dry and store them in their original compartment to reduce corrosion and prevent loss.

Overview

Complete roadside tool kit tailored for Peugeot 407 drivers and professional technicians. The set contains a scissor jack for lifting the vehicle, a wheel wrench for loosening and tightening wheel nuts, and a threaded towing eye for emergency recovery or transport. Ideal for changing a flat tyre on vehicles equipped with up to 16-inch wheels and for short towing operations when the recovery point is required.

Key Features

• Scissor Jack Designed For Passenger Cars: Compact storage, mechanical lift suitable for routine wheel changes.
• Wheel Wrench With Standard Socket End: Provides leverage to remove and refit wheel nuts safely.
• Threaded Towing Eye: Screws into the designated tow point on the front or rear bumper for secure towing.
• Part Numbers For Easy Search: 672599, 6736C1, 674414 – Commonly Used In Parts Lists And Service Catalogues.
• Compact Case-Friendly Design: Fits into the trunk luggage compartment or dedicated underfloor storage on compatible vehicles.

How To Use / Replace

• Prepare Vehicle: Park on a level surface, engage parking brake, and chock opposing wheels.
• Loosen Wheel Nuts: Slightly loosen nuts with the wheel wrench before lifting the car.
• Position Jack: Place jack under the factory jacking point (rocker sill or designated lift point) and raise vehicle until wheel clears the ground.
• Remove Wheel And Fit Spare: Fully remove nuts, change wheel, hand-tighten nuts, lower vehicle and torque nuts to manufacturer specification.
• Install Towing Eye: Screw towing eye fully into the threaded recovery point until seated; follow towing or recovery procedure for safe pull or transport.
• Safety Note: Never work under a vehicle supported only by the jack. Use axle stands or place the vehicle on solid supports before performing underbody work.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 407 (Vehicles With Up To 16-Inch Wheels)
• Product Codes: 672599, 6736C1, 674414
• Other Numbers: 672599 | 6736C1 | 674414 (Used As Search Tags In Parts Catalogues)

Installation Recommendations

Store the kit in the original location in the trunk to prevent rattling and corrosion. Before use, inspect the jack screw, pivot points, and wheel wrench for rust or damage; lubricate moving threads as needed. When jacking the vehicle, always use the manufacturer-designated jacking points to avoid body or suspension damage. Tighten wheel nuts in a star pattern and torque to the vehicle manufacturer’s specification after lowering.

Why The Part Most Commonly Fails

Tool kits rarely suffer from mechanical failure but commonly become unusable because of corrosion, seized threads, bent or distorted jack members after improper use, or missing components (often removed or lost after roadside repairs). The towing eye can suffer thread damage from cross-threading or impact. Regular inspection and proper storage prevent most issues.

Who Should Use This Kit

Designed for Automechanics, Garage Technicians, And Do-It-Yourself Car Owners Who Service Peugeot 407 Vehicles. Useful As A Factory-Style Replacement Or As A Practical Emergency Kit For Roadside Repairs.

Notes For Buyers

Search Keywords: Peugeot 407 Jack Kit, 672599, 6736C1, 674414, Towing Eye, Wheel Wrench, 16-Inch Wheel Jack. Fits Peugeot 407 Models Equipped With 16-Inch Wheels; Verify That Your Vehicle Uses A Similar Underfloor Kit Layout Before Installation.

This Citroën / Peugeot original tool kit includes a jack, wheel wrench and towing eye. This is a practical and compact equipment intended for Citroën C5 II cars and selected Peugeot models, where it is used to safely lift the vehicle when changing a wheel and for use when towing.

The complete set is ideal for car mechanics and DIYers who want to have functional and dimensionally correct tools in the trunk of their car. The original PSA parts used ensure the correct mounting geometry, adequate load capacity and trouble-free storage in the original foam or plastic organizer in the luggage compartment.

Technical information:
Manufacturer: PSA Citroën Peugeot
Model: Citroën C5 II (approx. 2005-2007, for cars with wheels up to 16″)
Product codes: 672599, 6736C1, 674414
Other numbers: may vary depending on the specific equipment and year of manufacture, but the part is intended for the C5 II model series and related Peugeot platforms (e.g. 407)

Set Contents:
– Hever (car jack) for emergency lifting of the vehicle when changing a wheel
– Wheel wrench, suitable for original PSA disc bolts
– Towing eye for screwing into the front or rear thread of the body intended for towing

Advantages:
– Original dimensions and correct storage in the trunk
– Corresponding load capacity and construction for the given type of car
– A practical complete kit for changing a wheel and emergency towing

Recommendations for assembly and use:
– Before using the lever, always secure the vehicle against movement (handbrake, gear, or support the wheels).
– Place the jack only in the lifting points marked by the manufacturer on the threshold parts of the body to prevent damage to the car.
– Lift the vehicle only on a flat and firm surface, never on soft or unstable ground.
– Use the wheel wrench with adequate force, after changing the wheel it is advisable to tighten the screws with a torque wrench to the prescribed tightening torque.
– Always screw the towing eye firmly into the specified thread up to the stop and use only in accordance with the vehicle manufacturer’s recommendations (shorter movements, emergency towing).
– Before a long journey, it is advisable to check whether the set is complete and stored in its place in the luggage compartment.

Finding high-quality and reliable replacement parts for Citroën and Peugeot vehicles can be challenging, but this tool set delivers the quality and durability needed for maintaining or repairing your car. The set covers common tasks such as wheel replacement and vehicle recovery, tailored precisely to the specifications of the Citroën C3 first generation.

Technical Information:

Manufacturer: PSA Citroën Peugeot
Model: Citroën C3, First Generation
Product Codes: 673672 6725A1 674414 671739

The jack included in this set is sturdy and secure, offering easy and safe lifting for tire changes. The wheel wrench is engineered to fit the lug nuts and bolts of the Citroën C3 wheels, ensuring quick and efficient loosening or tightening. Additionally, the tow eye is an indispensable accessory for vehicle towing scenarios.

This tool set is perfect for professional auto mechanics and DIY car enthusiasts who need a dependable and efficient solution for the routine maintenance of Citroën vehicles. Invest in this essential kit to simplify your work and keep your Citroën C3 in optimal technical condition.