Overview

Complete roadside tool kit tailored for Peugeot 407 drivers and professional technicians. The set contains a scissor jack for lifting the vehicle, a wheel wrench for loosening and tightening wheel nuts, and a threaded towing eye for emergency recovery or transport. Ideal for changing a flat tyre on vehicles equipped with up to 16-inch wheels and for short towing operations when the recovery point is required.

Key Features

• Scissor Jack Designed For Passenger Cars: Compact storage, mechanical lift suitable for routine wheel changes.
• Wheel Wrench With Standard Socket End: Provides leverage to remove and refit wheel nuts safely.
• Threaded Towing Eye: Screws into the designated tow point on the front or rear bumper for secure towing.
• Part Numbers For Easy Search: 672599, 6736C1, 674414 – Commonly Used In Parts Lists And Service Catalogues.
• Compact Case-Friendly Design: Fits into the trunk luggage compartment or dedicated underfloor storage on compatible vehicles.

How To Use / Replace

• Prepare Vehicle: Park on a level surface, engage parking brake, and chock opposing wheels.
• Loosen Wheel Nuts: Slightly loosen nuts with the wheel wrench before lifting the car.
• Position Jack: Place jack under the factory jacking point (rocker sill or designated lift point) and raise vehicle until wheel clears the ground.
• Remove Wheel And Fit Spare: Fully remove nuts, change wheel, hand-tighten nuts, lower vehicle and torque nuts to manufacturer specification.
• Install Towing Eye: Screw towing eye fully into the threaded recovery point until seated; follow towing or recovery procedure for safe pull or transport.
• Safety Note: Never work under a vehicle supported only by the jack. Use axle stands or place the vehicle on solid supports before performing underbody work.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 407 (Vehicles With Up To 16-Inch Wheels)
• Product Codes: 672599, 6736C1, 674414
• Other Numbers: 672599 | 6736C1 | 674414 (Used As Search Tags In Parts Catalogues)

Installation Recommendations

Store the kit in the original location in the trunk to prevent rattling and corrosion. Before use, inspect the jack screw, pivot points, and wheel wrench for rust or damage; lubricate moving threads as needed. When jacking the vehicle, always use the manufacturer-designated jacking points to avoid body or suspension damage. Tighten wheel nuts in a star pattern and torque to the vehicle manufacturer’s specification after lowering.

Why The Part Most Commonly Fails

Tool kits rarely suffer from mechanical failure but commonly become unusable because of corrosion, seized threads, bent or distorted jack members after improper use, or missing components (often removed or lost after roadside repairs). The towing eye can suffer thread damage from cross-threading or impact. Regular inspection and proper storage prevent most issues.

Who Should Use This Kit

Designed for Automechanics, Garage Technicians, And Do-It-Yourself Car Owners Who Service Peugeot 407 Vehicles. Useful As A Factory-Style Replacement Or As A Practical Emergency Kit For Roadside Repairs.

Notes For Buyers

Search Keywords: Peugeot 407 Jack Kit, 672599, 6736C1, 674414, Towing Eye, Wheel Wrench, 16-Inch Wheel Jack. Fits Peugeot 407 Models Equipped With 16-Inch Wheels; Verify That Your Vehicle Uses A Similar Underfloor Kit Layout Before Installation.

This Citroën / Peugeot original tool kit includes a jack, wheel wrench and towing eye. This is a practical and compact equipment intended for Citroën C5 II cars and selected Peugeot models, where it is used to safely lift the vehicle when changing a wheel and for use when towing.

The complete set is ideal for car mechanics and DIYers who want to have functional and dimensionally correct tools in the trunk of their car. The original PSA parts used ensure the correct mounting geometry, adequate load capacity and trouble-free storage in the original foam or plastic organizer in the luggage compartment.

Technical information:
Manufacturer: PSA Citroën Peugeot
Model: Citroën C5 II (approx. 2005-2007, for cars with wheels up to 16″)
Product codes: 672599, 6736C1, 674414
Other numbers: may vary depending on the specific equipment and year of manufacture, but the part is intended for the C5 II model series and related Peugeot platforms (e.g. 407)

Set Contents:
– Hever (car jack) for emergency lifting of the vehicle when changing a wheel
– Wheel wrench, suitable for original PSA disc bolts
– Towing eye for screwing into the front or rear thread of the body intended for towing

Advantages:
– Original dimensions and correct storage in the trunk
– Corresponding load capacity and construction for the given type of car
– A practical complete kit for changing a wheel and emergency towing

Recommendations for assembly and use:
– Before using the lever, always secure the vehicle against movement (handbrake, gear, or support the wheels).
– Place the jack only in the lifting points marked by the manufacturer on the threshold parts of the body to prevent damage to the car.
– Lift the vehicle only on a flat and firm surface, never on soft or unstable ground.
– Use the wheel wrench with adequate force, after changing the wheel it is advisable to tighten the screws with a torque wrench to the prescribed tightening torque.
– Always screw the towing eye firmly into the specified thread up to the stop and use only in accordance with the vehicle manufacturer’s recommendations (shorter movements, emergency towing).
– Before a long journey, it is advisable to check whether the set is complete and stored in its place in the luggage compartment.