This compact tool kit supplies everything a mechanic or a DIY enthusiast needs for roadside wheel changes and basic recovery tasks on the Peugeot 307 CC. The set contains a vehicle jack, a wheel (lug) wrench, a lever/handle for operating the jack and a screw‑in towing eye — all items commonly used during tyre replacement and vehicle recovery. These parts are frequently looked up by their product codes, so the kit is ideal for workshops, mobile mechanics and owners who keep original equipment tools in their boot.

Key Benefits

• Complete set for safe wheel changes and light towing: jack, wheel wrench, jack handle and towing eye.
• OEM‑style fitment for Peugeot 307 CC — designed to stow in the factory storage location in the boot.
• Compact and lightweight for easy storage and quick access during emergencies.
• Part numbers included for fast searchability and correct fit identification.

Usage And Installation

Before lifting the vehicle, park on level ground, apply the handbrake and chock the opposite wheel. Loosen the wheel nuts slightly while the wheel is still on the ground. Position the jack under the vehicle manufacturer’s recommended jacking point (refer to the vehicle handbook for exact locations) and raise the car until the tyre is clear of the ground. Remove the wheel nuts with the wheel wrench, change the wheel and tighten the nuts by hand before lowering. Final torque should be applied with a torque wrench to the manufacturer’s specification after the vehicle is lowered. Screw the towing eye into the designated threaded socket (usually located behind a removable cover in the front or rear bumper) until fully seated before attaching towing equipment.

Why Parts Fail Or Go Missing

These tools are subject to corrosion and wear from exposure to moisture, road salt and dirt when stored in the boot. Common reasons for replacement are seized or bent jack components, stripped threads on towing eyes, broken handles or missing items after roadside use. Incorrect storage or using the jack on uneven ground can damage the mechanism. Regular visual checks and lubrication of moving parts extend service life.

Recommendations For Fitment And Use

• Verify the kit stows correctly in the 307 CC boot compartment and the towing eye matches the bumper socket thread pitch.
• Always use the jack only at the manufacturer’s jacking points and never work under a car supported solely by a jack — use axle stands for safety.
• Inspect tools for corrosion, thread damage and smooth operation periodically; replace any damaged components before use.
• Keep wheel nuts at correct torque after 50–100 km following a wheel change to ensure safe seating.

Technical Information

• Manufacturer: Stellantis / Peugeot / Citroën
• Model: Peugeot 307 CC
• Product Codes: 673686, 674414, 671739
• Other Numbers: 6701709

Additional Notes

This kit is primarily intended for Peugeot 307 CC owners and professionals servicing this model. Because the set is commonly searched by numeric codes, listing these numbers prominently helps with part identification and online searchability. Keep the tools clean and dry and store them in their original compartment to reduce corrosion and prevent loss.

This compact emergency tool set is an essential accessory for professional mechanics and DIY enthusiasts working on Citroën and Peugeot models. The kit is designed for convenient storage in the vehicle body holder and contains the basic equipment needed for wheel changes and roadside towing: a compact jack (typically scissor type), a sturdy wheel wrench for loosening and tightening lug nuts, a threaded towing eye and a mounting bracket that secures the tools inside the trunk. Many customers search by product codes, so this item is commonly listed under 673695, 672594 and 671739 — include these codes when searching to find the correct replacement quickly.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot OEM)
• Model: Citroën C3 Picasso; Citroën C4; Citroën C4 II (B7); Peugeot 207; Peugeot 301; Peugeot 308; Peugeot 3008
• Product Codes: 673695, 672594, 671739
• Other Numbers: 671739 | 672594 | 673695

How To Use And Install

Using the kit: Before lifting the vehicle, park on a firm, level surface, apply the parking brake and place wheel chocks on the opposite wheel. Loosen wheel nuts slightly while the car is still on the ground. Position the jack under the vehicle’s designated jacking point (refer to the vehicle owner’s manual for exact locations), then raise the car until the wheel is off the ground. Remove the wheel nuts and wheel, perform the repair or replacement, refit the wheel, tighten nuts by hand, lower the vehicle and torque nuts to the correct specification.

Attaching the towing eye: The towing eye screws into a threaded receptacle located behind a removable cover in the front or rear bumper. Screw the towing eye fully by hand until it seats securely before attaching a tow hook or strap.

Fitting the holder: The tool holder clips or bolts into a dedicated location in the boot/trunk lining. Align the bracket with the vehicle mounting points and press or fasten until it locks. Ensure the kit is secured to prevent movement during driving.

Installation Recommendations

• Always consult the vehicle owner’s manual for jacking points and torque values.
• Loosen wheel nuts slightly before raising the vehicle and never place any part of your body under the car supported only by the jack.
• Use wheel chocks and apply the parking brake; if possible, work on a flat, level surface.
• Check towing eye threads before use; if threads are damaged, do not use for towing.
• After use, clean and dry the tools and return them to the holder to prevent corrosion and rattling noises.

Most Common Failure Reasons

Tool kits of this type rarely “fail” mechanically but problems are common due to wear, corrosion, misuse or loss. Typical issues include:

• Corrosion Of Jack Screw Or Wrench: Prolonged exposure to moisture or road salt can seize screw mechanisms and corrode metal components.
• Stripped Towing Eye Threads: Cross-threading or forcing a damaged towing eye can ruin the thread in the bumper receptacle.
• Damaged Or Bent Wrench/Jack: Misuse, overloading or improper positioning of the jack can bend components and reduce safety.
• Missing Parts Or Loose Holder: Tools can be lost or the mounting bracket can break, leaving the kit unsecured in the trunk.

Maintenance Tips

• Inspect the kit periodically for corrosion, thread damage and secure mounting.
• Lubricate the jack screw with light grease to keep the mechanism operating smoothly.
• Store the kit dry and secured in the holder to avoid rattles and moisture buildup.
• Replace any damaged components promptly to maintain safe roadside equipment.

Keywords for search and compatibility: Citroën C3 Picasso tool kit, Citroën C4 jack kit, Citroën C4 II B7 tools, Peugeot 207 towing eye, Peugeot 308 jack, product codes 673695 672594 671739.

Overview

OEM Style Tool Set Designed For Stellantis Passenger Cars. This compact roadside kit contains a scissor jack, wheel brace (lug wrench), towing eye and a body-mounted holder for secure storage. Ideal For Professional Mechanics And DIY Enthusiasts, The Set Is Intended For Emergency Wheel Changes, Temporary Towing Hook-Up And On-Board Storage In The Luggage Compartment.

Benefits And Use Cases

• Fast Identification By Part Number: Commonly Searched As 673695, 672594, 671739 — useful For Online Searches And Spare-Part Orders.
• Compact And Secure Storage: Holder Bracket Keeps Tools Fixed To Bodywork Or Luggage Area To Prevent Rattle And Damage.
• Essential For Roadside Repairs: Enables Safe Jacking And Wheel Removal When Used Correctly With Vehicle Jack Points.
• Compatibility With Multiple Models Means A Single Item Covers Several Citroën/Peugeot Variants — Practical For Workshops.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C3 II; Citroën C3 Picasso; Citroën C4; Citroën C4 II (B7); DS3; DS4; Peugeot 207; Peugeot 301; Peugeot 308; Peugeot 3008 (I)
• Product Codes: 673695, 672594, 671739
• Other Numbers: 671739 | 672594 | 673695

How To Use And Replace

Using The Jack And Tools: Park On A Level Surface, Apply The Handbrake And Chock The Opposite Wheels. Locate The Manufacturer-Approved Jack Point (Refer To Vehicle Manual). Position The Jack Under The Jack Point, Raise The Vehicle Slowly Until The Wheel Is Off The Ground, And Use The Wheel Wrench To Remove The Wheel Nuts In A Cross Pattern. When Finished, Lower The Vehicle Carefully.

Fitting And Replacement: The Set Typically Sits In The Factory Storage Location In The Luggage Compartment (Under The Floor Panel) And Is Retained By A Dedicated Bracket Or Clips. To Replace, Remove The Old Kit From The Holder, Place The New Set Into The Original Mounting Position And Secure The Holder. No Special Tools Are Usually Required Beyond The Kit Itself.

Installation Recommendations

• Always Use Correct Jack Points Specified By The Vehicle Manufacturer To Avoid Body Damage.
• Work On A Stable, Level Surface And Use Wheel Chocks; Never Rely On The Jack Alone When Working Under The Vehicle.
• Ensure Towing Eye Is Screwed In Fully Before Applying A Tow; Check Thread Condition Prior To Use.
• Store The Kit Dry And Clean After Use To Minimize Corrosion; Refit The Holder Securely To Prevent Noise And Movement.

Common Causes Of Failure

Tool Kits Rarely ‘Fail’ Mechanically, But Problems Occur Due To Corrosion, Thread Damage, Bending Or Deformation From Overload, And Loss Or Theft Of Individual Items. Scissor Jacks Can Become Seized Or Bent If Used On Uneven Ground Or If The Vehicle Is Overloaded. Towing Eye Threads Can Be Damaged By Cross-Threading Or Severe Corrosion. Replace Any Component That Shows Significant Wear, Stripped Threads Or Structural Deformation.

Why Choose This Kit

This Replacement Tool Set Matches The Original Equipment Specification For Many Citroën And Peugeot Models, Making It A Practical Choice For Garage Stock Or For Drivers Who Want A Ready-To-Use, OEM-Compatible Kit. Part Numbers 673695, 672594, 671739 Are Frequently Used In Searches, So Including These Codes Helps You Find The Right Item Quickly.

The jack is engineered for secure and efficient vehicle lifting, facilitating tire changes and undercarriage repairs. Made from high-quality materials, the tools offer long-lasting durability and reliable performance even under frequent use.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C4 Picasso
• Product Codes: 6736A7, 674418, 672594, 671809, 671739
• Additional Numbers: Provided individually per part for improved identification and OEM specification matching

This kit not only enhances convenience but also increases safety on the road by enabling quick and effective responses to common issues such as tire punctures. Its compatibility with multiple models and carefully selected components make it an ideal choice for those seeking reliability and functionality in one package.

Ensure your vehicle is always ready for the road with our professional-grade tool set, trusted by mechanics and DIYers alike for quality and performance.

Finding high-quality and reliable replacement parts for Citroën and Peugeot vehicles can be challenging, but this tool set delivers the quality and durability needed for maintaining or repairing your car. The set covers common tasks such as wheel replacement and vehicle recovery, tailored precisely to the specifications of the Citroën C3 first generation.

Technical Information:

Manufacturer: PSA Citroën Peugeot
Model: Citroën C3, First Generation
Product Codes: 673672 6725A1 674414 671739

The jack included in this set is sturdy and secure, offering easy and safe lifting for tire changes. The wheel wrench is engineered to fit the lug nuts and bolts of the Citroën C3 wheels, ensuring quick and efficient loosening or tightening. Additionally, the tow eye is an indispensable accessory for vehicle towing scenarios.

This tool set is perfect for professional auto mechanics and DIY car enthusiasts who need a dependable and efficient solution for the routine maintenance of Citroën vehicles. Invest in this essential kit to simplify your work and keep your Citroën C3 in optimal technical condition.

Citroen and Peugeot are renowned for their automotive precision and quality, and this tool kit meets the specific standards required by these vehicles to guarantee proper fit and reliable use. While the components are used, they are fully functional and crafted to help maintain your vehicle’s performance and safety.

Technical Information

• Manufacturer: Original Parts for Peugeot 307, Citroen C4
• Model: Peugeot 307, Citroen C4
• Product Codes: 673687, 672594, 671739
• Additional Numbers: None

This tool kit is an ideal companion for professional mechanics as well as car owners performing their own maintenance and repairs. Its compatibility with Peugeot 307 and Citroen C4 models makes it a vital addition to any vehicle’s emergency kit, especially useful during unexpected roadside situations. The compact design allows convenient storage without consuming valuable trunk space.

Note: The yellow screw cover remover may not be included with the set.

Are you looking for reliable and quality auto parts for your Citroën C2? Our Tool Set, which includes a Wheel Key and Towing Eye, is the perfect choice for anyone wishing to perform maintenance or necessary repairs on their vehicle independently. This product is highly valuable for both mechanics and vehicle owners who carry out repairs themselves. Its specific design is precisely tailored for the Citroën C2 model, ensuring maximum compatibility and efficiency.

Technical Information:

• Manufacturer: PSA Peugeot Citroën
• Model: Citroën C2
• Product Codes: 671739, 674412, 7615C3, 673681, 6736J3
• Additional Numbers: Not available

This Tool Set is specially designed for users who demand reliability and high functionality. The Wheel Key for Citroën C2 is an essential tool for changing tires, while the Towing Eye is an invaluable assistant in case towing the vehicle is necessary. Thanks to the precise construction of these tools, their use is intuitive and quick, significantly reducing the time spent working on the vehicle.

Experience the quality of our parts that provide effective solutions for common and less common situations related to vehicle maintenance and repairs. This product is the perfect combination of efficiency, quality, and price, which is a prerequisite for the satisfaction of every mechanic or DIY enthusiast.

By choosing our product, you gain not only reliability but also the assurance of proper and safe performance of necessary repairs and maintenance of your Citroën C2. Trust the professionals and equip yourself with quality tools that will ease your work and save time for other activities.

The Jack allows for easy lifting of your vehicle, making tire changes and repairs efficient and safe. The Wheel Key ensures you can easily remove and attach wheels, while the Tow Hook is perfect for towing needs. Regular maintenance of these components is vital as they can wear out over time due to usage, so it’s wise to keep replacements on hand.

Technical Information

• Manufacturer: PSA
• Model: Citroën C4 PICASSO
• Product Codes: 6736A3, 674418, 672594, 671809, 671739
• Additional Numbers: Not applicable

The Set features a sturdy Jack designed to lift the vehicle safely, making tire changes and other repairs easier. The Wheel Key facilitates hassle-free access to wheel nuts for quick tire replacements.

The Tow Hook is built to assist in towing scenarios, providing reliability and strength. With a diameter of 38 cm, this set is compact yet efficient for storage and transportation.

The typical lifespan of these tools can vary, but they often face wear due to regular use, especially when used in harsh conditions. Regular checks and maintenance can extend their durability.

Having the right tools is crucial for vehicle maintenance, and this Set is built to deliver quality performance every time.

Technical Information

• Manufacturer: PSA
• Model: Peugeot 307
• Product Codes: 673687, 672594, 671739, 674416
• Additional Numbers: N/A

The jack offers reliable support for lifting vehicles securely, while the wheel key is essential for changing tires and ensuring proper installation. The towing eye provides a strong point for towing purposes, enhancing the vehicle’s functionality and safety.

When it comes to maintenance, it’s crucial to have the right tools at your disposal. This Tool Set not only ensures efficient repairs but also enhances vehicle safety during roadside emergencies. Regular checks and timely replacements can prevent unexpected breakdowns, making it an invaluable addition to your toolkit.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Citroën C4 GRAND Picasso
• Product Codes: 6736A3, 671739, 671809, 672594, 674418, 671747, 6711750
• Additional Numbers: 6711750, 671739, 671747, 671809, 672594

Equip yourself with the right tools for efficient and safe auto repairs. This Tool Set is designed to meet high standards, ensuring durability and reliability for all your vehicle maintenance needs.