Part description

This used handsfree microphone is designed for Citroën and Peugeot cars. It is a practical electrical part that is important for the proper functioning of hands-free communication in the vehicle. When looking for a spare part, matching according to the product number is essential, so we recommend paying attention to the codes listed.

The part is suitable as a replacement for the original malfunctioning, damaged or worn microphone. Thanks to the original design, the correct connectivity and compatible attachment within the relevant vehicle system is maintained.

Technical information

• Manufacturer: Stellantis Citroën Peugeot
• Model: Citroën C8, Peugeot 807
• Other numbers: NFP

Product codes

• Product codes: 96429749XT, 6563L5

Installation recommendations

Generally/typically, the exact procedure for replacing the handsfree microphone may vary depending on the specific model and make of the car. Below is a general and safe procedure for replacing this type of electrical part.

1) Before assembly

• Check if the part code matches the old part.
• Compare the shape of the connector, the length of the wiring and the method of attachment.
• Inspect the used part, whether it is mechanically damaged, dirty or with traces of unprofessional intervention.
• Check the condition of the contacts in the connector, whether they are bent, oxidized or loose.

2) Necessary tools and materials

• Basic set of hand tools
• Plastic pry bar for panel removal
• Cleaning agent for electrical contacts
• Clean cloth or tea towel
• Protective gloves

3) Step-by-step assembly procedure

1. Turn off the ignition and disconnect the vehicle battery for work safety.
2. Make sure you have access to where the handsfree microphone is located, depending on the interior design of the car.
3. Carefully remove the relevant covers or trim so as not to damage the handles.
4. Unplug the original microphone connector.
5. Remove the old microphone from the holder or mount.
6. Compare the old and new part – especially the connector, size and fit.
7. If necessary, gently clean the connector and the area around the mounting point.
8. Place the used microphone in its original mounting.
9. Connect the electrical connector so that the connection is firm and properly seated.
10. Reinstall all covers and removed interior parts.
11. Connect the battery.
12. Turn on the vehicle system and verify the functionality of the hands-free communication.
• 4) Post-assembly checks and functional test verification
  • Verify that the microphone is properly connected and the hands-free system is responsive.
  • Test the quality of voice transmission during a call.
  • Check if there is anything creaking, loose or poorly seated after assembly.
  • If the system does not work properly, recheck the connector and part seating.

  5) The most common assembly mistakes + how to avoid them

  • Exchanging a part based on appearance – always compare mainly product codes.
  • Interior trim damage – use appropriate plastic removal tools.
  • Poorly connected connector – after connection, check for proper seating and securing.
  • Assembly without checking the condition of the contacts – check for oxidation, dirt and mechanical damage before installation.
  • Insufficient microphone seating – verify that the part is firmly held in its original mounting and does not transmit vibrations.

  Reasons why the part is damaged

  • Normal wear and tear from long-term use
  • Moisture, dust or dirt in the interior of the vehicle
  • Damage to wiring or connector when disassembling interior parts
  • Microphone holder loosening or cracking
  • Defect caused by old electrical contacts
  ]]>