High-quality replacement speaker designed for Citroën and Peugeot applications, referenced under part numbers 9643162980 and 6562E8. Ideal for professional mechanics and DIY enthusiasts who need a reliable, direct-fit audio unit that restores clear mid-range sound. This speaker is commonly listed in searches by its product codes, so including those numbers when searching or ordering will speed up locating the correct part.

Features

• 130 Mm Diameter: Compact midrange unit suitable for many factory speaker locations.
• Direct-Fit Replacement: Designed to match original mounting dimensions and connector interfaces used on compatible Citroën/Peugeot models.
• Robust Construction: Built to withstand automotive operating conditions and deliver consistent sound reproduction.
• Suitable For Workshop Use: Practical choice for quick speaker swaps during door or trim repairs.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C3 (Common Application) / Various Citroën And Peugeot Models
• Product Codes: 9643162980, 6562E8
• Additional Numbers: 656200000000, 9634826580, 9634826680

Installation Recommendations

• Safety First: Disconnect the vehicle battery before starting work to avoid short circuits when handling electrical connectors.
• Remove Trim Carefully: Pry off door or trim panels using appropriate trim tools to avoid breaking clips or scratching panels.
• Disconnect Connector: Unplug the speaker harness and note any foam seals or gasket placement for correct reassembly.
• Secure Mounting: Fit the new speaker into the original mounting position, use the correct screws, and ensure the speaker sits flush to avoid rattles.
• Test Before Final Fitment: Power the audio system briefly to verify operation and polarity before reinstalling trim panels.

Reason Why Part Fails Most Often

• Mechanical Damage: Cone tears or punctures from physical impact during door repairs or by sharp objects.
• Moisture Ingress: Water reaching the speaker (from window seals or door leaks) causes corrosion and cone/voice-coil damage.
• Ageing Materials: Foam surrounds and adhesives degrade over time, producing distortion or loss of output.
• Electrical Overload: Excessive amplifier power or short circuits can burn the voice coil and render the speaker inoperative.
• Connector Corrosion: Poor electrical contact due to oxidized terminals leads to intermittent sound or complete failure.

Notes

Part numbers such as 9643162980 and 6562E8 are commonly used when searching for this speaker. Confirm the listed codes against your vehicle documentation or parts lookup to ensure compatibility with the intended mounting location.

Overview

This replacement speaker is designed for a range of Citroën and Peugeot models and is suitable for professional workshops and DIY mechanics. With a 130 mm diameter, it restores clear midrange and vocal reproduction in door and dashboard locations where the original speaker has failed. The unit is supplied with OE reference numbers commonly used when searching for spare parts, making it easy to find and order by code.

Applications

• Citroën C‑Elysée
• Citroën C3 II
• Citroën C4 II
• Citroën C4 Picasso
• DS3
• DS4
• Peugeot 3008 I
• Peugeot 301
• Peugeot 308 (T9)
• Peugeot 5008 I

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C‑Elysée, Citroën C3 II, Citroën C4 II, Citroën C4 Picasso, DS3, DS4, Peugeot 3008 I, Peugeot 301, Peugeot 308 (T9), Peugeot 5008 I
• Product Codes: 9665245280, 6562E8, 6562AE
• Other Numbers: 6562.AE, 656200000000, 6562AE, 6562E8, 9665245280
• Diameter: 130 mm

Installation Recommendations

Replacement is straightforward for an experienced mechanic and can be completed with basic trim tools. Recommended procedure:

• Disconnect the vehicle battery negative terminal before starting work to avoid short circuits when handling electrical connectors.
• Remove the trim or speaker grille and any door card fasteners using plastic trim tools to avoid damage to clips and panels.
• Unscrew the original speaker, unplug the factory connector and note the polarity of the wiring (mark positive/negative if necessary).
• Compare the new speaker with the original for mounting hole alignment and depth; use an adapter bracket or gasket if required to ensure a secure fit and proper seal.
• Connect the speaker, respecting polarity, and test audio at low volume before final assembly to confirm correct operation.
• Reinstall speaker screws evenly without over‑tightening to prevent frame distortion. Refit trims and confirm there are no panel rattles.
• Consider adding a thin foam gasket or sound‑deadening mat between speaker and mounting surface to improve bass response and reduce vibrations.

Why This Part Typically Fails

Speakers commonly fail due to age and environmental factors. Typical causes include deterioration of the surround or cone material, water ingress from window seals or door leaks, corrosion of terminals and connector contacts, mechanical damage from impact, and thermal damage or voice‑coil burnout caused by excessive amplifier clipping. Symptoms are buzzing, rattling, distorted sound or complete loss of audio from the affected channel.

Notes

Search by OE code for fastest identification. Ideal for restoring original sound quality in affected Citroën and Peugeot vehicles listed above. Recommended for replacement by trained technicians or experienced DIYers who follow safe working practices.

Product Overview

This 130 mm speaker is an OE-fit audio component designed for a range of Citroën and Peugeot models. It is commonly searched and ordered by part numbers such as 9634826680 and 6562E8, which makes it easy for professionals and DIY mechanics to find the correct replacement. The speaker delivers reliable midrange performance for factory audio systems and is suitable for direct replacement in compatible doors or dashboard locations where 130 mm units are fitted.

Compatibility

Fits various Citroën and Peugeot models including, but not limited to:

• Citroën C2
• Citroën C3
• Citroën C3 Picasso
• Citroën C3 Pluriel
• Citroën Xsara
• Citroën Xsara Picasso
• Peugeot 307
• Peugeot 308

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Speaker 130 mm
• Product Codes: 9634826680, 6562E8
• Additional Numbers: 6562.E8, 656200000000

Installation Recommendations

• Recommended Tools: Trim removal tool, Phillips or Torx screwdriver (depending on vehicle), 10 mm socket set, multimeter or test speaker leads.
• Basic Steps: Remove the inner door card or speaker grille, unplug the speaker connector, unscrew the old speaker, check mounting depth and wiring polarity, fit the new speaker using original screws or equivalent, connect wiring (observe polarity), test the speaker before reassembling trim.
• Practical Tips: Verify connector pins for corrosion and clean if necessary; ensure the speaker sits flush to avoid rattles; do not overtighten screws which can deform the frame; test audio at low volume first to confirm correct polarity and operation.
• For Professional Installers: Use appropriate trim tools to avoid damaging clips and seals. If foam seals or moisture barriers are present, inspect and replace if damaged to protect the new speaker from water ingress.

Why This Part Fails Most Often

Common failure modes include cone or surround deterioration (especially in older cars or where moisture is present), voice coil damage from excessive volume or amplifier faults, corrosion of terminals and connectors, and water ingress from damaged door seals. Mechanical wear and long-term exposure to temperature and humidity are frequent causes of sound degradation or complete failure.

Notes For Buyers

This item is typically sold and searched by its part numbers (9634826680, 6562E8, 6562.E8). Before installation, confirm speaker fitment in the intended mounting location (130 mm) and check speaker depth to avoid interference with door mechanisms. The product is aimed at auto technicians and competent DIYers who carry out audio or door-panel repairs.