This replacement antenna is designed for Citroën and Peugeot vehicles and corresponds to common OEM references used by Stellantis. Ideal for professional workshops and experienced DIY mechanics, the unit restores reliable radio reception and a factory-fit appearance. Many customers search directly by product number (e.g. 9674768680, 9810547980, 658724) — these codes are included below to help you find the correct part fast.

Features and Function

The antenna assembly provides stable AM/FM radio reception and a secure roof mounting. The assembly typically includes the mast/base, coaxial connection and roof sealing. On some vehicle versions the antenna base is combined with an amplifier module; compatibility depends on the original equipment fitted to the vehicle.

Suitable For

• Citroën C3
• Citroën C3 Picasso
• Citroën C4 Picasso
• Peugeot 308

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Antenna / Roof Antenna
• Product Codes: 9674768680, 9810547980, 658724, 6587G4, 6587G3
• Additional Numbers: 6580J0, 6561JT, 6561JS

Installation Recommendations

Recommended tools: Torx/Spline sockets, trim removal tools, adjustable wrench, sealant for roof fittings and dielectric grease for connectors. Typical replacement steps:

• Disconnect the negative battery terminal before starting the job to avoid short circuits.
• Remove interior roof trim or headliner section as required to access the antenna base from inside the vehicle.
• Unscrew the external mast (if fitted) and unbolt the antenna base retaining nut.
• Disconnect the coaxial connector and any power or amplifier plugs carefully to avoid damaging clips or wiring.
• Clean the roof sealing surface, fit the new antenna with new gasket/sealant as required, connect the coax and electrical connectors and tighten the retaining nut to the correct torque.
• Reinstall trim/headliner, reconnect the battery and verify radio reception and any amplifier function.

If you are unsure about removing interior trim or working at roof level, have the replacement performed by a qualified technician.

Why The Part Commonly Fails

Common causes of antenna failure include water ingress at the base leading to corrosion, oxidation of the coaxial connector, mechanical damage from impacts or vandalism, and wear of internal cables. In vehicles with an integrated amplifier, electrical faults or moisture can also cause loss of reception. Failure symptoms are weak or intermittent radio signal, static, or complete loss of reception on AM/FM bands.

When replacing the antenna, check the coaxial cable and connector condition and ensure the roof sealing is restored to prevent future water entry.

Product Numbers For Search: 9674768680 | 9810547980 | 658724 | 6587G4 | 6587G3 | 6580J0 | 6561JT | 6561JS

Original FM + GPS roof antenna for Peugeot 3008 I and 5008 I. Ideal replacement for a non-functional antenna base with poor radio reception or GPS outages. Thanks to the identical OEM codes (6561XT, 9664509580), installation is plug & play without the need for coding – simply replace and drive.

This combined antenna ensures quality FM radio reception and a reliable GPS signal for PSA factory navigation (eg RNEG/WipNav, RT6/eMyWay). It is located on the rear part of the roof, where it is attached with a central screw and sealed with a rubber ring. There are usually two coaxial outputs on the body of the unit (typically Fakra) – separately for FM and for GPS. Please check the number and type of connectors according to your car.

Compatibility is factory set for the first generation Peugeot 3008 (T84, approx. 2009-2016) and Peugeot 5008 (T87, approx. 2009-2016). PSA used several close variants; codes 6561XT and 9664509580 correspond to the FM+GPS version. Alternate numbers 6561JT and 6561JS indicate related versions. Before purchasing, compare the code on your original part, possibly the shape of the base and connectors.

Typical problems that this replacement solves: fluctuating or weak FM reception, “no GPS signal”, slow location finding, navigation crashes. The cause is usually a hardened seal, ingress of water into the base and subsequent oxidation of the preamplifier or connectors. Replacing a complete unit is usually faster and more reliable than partial repairs.

Brief replacement procedure: we recommend disconnecting the minus pole of the battery, freeing the rear part of the roof panel, disconnecting the coaxial connectors from the old antenna, loosening the center nut, removing the unit from the body, cleaning the seating surface and checking the seals. Install the new antenna, tighten the nut (do not switch to avoid deformation of the sheet metal), plug in the connectors and test FM and GPS reception.

Always check OEM codes and connectors match for error-free assembly. If your vehicle has special equipment (e.g. built-in handsfree with GSM antenna), there may be other versions with three connectors – this item is for the FM + GPS variant.

Technical information

• Manufacturer: PSA – Citroën/Peugeot (original part)
• Model: Peugeot 3008 I (T84, 2009-2016), Peugeot 5008 I (T87, 2009-2016)
• Product codes: 6561XT
• Other numbers: 9664509580, 6561JT, 6561JS

If you are looking for a reliable roof antenna replacement for your Peugeot 3008/5008, this unit with codes 6561XT / 9664509580 is a proven choice. You get stable FM reception and accurate GPS positioning without complex adjustments.

This replacement roof antenna assembly is designed for Citroën and Peugeot models and provides reliable AM/FM reception and vehicle radio connectivity. Ideal for professional mechanics and DIY enthusiasts, the unit fits OE mounting patterns and is often searched by part numbers such as 9666154380, 6561JT, 6561JS and 6587G3. The compact base with mast offers straightforward installation and a factory‑style appearance.

Key Benefits

Improves radio reception after original unit failure, restores aesthetic roofline finish and uses standard coaxial connector for direct fit. Durable design resists vibration and weather exposure when properly installed. Including the correct part number in your search increases the chance of finding the exact replacement quickly.

Compatibility

• Citroën C3 II
• Citroën DS3
• Peugeot 3008 I
• Peugeot 5008 I

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C3 II, Citroën DS3, Peugeot 3008 I, Peugeot 5008 I
• Product Codes: 9666154380
• Other Numbers: 6561JT, 6561JS, 6587G3, A51

Installation Recommendations

• Prepare the vehicle by parking on a flat surface and protecting paintwork around the roof area.
• Remove interior trim or roof lining access panel as required to reach the antenna nut and cable entry point.
• Disconnect the antenna coaxial connector before removing the antenna assembly.
• Unscrew the retaining nut securing the antenna base from the roof (support the antenna from above to avoid dropping it).
• Fit the new antenna base and mast, ensure correct sealing to prevent water ingress, and reconnect the coaxial cable.
• Tighten fasteners to the manufacturer’s recommended torque and check the roof sealing; avoid overtightening to prevent deformation of the base.
• After installation, verify radio reception and that the antenna mast is secure. If applicable, check any antenna amplifier or diversity system operation.

Why This Part Most Commonly Fails

• Corrosion at the base or connector caused by water ingress and aging seals.
• Physical damage from impact, car washes or roof racks that bend or break the mast.
• Connector corrosion or broken coaxial cable leading to intermittent or no reception.
• Internal antenna amplifier failure (if fitted) due to moisture or electrical issues.

Practical Tips

• Always confirm the part number (e.g., 9666154380 or 6561JT) when ordering — these are commonly used search terms.
• Inspect the rubber gasket and roof sealing surface during replacement; replace seal or use appropriate automotive sealant if necessary to avoid leaks.
• If reception issues persist after replacement, check the coaxial cable continuity and any inline amplifiers or diversity modules.

Ready for professional installation or competent DIY fitting. Order the correct part number to ensure fitment and restore reliable radio function to your Citroën or Peugeot.

Replacement whip antenna designed for Citroën and Peugeot models, commonly referenced under codes 9658544380, 6561JQ, 6561JT and 6561JS. This roof-mounted mast antenna restores clear AM/FM reception, is simple to fit and is ideal for mechanics and DIY enthusiasts who need a direct replacement part for radio systems on Citroën C4, C4 Picasso and Peugeot 308. Use these product codes when searching to quickly locate the correct unit.

Key Features

– Roof-mounted whip (mast) design for reliable AM/FM reception.
– Direct-fit replacement for original equipment on listed models.
– Durable metal mast with threaded base for secure mounting.
– Compatible with common OE codes 9658544380 / 6561JQ / 6561JT / 6561JS.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C4; Citroën C4 Picasso; Peugeot 308
• Product Codes: 9658544380, 6561JQ, 6561JT, 6561JS
• Other Numbers: 6561JQ | 6561JS | 6561JT | 9658544380

Installation Recommendation

Intended for fitment by trained mechanics or experienced DIYers. Typical installation steps:

• Gather tools: adjustable wrench or suitable socket, trim removal tools, cleaning cloth, dielectric grease or anti-seize.
• Access the antenna base from inside the roof lining if required (some models allow external unscrewing of the mast). Remove any interior trim carefully to reach the mounting nut.
• Unscrew the old mast from the base or remove the securing nut underneath the roof liner. Inspect the base, cable connector and seal.
• Clean mating surfaces and cable contacts. Apply a small amount of dielectric grease to the connector to prevent corrosion.
• Fit new sealing washer or gasket if available, screw the new mast into the base or secure the base with the nut. Do not overtighten—ensure a firm, watertight fit.
• Reinstall interior trim, test radio reception and check for water ingress after a wash or rain.

Why The Part Commonly Fails

• Mechanical Damage: Mast frequently bent or broken by automated car washes, low garage entrances, branches or vandalism.
• Corrosion: Thread and connector corrosion from long-term exposure to moisture reduces electrical contact and makes removal difficult.
• Seal Degradation: Deteriorated rubber gasket allows water ingress, leading to connector corrosion and poor reception.
• Poor Contact: Loose or oxidised connector at the base causes intermittent or weak signal.

Notes: When replacing the antenna, always check the condition of the base, cable and sealing washer. Replacing the gasket when fitting a new mast prevents future water leaks. After installation verify radio reception across AM and FM bands and ensure the mount is secure to avoid vibration noise.