High-quality replacement antenna assembly designed for Citroën Xsara Picasso models. This complete unit includes the antenna body and the attached coaxial cable ready for direct installation. Ideal for mechanics and experienced DIYers who search parts by OE number — common reference numbers are included below to help you find the correct fit. The antenna restores reliable AM/FM radio reception and replaces damaged, corroded or broken roof aerials with a factory-style solution.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: Citroën Xsara Picasso
• Product Codes: 9658881880, 6561A0, 6561EF, 6561A1
• Additional Numbers: 6561A0 | 6561A1 | 6561EF | 9658881880

Compatibility And Fitment

Fits Citroën Xsara Picasso models using the roof-mounted antenna assembly with the above part numbers. Frequently searched and ordered by OE code (e.g., 9658881880), so check the vehicle’s existing part label before ordering to confirm fitment.

Recommended Installation

Installation is straightforward for a technician or experienced DIYer. Typical procedure:

1. Remove interior roof trim or headliner access panel to reach the antenna base nut and cable routing.
2. Unscrew the retaining nut at the antenna base from the roof and carefully disconnect the coaxial connector.
3. Pull the old antenna and cable through the roof hole, feed the new cable into place and secure the antenna base with the original hardware, using a suitable sealant or new gasket if provided.
4. Reconnect the coaxial connector to the radio and refit interior trim. Test reception and secure any loose cable routing.

Tools and tips: Use a torque wrench or appropriate hand tools to avoid over-tightening the antenna base. Replace the roof gasket or sealing washer if brittle to prevent water ingress. Test the radio reception immediately after installation to confirm correct electrical connection.

Why This Part Fails

Common failure causes include:

• Corrosion At The Antenna Base: Prolonged exposure to weather and humidity causes rust and poor electrical contact.
• Water Ingress: Damaged seals allow water into the roof aperture and onto the cable connector, degrading signal or shorting connections.
• Mechanical Damage: Antenna mast can be bent or broken by car washes, low overhangs or vandalism.
• Cable Damage Or Connector Wear: Internal cable breaks or corroded connectors reduce or interrupt signal transfer to the radio.

Typical Service Life: Varies with environment and care; many antennas last several years but can fail earlier if exposed to frequent moisture, road salt, or physical impact.

Practical Advice

When replacing the antenna, inspect the coaxial cable continuity and connector condition. If the vehicle exhibits intermittent reception or noise, check for a damaged ground or poor connector contact before replacing the entire unit. Keep spare sealing components on hand and ensure the roof hole is clean and dry prior to fitting the new antenna.

High-quality roof mast antenna designed as a direct-fit replacement for a range of Citroën and Peugeot models. Ideal for professional garages and DIY mechanics, this antenna restores reliable AM/FM reception and matches original equipment part numbers 9650911180, 6561Y1, 6561A0 and 6561W5. The rugged rod design ensures stable reception and straightforward installation, making it a practical choice when the original mast is damaged, corroded or suffering from poor signal.

Features

• Rod-Type Mast: Simple, robust design for consistent radio reception.
• OEM Part Number Compatibility: Fits vehicles using part numbers 9650911180, 6561Y1, 6561A0, 6561W5.
• Easy Replacement: Designed for direct swap with factory mounting points and coax connector.
• Professional and DIY Friendly: Suitable for automechanics and experienced home mechanics.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C5; Peugeot 307 (I / II); Peugeot 407
• Product Codes: 9650911180, 6561Y1, 6561A0, 6561W5
• Additional Numbers: 6561A0 | 6561W5 | 6561Y1 | 9650911180

Installation Recommendations

Remove the old mast by unscrewing it from the base and disconnecting the coaxial cable at the connector or under the trim. Inspect the antenna base, sealing gasket and surrounding roof area for corrosion or damage. Clean the mating surfaces and replace worn gaskets to ensure a watertight fit. Screw the new mast into the base by hand and then secure to a snug fit—avoid excessive torque to prevent thread or base damage. Reconnect the coaxial connector and test AM/FM reception and radio operation before reassembling any removed trim. Use basic hand tools; professional fitment is quick for an experienced technician.

Why This Part Most Often Fails

• Mechanical Damage: Mast bending or breaking from car washes, low-clearance obstacles or vandalism.
• Corrosion And Water Ingress: Salt and moisture lead to base corrosion or poor electrical contact.
• Connector Wear: Oxidation or loose coax connection causing intermittent reception or signal loss.
• Aging Materials: Rubber seals and gaskets harden over time, allowing moisture entry and electrical issues.

Fitment And Notes

This antenna is commonly fitted to Citroën C5 and Peugeot 307 / 407 applications using the listed OEM numbers. Customers frequently search by part number in repair shops and online catalogues, so listing the original codes helps find the correct replacement quickly. Always verify physical match (mounting type and connector) when replacing an aftermarket or non-original antenna.

Order this antenna mast to restore reliable radio reception and maintain the vehicle’s original appearance and function. Suitable for routine replacement during bodywork or when reception degrades due to damage or corrosion.

Antenna Citroën Peugeot 6561A1 6561A0 – original used part for reliable radio reception
Are you looking for a replacement for a damaged or noisy roof antenna? This genuine PSA part marked 6561A1 / 6561A0 is especially suitable for Citroën Xsara Picasso and other Citroën/Peugeot cars that use this OE number. The ideal choice for car mechanics and home repairs – easy assembly, certain compatibility according to the part code and a significantly better price/performance ratio compared to non-original replacements.

Key features
– Original PSA part from disassembly: quality design, exact fit
– Designed for: Citroën Xsara Picasso (selected years and equipment)
– Function: AM/FM radio reception (rod roof antenna)
– Location: car roof (usually rear)
– Design: roof rod antenna; some versions may have an integrated amplifier (power supply via coaxial cable – depending on the car’s equipment)
– Fastening: through screw with nut from the interior; sealing the base against water
– Connector: coaxial (type may vary depending on year and equipment – compare with original part)

OE/OEM numbers and interchangeability
– OE PSA: 6561.A1, 6561.A0
– Alternative notations: 6561A1, 6561 A1, 6561.A0, 6561 A0, PSA 6561A1, PSA 6561A0
– Always verify compatibility by part number, possibly by VIN or by comparing the connector and mount with the original part.

Condition and contents of the package
– Used, fully functional disassembled part, normal cosmetic signs of use do not affect function
– The delivered design and completeness (base/rod/cabling) see photos and description of the specific offer

Why choose this part?
– Stable radio reception without noise and dropouts
– Original PSA quality – better reliability than cheap universal antennas
– Savings compared to a new part, at the same time an ecological choice

Assembly tips for mechanics
– Check the base seal before assembly; replace when worn to prevent leakage
– Tighten the nut carefully, do not damage the paint or the thread
– If the car has an antenna amplifier, make sure the power supply (phantom over coax) and the correct type of connector (FAKRA/ISO); if necessary, use a suitable adapter
– Guide the cable along the original route under the ceiling, you will avoid interference and pinching of the wire

Compatibility
– Citroën Xsara Picasso (according to equipment and OE code 6561A1/6561A0)
– May also fit other Citroën/Peugeot cars using the listed OE number – check by part/VIN.

Also searched for: Citroën car radio antenna, Peugeot antenna, Xsara Picasso roof antenna, antenna base, antenna rod, PSA 6561A1, PSA 6561A0.

Description

High-quality roof antenna designed for Citroën C4 II (B7) and DS4 vehicles. The unit replaces the factory antenna and comes complete with the antenna mast. It restores reliable AM/FM reception and ensures stable signal pick-up for everyday driving. Ideal for professional workshops and DIY enthusiasts looking for a direct-fit replacement using OE reference numbers.

Technical information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C4 II (B7); DS4
• Product Codes: 9665363880; 658770
• Additional Numbers: 658772; 6561A0

Function

The antenna provides radio reception for AM/FM bands and is the primary aerial for the vehicle’s radio system. The mast transmits collected signals down to the antenna base and coax cable into the head unit. Properly mounted and sealed, it maintains consistent reception and prevents water ingress at the roof feed-through.

Replacement And Fitting Instructions

Removal and installation are straightforward for experienced technicians and competent DIYers. Typical procedure:

• Park the vehicle on level ground and switch off the ignition.
• Carefully remove the interior roof lining or access trim to reach the antenna nut if required.
• Unscrew the antenna mast from the base (often by hand or with an appropriate socket) and disconnect the coax connector.
• Remove the antenna base fixing nut and lift the old unit away, taking care to preserve any sealing gasket.
• Clean the mounting area, fit the new seal/gasket, position the new antenna base, tighten to the manufacturer’s torque specification, reconnect the coax and fit the mast.
• Test radio reception and check for water tightness after installation. Refit interior trims.

Installation Recommendations

• Perform installation in a dry, sheltered environment to ensure correct sealing.
• Use the correct size tools and do not overtighten plastic components to avoid cracking the base.
• Inspect the coax connector for corrosion or damage and replace the cable if degraded to restore optimal reception.
• After fitting, verify reception across AM/FM bands and drive-test to confirm signal stability.

Why The Part Most Commonly Fails

Roof antenna masts typically fail due to mechanical damage (car washes, vandalism, impact) or progressive corrosion at the mast or connector. Water ingress from a damaged or aged gasket can lead to poor reception and, in some cases, electrical corrosion at the coax connector. Fatigue or loosening of the base fixing may also cause intermittent reception or rattling noises.

Durability And Maintenance

There is no fixed replacement interval—these parts commonly last many years under normal use. Inspect the mast and base periodically for physical damage, ensure the sealing gasket remains intact, and clean connectors if reception degrades. Prompt replacement after visible damage will prevent water leaks and preserve the vehicle’s interior and electronics.

Ordering Information

Search by OE reference numbers (9665363880, 658770, 658772, 6561A0) to find this exact fit for Citroën C4 II (B7) and DS4 models. Suitable for workshops and DIY repairs where a direct-fit antenna mast with proven vehicle references is required.

Product Overview

This roof/boot antenna assembly with integrated rear washer nozzle is an OEM-style replacement designed for Citroën C5 (first generation) owners and professional technicians. Supplied under part references 9650910980 / 6561Y0 / 6561A0, the unit restores reliable radio reception and the rear glass washer function in a single compact module. Ideal for automechanics and DIY enthusiasts who search by part number.

Function and Benefits

• Primary Function: Provide FM/AM radio reception for the vehicle while housing the rear washer nozzle for the rear window.
• Integrated Design: Combines antenna and washer outlet to reduce external fittings and maintain factory appearance.
• Benefits: Restores signal quality, prevents water ingress behind the headliner when properly installed, and returns the washer spray to factory position.

How It Is Replaced

Replacement is straightforward for a trained technician: remove the interior trim of the tailgate/roof area to access the antenna base, disconnect the electrical connector and the washer hose, unscrew the retaining nuts or bolts, remove the old unit and fit the new antenna with a new seal. Reconnect the washer hose and the electrical connector, secure fasteners to the correct torque, reassemble trim and test radio reception and washer operation. Always ensure wiring is not pinched and that the seal sits flush to avoid water ingress.

Installation Recommendations

• Disconnect the vehicle battery before working on electrical connectors to avoid short circuits.
• Use new sealing gasket or sealant if the old one is damaged to maintain watertightness.
• Check and, if necessary, clean or replace the washer hose and nozzle to ensure proper spray pattern.
• Verify radio reception and rear washer function after installation; adjust antenna mast position if adjustable.
• Fasten mounting hardware to manufacturer torque specifications where available.

Why This Part Fails

Common failure modes include water ingress and corrosion at the base or connector, mechanical damage to the mast or washer nozzle, clogged washer jet or hose, and degraded seals that allow moisture into the connector or cable. Electrical connector corrosion and damaged coaxial cable can cause poor or intermittent radio reception. Exposure to road salts and long-term UV/weathering accelerates deterioration.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C5 First Generation
• Product Codes: 9650910980, 6561Y0, 6561A0
• Additional Numbers: NFP

Notes for Professionals and DIYers

This antenna is commonly searched by its part numbers—include them in queries to find the correct replacement quickly. When replacing, inspect surrounding wiring, connectors and the washer plumbing to prevent repeated visits. If the radio reception remains poor after replacement, check the coaxial cable continuity and head-unit input.

Keywords

Citroën C5 antenna, rear window antenna with washer, antenna 9650910980, 6561Y0, 6561A0, rear washer nozzle, OEM antenna replacement.

Are you looking for a reliable replacement antenna for your Citroën C5 Sedan? Introducing the antenna without washer specifically designed for the first-generation Citroën C5 models, an ideal choice to restore your vehicle’s original functionality.

This high-quality used part is highly sought after for its specific function and easy installation. It allows you to replace a damaged or non-functional antenna, restoring both the aesthetics and functionality of your car’s rear section. Thanks to its design without an integrated washer, it offers a simple and direct replacement for the original part.

Technical Information

• Manufacturer: PSA CITROEN PEUGEOT
• Model: Citroën C5 Sedan – First Generation
• Product Codes: 9650911080, 6561A0
• Additional Numbers: NFP

This antenna is intended for users who prefer the original appearance and functions of their vehicle while seeking an effective solution at a reasonable price. The antenna replacement process is relatively quick and suitable for both professional mechanics and experienced car owners, making it an excellent choice for DIY vehicle repair projects. It helps maintain the vehicle’s original look and functionality without the need for further adjustments.

Investing in a quality used part like this antenna is not only economically advantageous but also supports sustainability by extending the life of existing components. Add this excellent component to your shopping cart and restore full functionality to your Citroën C5 without unnecessary complications.

This product is compatible with multiple Citroën and Peugeot models, making it a versatile choice for mechanics and DIY enthusiasts alike. Replacing your vehicle’s antenna is crucial, especially if you notice reduced sound quality or difficulty tuning into stations. An antenna typically wears out due to exposure to the elements, mechanical damage, or wear and tear over time.

To replace the antenna, simply detach the old unit from its mounting and connect the new antenna in its place, following your vehicle’s service manual for specific instructions. Regular maintenance of this component can prevent issues with signal reception and maintain a high-quality audio experience.

Technical Information

• Manufacturer: PSA
• Model: Citroën & Peugeot
• Product Codes: 6561A0
• Additional Numbers: N/A