<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>6447RZ &#8211; Used Parts Vendor</title>
	<atom:link href="https://www.usedpartsvendor.com/product-tag/6447rz/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.usedpartsvendor.com</link>
	<description>Citroën Peugeot spare parts</description>
	<lastBuildDate>Thu, 12 Nov 2026 03:04:50 +0000</lastBuildDate>
	<language>en-GB</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	<generator>https://wordpress.org/?v=7.1.4</generator>
	<item>
		<title>Heater Servo Motor BEHR H1959 U b 14 Citroën Peugeot EAD512 6447RZ</title>
		<link>https://www.usedpartsvendor.com/cooling-heating-climate/servo-motor-heating/c4-servo-motor-heating/servo-heater-behr-h1959-u-b-14-citroen-peugeot-ead512-6447rz-2/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Wed, 17 Dec 2025 03:03:26 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/servo-heater-behr-h1959-u-b-14-citroen-peugeot-ead512-6447rz-2/</guid>

					<description><![CDATA[Stellantis citroën peugeot
6447RF EAD512 H1959 U b 14]]></description>
										<content:encoded><![CDATA[<p>Heater servo motor for CITROËN C4 and PEUGEOT 307 II vehicles.</p>
<p>This BEHR heater servo motor (HVAC actuator) is designed to control the heating/ventilation flap movement in the climate box of Citroën C4 and Peugeot 307 II models. A direct-fit replacement for worn or noisy actuators, it restores precise control of airflow direction and blend temperature. The unit is suitable for professional workshops and experienced DIY mechanics who maintain Stellantis vehicles and often search by part number (e.g. 6447RF, 6447RZ, H1959).</p>
<h3>Key Features</h3>
<ul>
<li>Direct replacement for original HVAC flap actuators on Citroën C4 and Peugeot 307 II.</li>
<li>Controls blend/mode/recirculation flaps depending on vehicle configuration.</li>
<li>Improves climate control responsiveness and removes clicking or grinding noises from the dashboard area.</li>
<li>Supplied with electrical connector compatible with the original harness (check product codes for exact fit).</li>
</ul>
<h3>Replacement Procedure</h3>
<p>Typical replacement is straightforward for trained mechanics and competent DIYers with basic tools. General steps:</p>
<ul>
<li>Disconnect the negative battery terminal before starting work.</li>
<li>Gain access to the actuator location (commonly behind the glovebox or lower dashboard panel depending on model).</li>
<li>Remove necessary trim panels and the glovebox to expose the HVAC housing.</li>
<li>Unplug the electrical connector and remove mounting screws securing the actuator to the heater box.</li>
<li>Fit the new actuator in the correct orientation, secure with screws, reconnect the electrical connector and reassemble trim.</li>
<li>Reconnect the battery and cycle the ignition/AC controls to confirm correct operation and allow any automatic flap calibration sequence.</li>
</ul>
<h3>Installation Recommendations</h3>
<ul>
<li>Always disconnect the battery before disassembly to avoid short circuits and protect vehicle electronics.</li>
<li>Keep the work area clean to prevent debris entering the HVAC housing; replace the cabin filter if contaminated.</li>
<li>Handle the actuator gears gently; plastic gear teeth can be brittle after long service life.</li>
<li>After installation, verify full range of movement for the controlled flaps and check for unusual noises or binding.</li>
<li>If the actuator is part of a multi-motor HVAC system, ensure other actuators operate correctly to avoid incorrect feedback during calibration.</li>
</ul>
<h3>Common Failure Causes</h3>
<ul>
<li>Plastic Gear Wear: Repeated movement and age cause teeth to wear or strip, producing clicking or grinding sounds and loss of position control.</li>
<li>Motor Burnout: Internal DC motor or gearbox failure from prolonged use or electrical faults.</li>
<li>Water Ingress and Corrosion: Leaks or high humidity can corrode connectors and internal components.</li>
<li>Obstruction and Debris: Foreign objects or degraded insulation/cabin filter fragments can jam flaps and overload the actuator.</li>
<li>Connector/Cable Issues: Poor electrical contact or broken wires lead to intermittent operation.</li>
</ul>
<h3>Typical Lifespan</h3>
<p>Service life depends on usage, climate and maintenance. Actuators commonly begin to fail after several years of service—many vehicles experience issues in the 8–12 year range or after high mileages—though this varies by usage and environment.</p>
<h3>How Failures Manifest</h3>
<ul>
<li>Clicking or grinding noises from the dashboard area when changing temperature or air distribution.</li>
<li>Inability to change temperature accurately or to direct airflow to selected vents.</li>
<li>Stuck flaps or limited range of movement causing inconsistent heating/cooling performance.</li>
<li>Possible HVAC fault codes or warning messages on some dashboards.</li>
</ul>
<h3>Technical Information</h3>
<ul>
<li>Manufacturer: BEHR</li>
<li>Model: Citroën C4; Peugeot 307 II</li>
<li>Product Codes: 6447RF, 6447RZ, H1959, U b 14</li>
<li>Additional Numbers: EAD512</li>
</ul>
<h3>Compatibility Notes</h3>
<p>This actuator is commonly referenced by the part numbers shown above and fits HVAC systems used on Citroën C4 and Peugeot 307 II variants. Always confirm the part number match against the unit being replaced before installation.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Behr Heater Servo Motor B5783U/44 for Citroën/Peugeot EAD512 6447RZ</title>
		<link>https://www.usedpartsvendor.com/cooling-heating-climate/servo-motor-heating/c4-servo-motor-heating/servo-heater-behr-b5783-u-a-44-citroen-peugeot-ead512-6447rz-2/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Sat, 28 Dec 2024 03:08:53 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/servo-heater-behr-b5783-u-a-44-citroen-peugeot-ead512-6447rz-2/</guid>

					<description><![CDATA[Used PSA (Peugeot and Citroën) car parts — part numbers: 6447RF, EAD512, B5783, U44]]></description>
										<content:encoded><![CDATA[<p>Heating Servo Motor Citroën C4 Peugeot 307 II<br />EAD 512</p>
<p>Searching for a reliable replacement part for your Citroën or Peugeot vehicle&#8217;s heating system? The BEHR B5783 U heating servo motor is the perfect choice for Citroën C4 and Peugeot 307 II owners. This high-quality automotive part ensures optimal functionality to meet demanding technical requirements.</p>
<p>The heating servo motor is a crucial component of the vehicle&#8217;s heating system, responsible for precise temperature regulation and air distribution inside the cabin. This guarantees fast and efficient warming on cooler days, enhancing passenger comfort and safety.</p>
<h3>Technical Information</h3>
<ul>
<li><strong>Manufacturer:</strong> BEHR</li>
<li><strong>Model:</strong> Citroën C4, Peugeot 307 II</li>
<li><strong>Product Codes:</strong> 6447RF, EAD512, B5783 U and 44</li>
<li><strong>Additional Numbers:</strong> 6447RZ</li>
</ul>
<p>You can replace this heating servo motor yourself or seek assistance from a professional mechanic. The part is usually accessible from the vehicle&#8217;s interior, which simplifies installation. For optimal performance, regular inspection and maintenance of the entire heating system are recommended.</p>
<p>Before purchasing, please verify product compatibility with your vehicle’s model and product codes to ensure full functionality. Should you have any questions regarding installation or the part&#8217;s operation, feel free to contact us. We are here to support you in maintaining smooth operation of your vehicle.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Heater Actuator BEHR H1959 U b 21 Citroën Peugeot EAD512 6447RZ</title>
		<link>https://www.usedpartsvendor.com/cooling-heating-climate/servo-motor-heating/c4-servo-motor-heating/servo-heater-behr-h1959-u-b-21-citroen-peugeot-ead512-6447rz-2/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Mon, 22 Apr 2024 04:05:41 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/servo-heater-behr-h1959-u-b-21-citroen-peugeot-ead512-6447rz-2/</guid>

					<description><![CDATA[Stellantis Citroën Peugeot
6447RF EAD512 H1959 U b 21]]></description>
										<content:encoded><![CDATA[<p>Heater Servo Motor for Citroën C4 and Peugeot 307 II</p>
<h3>Description</h3>
<p>This replacement heater servo motor (HVAC actuator) is designed for Citroën C4 and Peugeot 307 II climate systems. Supplied with common manufacturer and aftermarket references (Behr / EAD512 / 6447RF / 6447RZ / H1959), the unit drives the internal flaps that control airflow direction and temperature mixing inside the dashboard. The part is often searched by its product codes, so listing OE and reference numbers helps mechanics and DIY enthusiasts find the correct item quickly.</p>
<h3>Application And Function</h3>
<p>The servo motor operates the blend/mode flaps in the heater and ventilation box, enabling correct distribution of warm or cold air to the cabin (footwell, face vents, windshield) and mixing of hot/cold air to achieve set temperatures. Proper operation is essential for climate comfort and windshield demisting. Typical fitment vehicles: Citroën C4 and Peugeot 307 II (verify part number compatibility with your vehicle’s listed codes).</p>
<h3>Symptoms Of Failure</h3>
<ul>
<li>Clicking or knocking noises from the dashboard when changing HVAC settings.</li>
<li>No airflow from selected vents or inability to change vent mode.</li>
<li>Incorrect cabin temperature due to failed blend control.</li>
<li>Intermittent operation or complete loss of actuator movement.</li>
</ul>
<h3>Recommended Installation</h3>
<p>Installation is straightforward for a trained mechanic but typically requires partial dashboard access. Typical procedure:</p>
<ul>
<li>Disconnect the battery before starting to avoid short circuits and protect vehicle electronics.</li>
<li>Access the actuator by removing glovebox or lower dash panels as required for your model.</li>
<li>Unplug the electrical connector and remove the mounting screws holding the old servo motor.</li>
<li>Fit the new unit in the same orientation, secure with screws, and reconnect the connector.</li>
<li>Reinstall trim panels and reconnect the battery. Cycle the HVAC controls through full range to allow the mechanism to settle; if required, perform an actuator calibration or adaptation using diagnostic equipment.</li>
</ul>
<p>For workshop technicians: if the HVAC system does not return to correct operation after mechanical replacement, perform an adaptation procedure with a compatible diagnostic tool. Follow manufacturer removal/installation sequences to avoid damaging plastic gears or cables.</p>
<h3>Why The Part Most Often Fails</h3>
<ul>
<li>Plastic Gear Wear Or Breakage: Internal plastic gears can wear or snap over time, causing loss of movement or noisy operation.</li>
<li>Motor Burnout Or Electrical Faults: Motor windings or electronics may fail due to age or voltage spikes.</li>
<li>Contamination And Moisture: Dust, debris, or moisture ingress can seize gearing or corrode connectors.</li>
<li>Mechanical Strain: Stiff or obstructed flap mechanisms increase load on the servo and accelerate wear.</li>
</ul>
<h3>Technical Information</h3>
<ul>
<li><strong>Manufacturer:</strong> Behr</li>
<li><strong>Model:</strong> Citroën C4; Peugeot 307 II</li>
<li><strong>Product Codes:</strong> 6447RF; 6447RZ; H1959; EAD512</li>
<li><strong>Additional Numbers:</strong> H1959 U b 21; EAD512 6447RF</li>
</ul>
<h3>Notes For Buyers</h3>
<p>This servo motor is commonly searched by its reference numbers—listing these codes in your search will increase the chance of finding the correct unit. Suitable for technicians and skilled DIYers comfortable with dashboard disassembly. Always follow safety procedures and vehicle-specific instructions during replacement.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Heater Servo Motor BEHR H1959 U b 13 Citroën Peugeot EAD512 6447RZ</title>
		<link>https://www.usedpartsvendor.com/cooling-heating-climate/servo-motor-heating/c4-servo-motor-heating/servo-heater-behr-h1959-u-b-13-citroen-peugeot-ead512-6447rz-2/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Sat, 17 Feb 2024 05:40:04 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/servo-heater-behr-h1959-u-b-13-citroen-peugeot-ead512-6447rz-2/</guid>

					<description><![CDATA[Stellantis Citroën Peugeot
6447RF EAD512 H1959 U b 13]]></description>
										<content:encoded><![CDATA[<p>Heater servo motor for Citroën C4 and Peugeot 307 II vehicles.</p>
<p>Replace a worn or malfunctioning HVAC actuator with this Behr heater servo motor designed for Citroën C4 and Peugeot 307 II applications. Built to restore precise control of temperature and airflow direction, this actuator is a practical choice for professional workshops and DIY mechanics who need a reliable, direct-fit replacement. The unit matches common part cross-references (H1959, EAD512, 6447RF/6447RZ) and is suitable where the original actuator has failed to move blend or distribution flaps, is noisy, or reports incorrect temperature control.</p>
<h3>Technical Information</h3>
<ul>
<li><strong>Manufacturer:</strong> BEHR</li>
<li><strong>Model:</strong> Citroën C4; Peugeot 307 II</li>
<li><strong>Product Codes:</strong> H1959, EAD512</li>
<li><strong>Other Numbers:</strong> 6447RF, 6447RZ, U b 13</li>
</ul>
<h3>Compatibility</h3>
<p>Intended For: Citroën C4 and Peugeot 307 II models (Stellantis group). Always check the part number used on the original actuator to confirm match with the vehicle fitment list.</p>
<h3>Function And Benefits</h3>
<p>The heater servo motor (actuator) drives the internal HVAC flaps that regulate temperature blend and airflow distribution. A correctly functioning actuator provides:</p>
<ul>
<li>Accurate cabin temperature control</li>
<li>Quiet and smooth flap movement</li>
<li>Reliable repeatability during climate mode changes</li>
</ul>
<h3>How The Part Is Replaced (Basic Guide)</h3>
<p>Typical replacement procedure for passenger-compartment HVAC actuators (general guidance for experienced mechanics):</p>
<ul>
<li>Disconnect the vehicle battery before starting work.</li>
<li>Access the actuator from the passenger side—often behind or below the glovebox. Remove trim or the glovebox as required.</li>
<li>Locate and unplug the electrical connector, then remove the mounting screws securing the actuator to the heater box.</li>
<li>Compare the new unit with the old one for matching splines and connector orientation, install the replacement, refit screws and connector.</li>
<li>Reconnect the battery and run the climate control through its modes to verify correct movement and calibration. If required, cycle the system to allow the actuator to find end stops.</li>
</ul>
<h3>Installation Recommendations</h3>
<ul>
<li>Work Should Be Performed By Someone With Basic HVAC/Dashboard Experience: Removing trim and accessing the heater box requires care to avoid damage to clips and surrounding components.</li>
<li>Always Disconnect The Battery Before Removal To Reduce Risk Of Electrical Damage.</li>
<li>Inspect Surrounding Gears And Linkages For Damage Or Debris And Clean The Area Before Installing The New Actuator.</li>
<li>After Installation, Verify Full Range Of Motion At Different Climate Settings And Listen For Unusual Noises.</li>
</ul>
<h3>Why This Part Most Often Fails</h3>
<ul>
<li>Plastic Gear Wear Or Stripping: Repeated cycling over years commonly causes teeth to wear or strip, producing loss of movement or rattling noises.</li>
<li>Motor Burnout: Internal motor windings can fail after long service life or excessive load.</li>
<li>Electrical Connector Corrosion Or Wiring Faults: Moisture ingress or connector damage can interrupt power or signals.</li>
<li>Debris Or Mechanical Obstruction In HVAC Box: Foreign objects can jam flaps and overload the actuator.</li>
<li>Thermal And Ageing Effects: Heat cycles and long-term exposure reduce plastic and electronic component lifespan.</li>
</ul>
<p>For technicians: replacing the actuator and checking the HVAC system for proper operation typically resolves temperature control and flap movement issues. This unit is aimed at restoring reliable climate control performance in affected Citroën C4 and Peugeot 307 II vehicles.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Heater Servo Motor BEHR H1959 U B 44 Citroën Peugeot EAD512 6447RZ</title>
		<link>https://www.usedpartsvendor.com/cooling-heating-climate/servo-motor-heating/c4-servo-motor-heating/servo-heater-behr-h1959-u-b-44-citroen-peugeot-ead512-6447rz-2/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Wed, 18 Oct 2023 04:23:03 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/servo-heater-behr-h1959-u-b-44-citroen-peugeot-ead512-6447rz-2/</guid>

					<description><![CDATA[Stellantis Citroën Peugeot
6447RF EAD512 H1959 U b 44]]></description>
										<content:encoded><![CDATA[<p>Servo heater motor for CITROËN C4 and PEUGEOT 307 II. Climate control motor-reducer BEHR</p>
<p>High-quality replacement heater servo motor designed for Citroën C4 and Peugeot 307 II HVAC systems. This Behr motor-reducer restores accurate flap and temperature control in the climate system, eliminating common symptoms such as stuck flaps, incorrect cabin temperature or noisy operation. Ideal for professional technicians and experienced DIY mechanics who search by part number (for example EAD512, H1959, 6447RZ) to find a direct-fit solution for the HVAC box.</p>
<h3>Key Features</h3>
<ul>
<li>Direct Fit For Citroën C4 And Peugeot 307 II HVAC Units</li>
<li>Behr Motor-Reducer Designed For Smooth Flap Control</li>
<li>Restores Proper Airflow Distribution And Temperature Regulation</li>
<li>Often Searched By Product Codes: EAD512, H1959, 6447RZ, 6447RF</li>
<li>Suitable For Garage Repairs And DIY Climate System Overhauls</li>
</ul>
<h3>Technical Information</h3>
<ul>
<li>Manufacturer: Behr</li>
<li>Model: Citroën C4 / Peugeot 307 II</li>
<li>Product Codes: EAD512, H1959</li>
<li>Other Numbers: 6447RZ, 6447RF</li>
</ul>
<h3>Installation Recommendations</h3>
<p>Before starting, always disconnect the battery and follow the vehicle manufacturer&#8217;s safety procedures. Typical replacement steps:</p>
<ol>
<li>Remove necessary trim or glovebox to access the HVAC housing (location varies by model).</li>
<li>Disconnect the electrical connector to the servo motor and note any connector orientation.</li>
<li>Remove the fixing screws or clips securing the motor to the HVAC unit and extract the actuator.</li>
<li>Fit the new motor, ensuring correct spline engagement with the flap shaft and secure fasteners.</li>
<li>Reconnect the electrical plug, reassemble trim, reconnect the battery and perform a function test by cycling the climate controls through all modes.</li>
</ol>
<p>Use appropriate hand tools (commonly Torx or Phillips) and avoid forcing splines or plastic gears. After installation, verify correct flap travel and recalibrate the system if required by the vehicle procedure (cycle through full HVAC modes to allow automatic calibration).</p>
<h3>Why It Typically Fails</h3>
<ul>
<li>Mechanical Wear: Plastic gears and splines can wear or strip over time, causing slippage or loss of movement.</li>
<li>Electrical Wear: Internal motor brushes or potentiometers may degrade, leading to intermittent or no operation.</li>
<li>Moisture And Corrosion: Water ingress or condensation can corrode connectors and internal components.</li>
<li>Overload And Jamming: Foreign debris in the HVAC box or seized flaps increase load and accelerate failure.</li>
</ul>
<p>Replacing the servo motor is an effective way to restore reliable climate control operation. Check the actuator mounting, wiring and fuses before replacement to avoid repeat failures. This part is a practical choice for workshops and competent DIYers looking to repair Citroën C4 and Peugeot 307 II heating and ventilation faults quickly and cost-effectively.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Heater Servo Motor BEHR H1959 U Citroën Peugeot EAD512 6447RZ</title>
		<link>https://www.usedpartsvendor.com/cooling-heating-climate/servo-motor-heating/c4-servo-motor-heating/servo-heater-behr-h1959-u-b-41-citroen-peugeot-ead512-6447rz-2/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Sat, 14 Oct 2023 04:24:02 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/servo-heater-behr-h1959-u-b-41-citroen-peugeot-ead512-6447rz-2/</guid>

					<description><![CDATA[Stellantis Citroën Peugeot
6447RF EAD512 H1959 U b 41, H1959 U b 43]]></description>
										<content:encoded><![CDATA[<p>Heating servo motor for Citroën C4 and Peugeot 307 II. Version H1959 U b 41 or H1959 U b 43</p>
<p>High-quality replacement heater/airbox servo motor designed for Citroën C4 and Peugeot 307 II HVAC systems. This actuator drives the blend and distribution flaps inside the heater box to control cabin temperature and airflow direction. The unit is suitable for professional workshops and skilled DIYers who frequently search by part number (e.g. EAD512, 6447RZ, H1959) to ensure fast identification and fitment.</p>
<h3>Key Features</h3>
<p>Reliable electric servo motor for precise flap control, ensuring correct temperature mixing and air distribution. Compact design for direct replacement of original equipment on compatible Stellantis models. Useful for resolving intermittent climate control faults such as stuck flaps, incorrect temperature regulation, or noise from the heater box.</p>
<h3>Technical Information</h3>
<ul>
<li><strong>Manufacturer:</strong> Behr</li>
<li><strong>Model:</strong> Citroën C4; Peugeot 307 II</li>
<li><strong>Product Codes:</strong> EAD512, 6447RZ, 6447RF, H1959</li>
<li><strong>Additional Numbers:</strong> H1959 U b 41, H1959 U b 43</li>
</ul>
<h3>Function</h3>
<p>The servo motor actuates the heater box flaps (blend and/or distribution flaps) to mix hot and cold air and direct it to the windshield, face or footwell outlets. Proper operation is essential for temperature regulation, defogging functions and comfort settings in manual or automatic climate control systems.</p>
<h3>Typical Failure Modes</h3>
<p>Most common causes of failure include worn or stripped plastic gear teeth, motor bearing wear, internal potentiometer degradation, electrical connector corrosion or water ingress from leaks in the heater box. Symptoms are usually: unusual clicking or grinding noises, inability to change airflow direction or temperature, or the climate control system showing error codes related to flap position.</p>
<h3>Replacement Interval</h3>
<p>There is no strict manufacturer interval for servo motor replacement. Lifespan depends on usage, climate and mechanical wear. Units commonly begin to fail after several years or after high mileage when plastic gears and small electric motors have been heavily used.</p>
<h3>Installation Recommendations</h3>
<ul>
<li>Always disconnect the vehicle battery before starting work to avoid short circuits and to protect electronic components.</li>
<li>Remove necessary trim panels, glovebox or center console pieces to access the heater box actuator—access procedure depends on vehicle model and year.</li>
<li>Unplug the electrical connector and remove the fixing screws/clips. Note flap positions or mark linkages to ensure correct reassembly.</li>
<li>Fit the replacement unit ensuring correct spline alignment with the flap shaft; do not force gears. Reattach screws/clips and reconnect the electrical connector.</li>
<li>Reconnect the battery and cycle the HVAC controls through all modes to verify smooth flap operation and correct temperature control before refitting trim.</li>
<li>Use basic workshop tools and trim tools; if you are unsure about disassembly steps for a specific model year, consult a workshop manual or technical guide for Citroën/Peugeot HVAC layout.</li>
</ul>
<h3>Why This Part Most Often Fails</h3>
<p>Small plastic gears and the low-torque DC motor inside the servo are subject to mechanical wear and can crack or strip. Moisture entering the heater box accelerates corrosion and gear damage. Frequent heavy use (rapid temperature changes, repeated flap movements) and debris in the HVAC system also increase failure risk.</p>
<h3>Compatibility And Fitment Notes</h3>
<p>This servo motor is intended for vehicles listed above and is commonly referenced by the codes shown in the Technical Information section. Always compare the part number on the original actuator with the product codes to confirm correct fitment.</p>
<h3>Useful Tips For Diagnosis</h3>
<ul>
<li>Listen for consistent motor movement or grinding noises when changing vent or temperature settings.</li>
<li>Check for fault codes with a diagnostic scanner related to HVAC actuator position sensors.</li>
<li>Inspect the heater box for signs of water ingress or debris that could obstruct flap movement.</li>
</ul>
<h3>Tools And Skills</h3>
<p>Recommended for professional mechanics and confident DIYers. Required tools typically include common screwdrivers, trim removal tools and basic socket/ratchet sets. No special coding is normally required for a standard heater servo motor replacement.</p>
]]></content:encoded>
					
		
		
			</item>
		<item>
		<title>Heater Servo BEHR H1959 U b 42 Citroën Peugeot EAD512 6447RZ</title>
		<link>https://www.usedpartsvendor.com/cooling-heating-climate/servo-motor-heating/c4-servo-motor-heating/servo-heater-behr-h1959-u-b-42-citroen-peugeot-ead512-6447rz/</link>
		
		<dc:creator><![CDATA[]]></dc:creator>
		<pubDate>Wed, 11 Oct 2023 04:23:04 +0000</pubDate>
				<guid isPermaLink="false">https://www.usedpartsvendor.com/uncategorized/servo-heater-behr-h1959-u-b-42-citroen-peugeot-ead512-6447rz/</guid>

					<description><![CDATA[Stellantis Citroën Peugeot
6447RF EAD512 H1959 U b 42]]></description>
										<content:encoded><![CDATA[<p>Heating servo motor for CITROËN C4 and PEUGEOT 307 II<br />BEHR air conditioning actuator</p>
<p>The BEHR heating servo motor (heater actuator) is a direct replacement part for the climate control system on Citroën C4 and Peugeot 307 II models. Designed to control flaps and blend doors inside the HVAC box, this actuator restores precise temperature distribution and airflow direction when the original unit becomes noisy, intermittent or stops moving. Ideal for professional workshops and DIY mechanics, the unit fits OEM-style mounts and electrical connectors used on many Stellantis vehicles, making it a reliable option to solve common cabin comfort issues quickly.</p>
<h3>Technical Information</h3>
<ul>
<li>Manufacturer: BEHR</li>
<li>Model: Citroën C4, Peugeot 307 II</li>
<li>Product Codes: EAD512</li>
<li>Additional Numbers: 6447RF, 6447RZ, H1959, U b 42</li>
</ul>
<h3>Function And Application</h3>
<p>The servo motor operates the HVAC blend door or distribution flaps inside the heater box, translating electrical commands from the climate control unit into precise mechanical movement. Proper function is essential for correct cabin temperature regulation, defogging and directing airflow to vents, feet or windshield.</p>
<h3>Symptoms Of A Faulty Unit</h3>
<ul>
<li>Clicking or grinding noises from the dash area when changing temperature or vent settings.</li>
<li>No change in cabin temperature despite adjusting controls (stuck at hot or cold).</li>
<li>Airflow directed incorrectly or not switching between vents/defrost modes.</li>
<li>Intermittent operation or complete electrical failure of the actuator.</li>
</ul>
<h3>Replacement Procedure (Overview)</h3>
<p>Typical replacement is straightforward for a trained technician or a competent DIY mechanic. Procedures vary slightly by vehicle, but common steps include:</p>
<ul>
<li>Disconnect The Battery Before Starting Work To Avoid Short Circuits Or Unintended Airbag/Body Control Issues.</li>
<li>Access The HVAC Box—Often Through The Glovebox Or Lower Dash Panel—Removing Trim Fasteners As Needed.</li>
<li>Locate The Servo Motor On The Heater Box, Carefully Unplug The Electrical Connector And Remove The Fixing Screws.</li>
<li>Fit The Replacement Unit, Reattach Screws And Connector, Reassemble Trim, And Reconnect The Battery.</li>
<li>Check Operation By Cycling The Climate Controls Through Modes And Temperatures To Ensure Flaps Move Smoothly.</li>
</ul>
<h3>Installation Recommendations</h3>
<ul>
<li>Always Disconnect The Battery Before Starting Work.</li>
<li>Inspect Surrounding HVAC Components For Broken Plastic Gears, Debris Or Signs Of Moisture That Could Cause Repeat Failures.</li>
<li>When Reinstalling, Ensure The Actuator Is Correctly Seated To The Flap Shaft And That Mounting Screws Are Secure But Not Over-Torqued.</li>
<li>After Installation, Run A Full Function Test (All Modes And Temperatures) To Confirm Proper Calibration And Movement.</li>
<li>If Intermittent Electrical Faults Persist, Check Wiring And Connector Contacts For Corrosion Or Damaged Pins.</li>
</ul>
<h3>Why This Part Most Often Fails</h3>
<p>Heater actuators commonly fail due to worn plastic gears, internal motor wear, or contamination by dust and moisture in the HVAC box. Repeated thermal cycling and frequent flap movement over many years accelerates gear degradation. Symptoms typically begin with clicking noises and progress to complete loss of flap movement. In some cases, electrical faults such as damaged connector pins or intermittent motor windings cause failure.</p>
<h3>Why Choose This Unit</h3>
<p>Choosing a direct-fit BEHR actuator provides a cost-effective repair that restores climate control functionality and driving comfort. The part is suited for professional garages and skilled DIYers who want a reliable OEM-style replacement for Citroën C4 and Peugeot 307 II HVAC problems.</p>
]]></content:encoded>
					
		
		
			</item>
	</channel>
</rss>
