This rear lamp bulb socket with a short wiring tail is a direct replacement part for Citroën C3 models manufactured until 2009. It addresses common lamp faults caused by corroded contacts, broken lampholders or damaged wiring, restoring reliable electrical connection for stop, tail and indicator functions. Ideal for professional workshops and experienced DIY mechanics who search by part number 6350Q3 / 6351Q3 / 6350X5 / 6351X5.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C3 (models up to 2009)
• Product Codes: 6350Q3, 6351Q3, 6350X5, 6351X5
• Additional Numbers: 6350Q3 | 6350X5 | 6351Q3 | 6351X5 | Citroën C3

Function and Application

The part houses the bulb sockets for the rear lamp cluster (left and right) and includes a short length of wiring to connect the lamp module to the vehicle harness. It provides electrical contacts for standard filament bulbs used in tail, brake and indicator circuits. This assembly replaces worn or damaged lampholders and short sections of harness that cause intermittent lighting or open circuits in the rear lights.

How To Replace

• Disconnect Battery Before Work To Prevent Short Circuits.
• Remove Rear Light Assembly: Open boot, remove retaining screws/clips and gently pull the lamp unit out to access the sockets.
• Extract Old Socket: Turn or unclip the old socket from the lamp housing and unplug the connector from the vehicle wiring harness.
• Install New Socket: Fit the new socket into the lamp housing, secure clips or twist into position and connect the wiring tail to the vehicle connector.
• Test Lighting Functions: Reconnect Battery and verify Tail, Brake and Indicator lights operate correctly before reassembling.
• Reassemble Lamp Unit: Reinstall the lamp assembly and tighten fasteners to manufacturer torque where specified.

Installation Recommendations

• Use Dielectric Grease On Contacts To Reduce Corrosion And Improve Long-Term Reliability.
• When Replacing, Inspect Bulbs And Lamp Seals; Replace Any Failed Bulbs And Renew Damaged Seals To Prevent Water Ingress.
• Ensure Connectors Are Clean And Free Of Corrosion; Repair Loom Insulation If Fraying Or Damage Is Present.
• If You Encounter Wiring Damage Beyond The Short Tail, Repair The Wiring Harness With Proper Automotive-Grade Materials.

Why The Part Commonly Fails

Rear lamp sockets fail most often due to moisture ingress and corrosion of the contacts, prolonged heat cycling from filament bulbs, mechanical vibration and brittle plastic after years of service. Water entering the lamp housing accelerates corrosion and can cause intermittent or complete loss of lighting. Damaged wiring insulation or connector pins are also frequent causes of failure.

This replacement socket is a straightforward, cost-effective repair to restore rear lamp functionality on affected Citroën C3 vehicles. Order by the referenced product codes to ensure you receive the correct lampholder assembly for your application.

Used rear lamp bulb holder designed for the Citroën C3 (first generation). This replacement socket accepts the standard rear lamp bulbs and is suitable for both left and right lamp assemblies. It is a practical spare for workshops and DIY mechanics who need to restore lighting functions such as tail, stop, indicator or reverse light (depending on the lamp variant). The item is commonly referenced by product codes and part numbers, so searching by code can speed up finding the correct replacement.

Technical Information

• Manufacturer: Stellantis / Citroën
• Model: Citroën C3 (up to 2009)
• Product Codes: 6350Q3, 6351Q3, 6350X5, 6351X5
• Additional Numbers: Not specified

Function

The socket secures and provides electrical contact for the rear lamp bulbs. Depending on the lamp cluster configuration, it serves tail light, stop light (brake), turn signal (indicator) and/or reverse light functions. Proper seating and contact integrity are essential for reliable illumination and signal transmission.

How To Replace

1. Switch off ignition and all exterior lights before starting. 2. Open the boot and access the rear lamp from inside the luggage compartment—remove cover panels or trim as required. 3. Unscrew or unclip the lamp assembly and pull it out gently. 4. Unplug the wiring connector from the lamp and release the bulb holder/socket from the lamp housing. 5. Replace the old socket with the new one, ensuring bulbs are correctly seated and contacts are clean. 6. Reconnect the wiring connector, refit the lamp assembly and secure all fasteners and trim. 7. Test all lamp functions (tail, brake, indicator, reverse) before finishing reassembly.

Installation Recommendations

Wear gloves to avoid contaminating bulb glass. Inspect wiring plugs and contacts for corrosion or damaged insulation and clean contacts if necessary. Use dielectric grease on connectors to improve moisture resistance. Verify bulb types and orientation before refitting. If multiple lamp functions fail, check the vehicle fuse and ground connections as well.

Why This Part Commonly Fails

Common causes of failure include corrosion from moisture ingress, overheating of bulbs causing melted or brittle plastic, vibration fatigue, and UV degradation over time. Poor contact due to oxidized terminals or damaged wiring can lead to intermittent or complete loss of lamp function. Regular inspection and addressing moisture entry points in the lamp housing help extend service life.

Compatibility And Search Tips

Many customers search by the product codes shown above (6350Q3, 6351Q3, 6350X5, 6351X5) or by the vehicle model Citroën C3. Use these codes when looking for matching parts to ensure correct fitment.

Product Overview

High-quality original replacement right rear taillight designed for Citroën C3 models since 2005. The unit houses stop, tail and turn signal functions (verify exact bulb configuration for your vehicle). OE-fit mounting points ensure correct alignment with the bodywork for a clean finish and reliable fixation.

Compatibility And Function

This assembly is intended for the right rear position (passenger side on left-hand drive vehicles) of Citroën C3 models from 2005. It performs essential rear-lighting functions including brake light, rear position light and indicator. The lamp is often searched by product code 6351X5. Note: Bulb holders/sockets are not included and must be sourced separately.

Replacement Procedure

Typical replacement steps: open the boot and remove the inner trim to access the lamp fasteners; remove screws or nuts securing the lamp; gently pull the lamp assembly outward and disconnect the wiring connector; fit the new lamp, reconnect the wiring and secure the fasteners; refit trim and test all light functions (brake, tail and indicator). Work carefully to avoid damaging paint or trim clips. For vehicles with sealed or glued units follow manufacturer-specific disassembly instructions.

Most Common Failure Causes

• Impact Damage: Minor collisions or parking knocks often crack the lens or break mounting tabs.
• Water Ingress: Degraded seals or hairline cracks allow moisture, causing bulb socket corrosion and electrical faults.
• Connector Corrosion: Oxidation on pins and sockets leads to intermittent operation or complete loss of function.
• Age And Vibration: Repeated stress can fracture clips, fasteners or internal mounts over time.

Installation Recommendations

Before installation inspect wiring, connector pins and bulb holders for corrosion. Replace worn or corroded bulb sockets and seals to prevent future water ingress. Use the correct bulb types and wattages as specified for your model. Align the lamp accurately and tighten fasteners to the correct torque—avoid overtightening to prevent housing damage. After fitting, verify all light functions and adjust if necessary.

Technical Information

• Manufacturer: Citroën (Stellantis)
• Model: Citroën C3 (from 2005)
• Product Codes: 6351X5
• Other Numbers: Not Specified

Notes For Mechanics And DIYers

Designed for professional fitment but suitable for experienced DIY repairs. The part provides OE fit and finish, making it a reliable choice for repair shops and home mechanics replacing a damaged right rear lamp. Frequently searched under code 6351X5—keep this number handy when ordering replacement bulb holders or related accessories.