Overview

High-quality replacement right rear tail light designed for the tailgate of the Peugeot 607. This original-style unit restores rear lighting functions including tail/position, brake and indicator (function depends on vehicle wiring and bulb configuration). Ideal for professional garages and DIY mechanics looking for a direct-fit part identified by product code 6351N2.

Benefits

• Direct Fit For Peugeot 607 Tailgate—Easy Replacement To Restore Exterior Lighting And Safety.
• Original-Style Construction For Correct Shape, Mounting Points And Optical Performance.
• Part Number Search Friendly: Frequently Found Under Code 6351N2.
• Bulb Holder Not Included—Option To Order Separately Under Code 6534GT.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 607
• Product Codes: 6351N2
• Additional Numbers: 6534GT (Bulb Holder)

Compatibility

This unit Is Intended For The Right Side (Passenger Side) Tailgate Of The Peugeot 607. Confirm Fitment By Matching The Part Number 6351N2 With Your Existing Unit.

Replacement Procedure

Basic Steps For Replacement (General Guide For Experienced Mechanics And Competent DIYers):

• Disconnect The Battery Before Starting Work To Avoid Short Circuits Or Damage.
• Open The Tailgate And Remove Interior Trim Panels To Access The Light Mounting Screws.
• Unscrew The Mounting Fasteners And Carefully Pull The Light Assembly Out Of The Tailgate.
• Unplug The Electrical Connector And Remove The Bulb Holder If Present (Note: This Unit Is Supplied Without Bulb Holder; Order Code 6534GT If Required).
• Fit The New Assembly, Reconnect The Electrical Connector, And Secure The Mounting Screws.
• Reconnect The Battery And Verify All Light Functions (Tail, Brake, Indicator, Reverse As Applicable).
• Refit The Interior Trim Panels And Check Seals To Prevent Water Ingress.

Mounting Recommendations

• Use Correct Tools And Appropriate Torque For Fasteners To Avoid Cracking The Lens Or Stripping Threads.
• Replace The Bulb Holder If It Shows Signs Of Corrosion Or Wear; The Assembly Is Supplied Without The Holder.
• Inspect Seals And Gaskets; Replace Damaged Seals To Prevent Moisture Entry.
• Test All Functions After Installation And Ensure Proper Alignment To Avoid Reduced Visibility.

Why This Part Fails Most Often

Common Causes Of Failure Include:

• Impact Damage From Minor Collisions Or Loading/Unloading The Tailgate.
• Water Ingress Due To Worn Seals Or Cracked Lens, Leading To Corrosion Or Electrical Faults.
• Connector Or Bulb Socket Corrosion Resulting In Intermittent Contact.
• Aging And UV Degradation Of The Lens Causing Cracks Or Clouding.
• Burnt Bulbs Or Faulty Wiring (Note: Bulbs And Bulb Holder May Need Separate Replacement).

Notes

Part Number 6351N2 Is The Primary Identifier For This Right Rear Tail Light. Bulb Holder Is Not Included; Use Code 6534GT If A Replacement Holder Is Required. Suitable For Professional Workshops And Knowledgeable DIY Enthusiasts.