High-quality replacement right rear lamp designed for Peugeot 207 (3-door and 5-door) vehicles equipped with LED rear lighting from 2010. Ideal for professional workshops and DIY mechanics who search by product code — commonly listed under 9686565980 or 6351HQ. The lamp restores full rear lighting function and original appearance, ensuring clear signaling and safe night-time visibility.

Compatibility

Fits: PEUGEOT 207 (3-Door, 5-Door) — Passenger Side. Intended for models from 2010 fitted with LED rear light assemblies.

Technical Information

• Manufacturer: Stellantis (PEUGEOT/CITROËN)
• Model: PEUGEOT 207 (3-Door, 5-Door)
• Product Codes: 9686565980, 6351HQ
• Additional Numbers: 6351HQ, 9686565980

Function And Features

This assembly provides tail, brake, and indicator lighting functions using integrated LED technology (for supported model years). LEDs deliver quick response times for signalling and generally longer service life compared with filament bulbs. The unit is designed to match factory mounting points and electrical connectors for straightforward replacement.

How To Replace

• Open the tailgate/boot and remove any interior trim or access panel covering the lamp fixing nuts.
• Unscrew the retaining nuts or bolts and withdraw the lamp assembly from the bodywork.
• Disconnect the electrical connector carefully — avoid pulling on wires.
• Install the new lamp into the body aperture, reconnect the connector and secure the fasteners evenly.
• Reinstall trim panels and test all lamp functions (tail, brake, indicator, and reverse if applicable) before finishing.

Installation Recommendations

• Always disconnect the battery before starting work to avoid short circuits and to protect vehicle electronics.
• Check connector pins for corrosion or damage and clean or replace as necessary for reliable contact.
• Use correct fastener torque and ensure sealing surfaces are clean to prevent water ingress.
• After installation, verify all light functions from inside the vehicle and during a short road test.

Why This Part Most Often Fails

LED rear lamp assemblies are generally durable, but common failure causes include water ingress through damaged seals or cracked lenses, physical impact or collision damage to the lamp housing, connector corrosion, and wiring faults. Thermal cycling and poor sealing after previous repairs can also lead to premature LED or circuit failure.

Searching by product number (9686565980 / 6351HQ) is common among mechanics and parts departments — this listing helps you find the correct right rear LED lamp for Peugeot 207 quickly and confidently.

Product Overview

This replacement bulb socket is designed for the right rear lamp of the Peugeot 207 (3‑door and 5‑door) from 2010 that are equipped with LED rear lighting. It secures the bulb or lamp insert in the lamp housing and provides the electrical contact necessary for proper operation. The part is commonly searched by its product codes and is intended for professional fitters and competent DIY mechanics who maintain or repair Peugeot lighting assemblies.

Features And Benefits

• Direct Fit For Right Rear Lamp On Passenger Side.
• Compatible With LED-Equipped Rear Light Assemblies (From 2010 Models).
• Robust Contact Points To Ensure Reliable Electrical Connection.
• Helps Prevent Intermittent Contact And Flicker When Installed Correctly.
• Often Searched By Product Codes For Fast Identification.

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 207 (3-Door And 5-Door), Passenger Side, Right Rear Lamp
• Product Codes: 9686565980, 6351HQ
• Other Numbers: 6351HQ | 9686565980

Fitment And Compatibility

This socket fits Peugeot 207 models (3 and 5 doors) from 2010 equipped with LED rear lighting, for the right rear lamp on the passenger side. Customers frequently search using the OEM numbers 9686565980 and 6351HQ to find the correct part quickly.

Replacement Procedure

Intended For Experienced Mechanics And Confident DIY Users. Typical replacement steps:

• Park The Vehicle On A Level Surface And Switch Off Ignition.
• Disconnect The Negative Battery Terminal If You Prefer Additional Safety.
• Open The Tailgate/Boot And Remove Any Interior Trim Or Fasteners Blocking Access To The Taillight Assembly.
• Unscrew Or Release The Taillight Fasteners, Carefully Pull The Lamp Assembly Outwards To Access The Socket.
• Release The Old Socket From The Lamp Housing, Unplug The Electrical Connector And Remove Any Retained Bulb.
• Install The New Socket In Reverse Order, Ensure Correct Orientation And Secure Retention Clips/Screws.
• Reconnect The Electrical Connector, Refit The Lamp Assembly And Interior Trim, Then Test All Rear Light Functions (Brake, Tail, Indicator, Reverse As Applicable).

Recommendations For Installation

• Use Contact Cleaner To Remove Corrosion From Connectors Before Fitting The New Socket.
• Apply A Thin Layer Of Dielectric Grease On Metal Contacts To Reduce Future Corrosion And Improve Longevity.
• Avoid Excessive Force When Seating The Socket; Ensure Clips And Seals Are Intact To Prevent Water Ingress.
• Check Lamp Housing Seals And Replace Damaged Gaskets To Prevent Moisture-Related Failures.
• After Reassembly, Verify Functionality Of All Rear Lights On A Test Drive Or With Assistance.

Why This Part Commonly Fails

• Corrosion Of Electrical Contacts Due To Moisture Or Damaged Seals Leading To Intermittent Or Failed Contact.
• Wear From Repeated Bulb Changes Causing Loose Fit Or Broken Retention Tabs.
• Heat Cycling Around The Lamp Area Gradually Degrading Plastic And Contacts.
• Mechanical Damage From Impacts Or Improper Removal/Installation Of The Taillight Assembly.

Notes

Do not assume universal interchangeability. Use The Provided Product Codes (9686565980, 6351HQ) To Confirm Correct Fitment For The Specific Peugeot 207 Variant. Proper preparation, cleaning Of Contacts, And Attention To Seals Will Significantly Extend The Service Life Of The Replacement Socket.