Original bulb socket (bulb holder) for the right rear lamp of the first generation Peugeot 3008. The parts with the codes 9683460780 and 6351HC are intended for the 3008 I model (T84, production approx. 2009–2016) and serve as a light bulb carrier and a conductive connection of the individual light functions. A great choice if the rear light is annoying due to broken contacts or heated surfaces.

The socket ensures the correct operation of the turn signal, marker and brake light and reversing light (specific fitting depending on the car’s equipment). Typical signs of a defect are a non-functioning blinker, an error message on the dashboard, brightness fluctuations or complete lights outages. The cause is usually oxidation of the contacts, ingress of moisture into the lamp or local overheating. Replacing the base is a quick and efficient solution without having to change the entire lamp.

Installation is simple and manageable even at home: open the fifth door, remove the inner cover, loosen the lamp’s plastic nuts/screws, disconnect the connector and remove the light from the body. The base is secured in the lamp with latches or screws – loosen it, transfer or replace the bulbs and put everything back together. Common bulb types for this socket are P21W, PY21W and P21/5W (varies by equipment). Before assembly, check the seal and the condition of the connector; test all light functions after assembly.

This piece is a used original part from the car, fully functional and suitable as a replacement for a damaged or oxidized socket. The original design guarantees a precise fit, correct current conduction and a long service life.

Technical information

• Manufacturer: PSA / OEM Peugeot
• Model: Peugeot 3008 I (T84), approx. 2009-2016, location: right rear lamp
• Product codes: 6351HC; 9683460780
• Other numbers: 6351.HC; 9683 460 780

To ensure compatibility, compare the listed codes with the original socket or verify by VIN. If you are looking for a Peugeot 3008 I “Right Tail Light – Bulb Holder” replacement, this is the right part for a quick and reliable repair.

Right rear light for Peugeot 3008 first generation (T84). Original PSA OE part, suitable as a replacement for a damaged or cracked lamp. It fits perfectly, retains the factory appearance and quality, and thanks to the matching OE numbers, the installation is without modifications. This is a used original part – an ideal solution for a quick and cost-effective repair.

The light is supplied without a bulb base – this can be purchased separately. Before ordering, we recommend comparing numbers 9683460780 and 6351HC with your original part, or checking the label directly on the old lamp.

Why choose original light:
– exact compatibility with Peugeot 3008 I without modification
– maintaining the correct lighting geometry and homologation
– better attachment and sealing resistance compared to non-original replacements

Typical defects and when to change the light:
The rear lamps of the 3008 often go off after a minor collision or due to prolonged exposure to moisture (fogging, corrosion of the contacts in the socket). Cracks in the cover or broken handles can lead to leaks and lighting malfunctions. Replacing the entire lamp is usually the fastest and most reliable solution.

Assembly – brief procedure:
– open the trunk lid and remove the inner cover near the light
– disconnect the electrical connector and loosen the fixing nuts/bolts (usually torx/10mm)
– carefully push the light outwards from the fender and fit the new piece
– fasten, connect the connector and test the lighting functions
The exchange is normally manageable by yourself in units of minutes.

Technical information

• Manufacturer: PSA / Peugeot (OE)
• Model: Peugeot 3008 I (first generation, T84), right rear side
• Product codes: 9683460780, 6351HC
• Other numbers: 96 834 607 80, 6351.HC

Compatibility and Verification
The part is intended for the Peugeot 3008 of the first generation. Before purchasing, always verify the match by VIN or by comparing the OE code (9683460780 / 6351HC) with the original part – this will ensure 100% compatibility.

Package contents
Right rear light (without bulb socket).