The Rear Left Lamp Socket is specifically designed for the Peugeot 406 4-door models. This part includes a section of wiring to enable seamless integration into your vehicle’s lighting system. It is essential for maintaining proper functionality of the rear lighting setup, although please note that the operation of the bulbs is not guaranteed.

Technical Information

• Manufacturer: PSA
• Model: Peugeot 406 4 Door
• Product Codes: 9630364877, 6350L5
• Additional Numbers: 634737

Replacement and Maintenance

This lamp socket can experience wear and tear over time due to exposure to the elements and consistent usage. Regular checks are advised to ensure optimal functioning of your vehicle’s lighting system. The replacement process typically involves disconnecting the old socket from the wiring and securing the new one in place. This is a straightforward task for both professional mechanics and DIY enthusiasts alike.

Functionality

The primary function of the rear left lamp socket is to securely hold the rear light bulb and ensure proper electrical connectivity. A faulty socket can lead to issues such as flickering lights or complete lighting failure, making timely replacement crucial. Ensure your Peugeot 406 remains roadworthy and visible by keeping the lamp socket in good condition.

The left rear lamp is essential for signaling and illuminating your vehicle’s rear, ensuring that other drivers can see your vehicle clearly at night or in poor weather conditions. If your original lamp is cracked, faded, or malfunctioning, replacing it with this part will restore your vehicle’s functionality and appearance.

Technical Information

• Manufacturer: Peugeot
• Model: 406 (4-door)
• Product Codes: 9630364877, 6350L5
• Additional Numbers: 634737

Routine inspections are recommended to ensure that all lighting elements on your vehicle are functioning properly, as rear lights can often fail due to weather exposure or wear and tear. Regularly replacing faulty lights will not only keep you safe but also comply with road safety regulations.

The lamp features a striking red color, coded EKQD, also known as Lucifer Red, which maintains the vehicle’s aesthetic while providing essential illumination. This part comes without a bulb holder, which can be purchased separately, offering flexibility in your repair process.

Replacing the Left Rear Lamp is a straightforward process. Begin by accessing the rear of the vehicle and removing the cover panel. Disconnect the wiring harness, unscrew the old lamp, and replace it with the new one. Ensure all connections are secure before reassembling the panel.

It’s advisable to replace rear lamps as soon as you notice any decrease in brightness or burnt-out bulbs, as faulty lamps can compromise safety on the road. Regular inspection is recommended to ensure all lighting functions optimally.

Technical Information

• Manufacturer: Peugeot
• Model: 406
• Product Codes: 9630364877, 6350L5
• Other Numbers: 634737

This left rear tail lamp is a direct-fit replacement for Peugeot 406 4-door models. Ideal for professional garages and DIY enthusiasts, the unit restores rear lighting functionality and vehicle appearance. Commonly searched by part numbers 9630364877 and 6350L5, this lamp is suitable when the original assembly is damaged, cracked, or suffering from water ingress. Bulb holders are not included, allowing you to reuse existing sockets or buy replacements separately.

Features and Function

• Left Rear Combination Lamp Assembly Designed For Peugeot 406 4-Door
• Includes Central Trim Strip (Color KMPD)
• Integrates Standard Rear Lighting Functions Depending On Vehicle Configuration (Tail, Brake, Turn Signal; Bulbs/Bulb Holders Not Included)
• Direct Replacement For Damaged Or Aged Rear Lamp Housings

Technical Information

• Manufacturer: Stellantis / Peugeot
• Model: Peugeot 406 (4-Door)
• Product Codes: 9630364877, 6350L5
• Additional Numbers: 634737

Fitment And Replacement

Replacement is straightforward for experienced mechanics or competent DIYers. Typical steps:

• Open the boot and remove the trim panels to access the lamp fixing screws.
• Unscrew mountings securing the lamp assembly and carefully withdraw the unit from the bodywork.
• Disconnect the electrical connector. If bulb holders are present and reusable, remove bulbs before detaching.
• Fit the new lamp assembly, reconnect the electrical connector, secure the fixing screws and refit trim panels.
• Install bulb holders and bulbs if required, then test all rear light functions (tail, brake, indicators, reverse/fog where applicable).

Installation Recommendations

• Work On A Cool, Dry Vehicle And Avoid Moisture During Installation.
• Disconnect The Battery Before Working On Electrical Connections To Reduce Risk Of Short Circuits.
• Use Correct Tools To Avoid Damaging Clips Or Trim. Keep Fasteners Safe For Reuse.
• Check And Replace Damaged Bulb Holders Or Corroded Connectors To Ensure Reliable Operation.
• After Installation, Verify All Lighting Functions From Outside The Vehicle; Replace Faulty Bulbs As Needed.

Common Reasons For Failure

• Impact Damage From Collisions Or Parking Accidents Leading To Cracked Housings.
• Water Ingress Through Damaged Seals Causing Corrosion Of Contacts Or Internal Fogging.
• Degraded Or Broken Bulb Holders And Connectors Resulting In Intermittent Or Non-Functional Lights.
• UV Exposure And Ageing Causing Housing Discoloration Or Brittleness.

Notes

This listing refers to the left rear lamp assembly only. Bulb holders are not included and may be ordered separately if required. Because many customers search using part numbers, the most relevant references are 9630364877 and 6350L5.

Engineered specifically for the Peugeot 406 model, this lamp fits seamlessly into your vehicle, ensuring a perfect fit and optimal performance. It is crucial to replace malfunctioning rear lamps, as they can affect your vehicle’s visibility and safety on the road. Common issues that lead to rear lamp replacements include burnt-out bulbs, cracked housings, or electrical malfunctions.

The assembly does not include the bulb socket, which can be purchased separately if needed. Easy to install and replace, the process typically involves removing the existing lamp assembly and connecting the new lamp to the electrical wiring.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: 406 4 Door
• Product Codes: 9630364877, 6350L5, 634737
• Additional Numbers: None