Original left rear light for Citroën Xsara combi (break), OEM PSA code 6350J8. It is a used part of the dismantling that fits exactly into the original handles and uses a serial connector – without modifications and without compromises in compatibility. Suitable as a substitute after damage, lighting defects or failed MOT due to poor visibility.

light performs the function of combined rear lighting (outline, brake, directional and additional functions according to the equipment). The cover is designed to ensure the correct light characteristics and readability of signals. As a result, the safety and legality of the car operation are maintained. Backets with bulbs are not included – it can be purchased separately.

The condition corresponds to age and common use, the part is suitable for immediate assembly. Compared to unoriginal substitutes, it offers accurate shape, proper fit with bodywork and long -term weather resistance.

Mounting tip: The replacement is usually easy. Open the luggage compartment, remove the inner cover/upholstery at the lamp location, disconnect the electric connector, loosen the fastening nut/screws from the inside of the body and pull the light outwards. Transfer the base with bulbs (if you use it again), check the seals, insert the new light into the body and tighten it evenly. Verify the function of all bulbs before the final assembly.

We recommend to verify compatibility according to OEM code 6350J8 and according to the design of the Kombi (Break) body. Location on the vehicle: rear left side (for left -hand drive cars).

Technical information

• manufacturer: dog/Citroën -peugeot (original part)
• Model: Citroën Xsara Estate (Break)
• Product codes: 6350J8, 6350.J8, 6350 J8
• Other numbers: Not specified

To be sure of conformity with your car, compare the shape, attachment and connector with the original part. If necessary, the code 6350J8 will help you identify the correct light.

Product Overview

Replacement left rear lamp socket designed for Citroën Xsara Estate (Kombi). This unit accepts the vehicle’s tail, brake and indicator bulbs (bulbs not guaranteed) and is delivered with a short piece of wiring for a straightforward swap. Ideal for mechanics and DIY enthusiasts looking to restore reliable electrical contact in the rear light cluster.

Key Benefits

• Direct fit for left rear lamp assembly on Citroën Xsara Estate models where the OE socket is worn or damaged.
• Comes with a short wiring pigtail to simplify installation and avoid cutting factory harness where possible.
• Restores reliable bulb contact, reducing intermittent rear light failures and improving safety.
• Commonly referenced by part code 6350J8 / 6350.J8 for fast lookup.

Compatibility

Fits Citroën Xsara Estate (Kombi) models. Often searched and identified by product code 6350J8 (also seen as 6350.J8). Verify bulb type before installation to ensure correct lamp operation.

How To Replace

• Open the tailgate and remove the interior trim to access the rear lamp assembly.
• Unscrew the lamp cluster securing screws and gently pull the assembly out to gain access to the bulb holders.
• Unplug the original socket from the wiring harness, note the wiring positions, and remove the old socket from the lamp unit (often by twisting or unclipping).
• Install the replacement socket into the lamp cluster, connect the wiring pigtail to the vehicle harness (match colors/positions), and check mechanical fit and electrical contact.
• Refit the lamp assembly and interior trim, then test all lamp functions (tail, brake, indicator) before completing the job.
• When replacing, inspect bulbs and lamp lens for signs of water ingress or corrosion that could affect longevity.

Installation Recommendations

• Work Methodically: Keep track of screw locations and wiring positions to ensure correct reassembly.
• Clean Contacts: If present, clean corroded terminals in the lamp housing before fitting the new socket to ensure good electrical connection.
• Secure Wiring: Route and secure the pigtail to avoid chafing or pinching when reassembling the lamp and trim.
• Test After Fitment: Verify all light functions operate correctly before delivering the vehicle back to the customer or completing the job.

Why This Part Fails

Socket failures are commonly caused by plastic aging and heat cycling that lead to cracking or deformation, corrosion of electrical contacts due to moisture ingress, poor contact caused by worn bulb bases, or damage from impact or wiring strain. Vehicles exposed to road salt and high humidity are particularly prone to terminal corrosion.

Technical Information

• Manufacturer: Citroën / Stellantis
• Model: Citroën Xsara Estate (Kombi)
• Product Codes: 6350J8, 6350.J8
• Additional Numbers: None provided

Notes

Part Supplied With A Short Length Of Wiring. Bulb Functionality Not Guaranteed — Replace Bulbs If Required. Inspect The Lamp Housing For Water Ingress Or Corroded Contacts When Replacing The Socket.