This used steering column stalk assembly is a direct-fit replacement for a range of PSA/Stellantis models and is often searched by its product codes 96542558XT, 6242F9 or 6239V7. Designed for mechanics and experienced DIY enthusiasts, the unit restores essential multifunction controls at the steering column — from lighting and wipers to cruise and audio controls — helping to eliminate intermittent faults, non-responsive switches or missing functions after an accident or wear.

How The Part Functions

The multifunction stalks combine several electrical switches and sensors into one compact module mounted on the steering column. Functions include activation of fog lights, inputs to the onboard trip computer, signal from the rain/wiper sensor, horn circuit, cruise-control commands and radio control inputs (where applicable). Mechanical levers operate internal contacts and microswitches; electrical signals are then sent through the column wiring to the vehicle control units.

How To Replace

• Disconnect The Battery: Always disconnect the negative battery terminal before starting to avoid short circuits and to prevent airbag deployment.
• Remove Steering Column Covers: Unscrew and separate the upper and lower plastic shrouds to access the stalk assembly.
• Disconnect Electrical Connectors: Carefully unplug the multi-pin connectors. Do not pull on wiring—use the connector bodies.
• Unscrew The Stalk Assembly: Remove fixation screws and slide the unit off the column. In some models the steering wheel must be centered or slightly removed to gain access.
• Transfer Subcomponents If Needed: Radio control stalks or specific inserts may need to be transferred from the old unit to the new one.
• Install And Test: Refit in reverse order, reconnect the battery and verify all functions (lights, wipers, horn, cruise, radio). Check for any fault codes and clear if necessary.

Technical Information

• Manufacturer: Delphi
• Model: DELPHI COM 2000
• Product Codes: 96542558XT, 6242F9, 6239V7
• Additional Numbers: 6239V7 | 6242F9 | 96542558XT
• Compatible Models: Citroën C5 I, Citroën C8, Citroën Xsara, Citroën Xsara Picasso, Peugeot 307, Peugeot 807

Installation Recommendations

• Always Disconnect The Battery Before Work To Prevent Short Circuits And Airbag Deployment.
• Use Correct Tools And Avoid Excessive Force On Plastic Covers And Connectors.
• Inspect Wiring And Connector Pins For Corrosion Or Damage; Clean Contacts With Appropriate Electronic Cleaner If Needed.
• Transfer Any Required Control Inserts (For Example The Radio Control Stalk) From The Old Unit If They Are Not Included.
• After Installation, Verify All Functions And Clear Any Related Fault Codes With Diagnostic Equipment.

Most Common Reasons For Failure

• Mechanical Wear: Repeated use causes microswitches and plastic parts to wear or break, leading to intermittent or lost functions.
• Contamination And Corrosion: Moisture ingress or dirt on contacts produces poor conductivity and unreliable switching.
• Electrical Faults: Frayed wiring, broken connector pins or short circuits can interrupt signals to vehicle control units.
• Impact Damage: Accidents or sudden impacts to the steering column area can deform or break the stalk assembly.

Searchable Product Codes: 96542558XT | 6242F9 | 6239V7 — use these references to quickly locate the correct unit for Citroën and Peugeot models. Ideal for professional workshops and skilled DIYers who need a cost-effective solution to restore steering column controls.

High-quality Steering Column Stalk Assembly Designed To Replace Faulty Or Worn EATON COM2000 Units On Various Citroën And Peugeot Models. This Multifunction Stalk Operates Fog Lights, Trip Computer Functions, Wiper Sensor Inputs, Horn, Cruise Control And Radio Controls (Radio Button Module May Need To Be Supplied Or Transferred From The Original Unit). The Part Is Commonly Referenced By Its Product Code 96375855ZL When Searching In Catalogs Or Online.

Technical Information

• Manufacturer: Eaton (Used On Stellantis Citroën/Peugeot)
• Model: COM2000 / Steering Column Stalk
• Product Codes: 96375855ZL, 963758555ZL
• Additional Numbers: 6242F9, COM2000
• Compatible Vehicles: Citroën C5 (I), Citroën C8, Citroën Xsara, Citroën Xsara Picasso, Peugeot 307, Peugeot 807

Function And Application

The Stalk Assembly Centralizes Several Controls On The Steering Column To Provide Convenient Access To Lighting, Wipers, Cruise Control, Horn And Radio Functions Without Removing Hands From The Wheel. It Interfaces With The Vehicle’S Steering Column Wiring Harness And The Central Electronics Unit To Transmit Switch Signals To The Relevant Systems.

How Replacement Is Performed

General Replacement Steps For Mechanics And Experienced DIYers:

• Disconnect The Battery And Wait A Few Minutes To Ensure Systems Are De‑energized.
• Remove Steering Column Trim Covers To Access The Stalk Fastenings.
• Unscrew The Mounting Screws And Carefully Unplug Electrical Connectors.
• Transfer Any Required Submodules (For Example Radio Control Buttons) If They Are Not Included With The New Stalk.
• Fit The Replacement Unit, Reconnect Connectors, Reassemble Trim And Reconnect The Battery.
• Verify All Functions: Indicators, Wipers, Fog Lights, Trip Computer Inputs, Horn, Cruise Control And Radio Controls.

Installation Recommendations

Always Disconnect The Battery Before Starting Work. Use Correct Trim Tools To Avoid Damage To Plastic Covers. Ensure Connectors Seat Properly And Retaining Clips Are Engaged. If The Radio Control Module Is Separate, Transfer It Carefully To Preserve Wiring And Connectors. After Installation, Check All Functions Under Static Conditions And During A Short Test Drive.

Why The Part Most Commonly Fails

Common Causes Of Failure Include Mechanical Wear Of Internal Contacts, Oxidation Or Corrosion On Electrical Contacts, Ingress Of Moisture Or Dirt, Broken Plastic Levers Or Mounting Clips And Intermittent Connector Faults. Frequent Use Of Buttons And Switches, Long Service Life Or Exposure To Humidity Accelerates Degradation.

Notes And Practical Tips

• Part Numbers Like 96375855ZL Are Often Used By Technicians And DIY Customers To Find The Correct Replacement Quickly.
• If Radio Controls Are Missing From The Supplied Unit, Plan To Transfer The Original Control Module Or Source The Specific Module Separately.
• After Replacement, Perform Functional Checks For All Associated Systems; Some Features May Require Additional Initialization In The Vehicle’S Settings, Depending On Model And Equipment.

With regular use, steering column control stalks may wear out or malfunction due to electrical failure or physical wear from repetitive usage. It is advisable to replace these components promptly to maintain optimal control over your vehicle’s functions.

When replacing the steering column control stalk, proper installation is necessary to guarantee that all functions operate as intended. Consult your vehicle’s manual or a professional mechanic for guidance on the replacement process to ensure safety and compliance with manufacturer specifications.

Technical Information

• Manufacturer: EATON
• Model: C5
• Product Codes: 96375852ZL, 6242F9
• Additional Numbers: 6242F9