Part description

Used Citroën Peugeot 96605590XT 624297 lever controls are an important part of controlling the comfort and operational functions of the car. It is a multifunctional DELPHI COM2003 module that combines the control of several systems into one unit under the steering wheel. Thanks to this, replacement is a suitable solution in the event of malfunction of levers, irregular function of wipers, fog lights or other controlled elements.

This car part is searched primarily by serial number, so we also list the exact designations 96605590XT and 624297. The part comes from a Peugeot 307 and according to the available documents it controls:

• fog lights,
• board computer,
• front and rear wipers,
• ESP,
• cruise control and car radio (controller must be supplied or transferred).

For mechanics and DIYers alike, this is a practical used part that can help restore proper control function without having to purchase a new original module.

Technical information

• Manufacturer: DELPHI
• Model: Peugeot 307
• Other numbers: 96605590XT, 624297, NFP, COM2003

Product codes

• Product codes: 96605590XT, 624297
• Models from labels/backgrounds: Peugeot 307

Installation recommendations

Generally/typically for this type of part, the exact replacement procedure may vary depending on the specific model, steering wheel design and vehicle equipment. Care must be taken with the controls under the steering wheel, especially because of the surrounding electrical components.

1) Before assembly

• Check that the part numbers 96605590XT and 624297 match the old part.
• Compare the connectors, mounting, the shape of the body of the module and the design of the levers.
• Check the physical condition of the used part – cracks, play in levers, damaged connector locks or signs of oxidation.
• If you are transferring the cruise control or car radio, prepare the original part for transfer according to the car design.
• Before starting work, disconnect the battery and wait a reasonable time according to normal service practice.

2) Necessary tools and materials

• regular set of hand tools,
• screwdrivers or bits corresponding to the joints used,
• plastic crowbar for removing covers,
• clean cloth,
• preparation for gentle cleaning of electrical contacts, if needed,
• protective gloves.

3) Step-by-step assembly procedure

1. Park the vehicle in a safe place and secure it against movement.
2. Turn off the ignition and disconnect the battery.
3. Remove the steering column covers to access the controls module under the steering wheel.
4. Carefully disconnect the electrical connectors from the old module. Do not pull on the cables, but on the bodies of the connectors.
5. Unfasten the original controller and remove it without using force to avoid damaging the surrounding plastics or connectors.
6. Compare the original and the new part side by side, especially the position of the connectors, the attachment and the design of the levers.
7. If it is necessary for your version, transfer the additional control of the cruise control or car radio from the old part.
8. Place the replacement module in the correct position and fasten it in the same way as the original part.
9. Connect all connectors and check that they are fully seated and secure.
10. Refit the steering column covers.
11. Connect the battery.
12. After switching on the ignition, test the individual functions of the controller one by one.
• 4) Post-assembly checks and function verification
  • Check the operation of the front and rear wipers.
  • Verify fog lights control and other available light functions.
  • Test the reactions of the on-board computer.
  • If the car is so equipped, check the function of ESP, cruise control and car radio control.
  • Make sure the levers run smoothly, do not return stiff and do not show excessive play.

  5) The most common assembly mistakes + how to avoid them

  • Part exchange based on similar appearance – always compare product numbers and connector designs.
  • Damage to the connectors – disconnect the connectors gently and without prying with inappropriate tools.
  • Insufficient seating of the module – after fixing, check that the part fits correctly and nothing is in tension.
  • Forgot to transfer the additional controller – before final assembly, check whether the cruise control or car radio control is resolved.
  • Assembly without checking all functions – after replacement, always go through all control modes, not just one lever.

  Reasons why the part is damaged

  • normal wear and tear of mechanical parts during long-term use,
  • frequent switching of functions and straining of levers during daily operation,
  • play or fatigue of the module’s internal contacts,
  • oxidation or contamination of electrical contacts,
  • careless handling during previous disassembly or assembly,
  • damage to plastic parts due to age and temperature changes.
  ]]>