High-quality multifunction stalk assembly designed for professional workshops and DIY mechanics who maintain Citroën and Peugeot cars. This Delphi COM2000 set centralizes control of exterior lights, windshield wipers, infotainment commands and vehicle stability functions into a single, serviceable unit. Ideal for search by part number (96477540XT / 6242C4 and related references), the listing helps you quickly identify the correct replacement when diagnosing faults in the steering column controls.

Technical information

• Manufacturer: Delphi
• Model: Citroën Xsara, Citroën Xsara Picasso, Peugeot 307 (including 307 II), Peugeot 308 I
• Product Codes: 96477540XT, 6242C4, 624218, 6242J0
• Other Numbers: 623939, 6239AK, 6239M2, 6239PW, 6239W2, 96511197XT, 96542556XT, 96595087XT, COM2000

Function and Common Uses

The COM2000 stalks operate fog lights, front and rear wipers, the car radio interface, the trip/board computer and ESP related signals. In many vehicle variants the radio and cruise-control stalks are separate modules and can be fitted additionally if required.

How It Is Replaced

Replacement is straightforward for a trained technician or an experienced DIY mechanic with basic tools. General procedure: disconnect the negative battery terminal and wait a few minutes; remove steering column trim panels (retain screws/clips); unplug electrical connectors from the stalk assembly; release retaining clips or screws and remove the old stalk unit; fit the new COM2000 assembly ensuring correct orientation; reconnect all plugs and reassemble trims; reconnect the battery and verify all functions (lights, wipers, radio controls, trip computer and ESP warnings). Always follow vehicle manufacturer safety steps for handling steering column components and airbags.

Installation Recommendations

• Always Disconnect The Battery Before Work—wait at least 5–10 minutes to discharge capacitors and avoid airbag deployment risk.
• Keep Connectors Clean—inspect plugs for corrosion or bent pins and clean contact surfaces before reconnecting.
• Use Proper Tools—avoid damaging trim clips and steering column covers; use appropriate screwdrivers and plastic trim tools.
• Test All Functions After Fitment—verify lighting, wipers, radio controls, trip computer and ESP indicators before returning the vehicle to service.

Why This Part Fails Most Often

Multifunction stalk failures are usually caused by normal wear of internal electrical contacts and sliding carbon tracks, moisture ingress leading to corrosion, or mechanical damage to the plastic levers and retaining clips. Heavy use of stalk switches (frequent wiper and light operation), water leaks into the column area, or previous collision damage to the steering column are common contributors. Fault symptoms include intermittent operation, complete loss of certain functions (e.g., wipers or fog lights), or stuck/mechanically loose stalks.

Notes For Professionals

This product is aimed at workshops and experienced DIYers. The item is typically searched by reference numbers—include those in your diagnostics and parts lookup to ensure quick match. If additional radio or cruise-control stalks are required, they can be sourced separately to restore full functionality.

High-quality replacement steering column stalk switches (COM2000 type) designed for Citroën and Peugeot models. This unit handles multiple vehicle functions from a single module: fog lights, front and rear wipers, radio commands, trip computer navigation and ESP signals. It is a practical choice for professional workshops and DIY mechanics who need a direct-fit control stalk assembly with known OE reference numbers for quick identification.

Applications And Compatibility

Commonly fitted to:

• Peugeot 307
• Peugeot 308 (First Generation)
• Citroën Xsara
• Citroën Xsara Picasso

Often searched by OE/product codes listed below. Suitable when the vehicle uses the DELPHI COM2000 steering stalk assembly.

Technical Information

• Manufacturer: Delphi
• Model: COM2000
• Product Codes: 96542556XT, 6242C4
• Other Numbers: 624218, 6242J0, 623939, 6239AK, 6239M2, 6239PW, 6239W2, 96477540XT, 96511197XT, 96595087XT

Installation And Replacement

Basic replacement steps for experienced technicians or competent DIY mechanics:

• Disconnect The Battery Before Starting To Avoid Short Circuits And Reduce Airbag Risk.
• Remove The Steering Wheel Trim/Covers To Access The Stalk Unit (Follow Manufacturer Procedure To Avoid Damaging Clips Or Airbag Components).
• Unscrew The Retaining Screws And Carefully Release The Stalk Module From The Column.
• Disconnect Electrical Connectors—Note Their Positioning For Correct Reassembly.
• Install The Replacement Stalk, Reconnect All Plugs, Refit Covers And Reconnect The Battery.
• Verify All Functions (Wipers, Lights, Radio Controls, Trip Computer, ESP Indications) Before Releasing The Vehicle.

Installation Recommendations

• Use Correct Tools And A Clean Work Area To Prevent Damaging Connectors Or Plastic Trim.
• Observe Torque Specifications For Any Fasteners And Ensure Connectors Are Fully Seated.
• If Any Additional Steering Electronics Or Airbag Components Are Disturbed, Follow Manufacturer Service Manual Steps.
• After Installation, Check For Fault Codes And Clear Them If Necessary Using Appropriate Diagnostic Equipment.

Most Common Failure Causes

Failures Typically Occur Due To Mechanical Wear And Electrical Contact Degradation Over Time. Common Symptoms And Causes Include:

• Intermittent Or Non-Working Wipers, Lights Or Radio Controls Caused By Worn Internal Switches Or Dirty Contacts.
• Moisture Ingress Or Corrosion Leading To Short Circuits And Erratic Behavior.
• Physical Damage From Impact Or Excessive Force On The Stalks Resulting In Broken Levers Or Internal Mechanisms.
• Wear From High Mileage And Long Service Life Leading To Loss Of Tactile Function.

Why Choose This Part

This COM2000-type stalk assembly is listed under multiple OE references, making it easier for mechanics to identify correct parts during repair. It consolidates several controls into a single, serviceable unit—reducing diagnostic time and restoring full steering-column functionality when faulty switches affect safety-related systems like lighting and wipers.

Product Overview

Multifunction steering column stalk assembly (Delphi COM2000) designed for a range of Citroën and Peugeot models. The unit integrates control of lighting (including fog lights), wiper systems (front and rear), radio commands, trip computer functions and ESP-related inputs. It is a direct replacement option commonly sought by mechanics and DIY enthusiasts by part number and cross-reference codes.

How It Works

The stalk assembly transmits driver inputs to the vehicle’s body/comms network and relevant control units. Mechanical levers and internal electrical contacts close circuits for wipers, indicators and lights, while electronic switches send signals for radio and on-board computer functions. Proper operation depends on intact mechanical parts, clean contacts and reliable connector wiring to the vehicle harness.

Installation Recommendations

Always disconnect the battery before starting work. Typical replacement steps:

• Disconnect Battery And Wait A Few Minutes To Ensure System Power Is Removed.
• Remove Steering Column Trim Panels To Access The Stalk Assembly.
• Unplug Electrical Connectors And Unscrew Fastening Screws Or Clips.
• Fit The Replacement Stalk, Reconnect Connectors And Secure Fasteners To Manufacturer Torque Where Specified.
• Reassemble Trim Panels And Reconnect The Battery. Verify All Functions (Wipers, Lights, Radio Controls, Trip Computer, ESP Alerts).

If faults persist after fitment, check wiring, ground points and related fuses/relays before replacing other modules.

Why The Part Fails Most Often

Common failure causes include mechanical wear of the lever mechanism and internal contact degradation from prolonged use, ingress of moisture leading to corrosion, accumulation of dirt affecting electrical contacts, and intermittent failures due to connector corrosion or broken wiring. Physical impact to the steering column or aggressive removal/installation can also damage the unit.

Compatibility And Application

Fits a range of Citroën and Peugeot applications where Delphi COM2000 steering column stalks are used. Frequently searched by part number; check listed codes below against your reference.

Technical Information

• Manufacturer: Delphi
• Model: COM2000 Steering Column Stalk / Multifunction Stalk
• Product Codes: 96595087XT, 6242C4, 624218, 6242J0, 623939, 6239AK, 6239M2, 6239PW, 6239W2
• Additional Numbers: 96477540XT, 96511197XT, 96542556XT, 96595087XT, COM2000

Typical Fitment (Examples)

Commonly associated models include:

• Citroën Xsara
• Citroën Xsara Picasso
• Peugeot 307 (including Mk II applications)
• Peugeot 308 (Mk I)

Notes For Mechanics And DIY Enthusiasts

This unit is a mechanical/electrical assembly—careful handling and correct reconnection are essential. After replacement, verify all functions and check for stored fault codes if available. If the vehicle exhibits network or comfort module errors after fitment, inspect connectors and harness continuity first.

Replace your worn or faulty steering column stalk with a direct-fit DELPHI COM2000 unit designed for a range of Citroën and Peugeot models. This multi-function stalk assembly operates front and rear wipers, fog lamps, radio controls, the onboard trip computer and ESP functions, offering reliable control from the steering column. Ideal for professional workshops and DIY mechanics searching by part number (e.g. 96511197XT, 6242C4), the unit restores full functionality and driving comfort.

Fitment And Applications

Commonly fitted to Citroën and Peugeot compact models. Typical compatible models include:

• Citroën Xsara
• Citroën Xsara Picasso
• Peugeot 307 (including 307 II)
• Peugeot 308 I

Benefits For Mechanics And DIYers

• Direct Replacement: Matches factory functions and connectors for straightforward swap.
• Multiple Part Numbers Indexed: Easier to find using OEM or alternative numbers in catalogs.
• Improves Safety And Convenience: Restores signaling, wiper control and ESP input to original operation.
• Compatible With Radio And Cruise Options: Radio/cruise stalk available separately if required.

Technical Information

• Manufacturer: Delphi (OE For Stellantis)
• Model: COM2000 Steering Column Stalk
• Product Codes: 96511197XT, 6242C4, 624218, 6242J0
• Additional Numbers: 623939, 6239AK, 6239M2, 6239PW, 6239W2, 96477540XT, 96542556XT, 96595087XT, COM2000

How It Fails — Most Common Causes

Steering column stalks of this type most often fail due to worn internal contacts after many cycles, moisture ingress and corrosion affecting electrical contacts, or mechanical breakage of the stalk lever. Intermittent operation of wipers, loss of radio steering controls or malfunctioning ESP inputs are typical symptoms. Pin corrosion on the connector or damage to the wiring harness can also mimic stalk faults.

Replacement Procedure (Overview)

Recommended for experienced mechanics and competent DIY enthusiasts. Basic replacement steps:

• Disconnect the negative battery terminal before any work.
• Remove airbag and steering wheel where necessary following the manufacturer’s safety procedure.
• Unscrew and remove the upper and lower steering column covers to access the stalk assembly.
• Unplug electrical connectors and remove retaining screws or clips securing the stalk module.
• Install the new stalk assembly, reconnect connectors and reassemble covers and steering wheel.
• Reconnect the battery and test all functions: wipers, fog lights, radio controls, trip computer and ESP warnings.

Installation Recommendations

• Always Disconnect The Battery Before Starting Work To Avoid Airbag Or Module Damage.
• Follow Vehicle Manufacturer Procedures For Airbag And Steering Wheel Removal.
• Inspect Connectors And Wiring For Corrosion Or Damage Before Installing The New Unit.
• If The Vehicle Has Radio Or Cruise Functions On The Stalk, Ensure All Required Modules Are Present And Correctly Connected.

Installation And Coding – Important

• The Unit Is Used And May Be Paired With The Original Vehicle (VIN/PIN/Keys).
• Options For Commissioning:
1. Cloning Data From The Old Unit (EEPROM/Flash) – After Cloning The Unit Is Plug And Play.
2. Virginization And Subsequent Initialization/Telecoding Via DiagBox (Or Online) + Key Adaptation.
• It Is Recommended That This Be Performed By A Professional With PSA Service Equipment (DiagBox/Lexia/PP2000).
• Always Disconnect The Battery Before Demounting/Mounting And Follow The Manufacturer’S Procedure To Avoid Damaging The Unit.

Why Choose This Unit

If your vehicle shows intermittent or complete loss of stalk functions, replacing the DELPHI COM2000 stalk assembly is a cost-effective way to restore control and safety systems to full operation. The part numbers listed make it easy to find and confirm fitment when searching catalogues or part-number-driven marketplaces.

Order now to get the correct steering column stalk for your Citroën or Peugeot and bring back full steering-column control functions quickly and reliably.