High-quality replacement steering-column stalks for Peugeot and Citroën models using the DELPHI COM2000 system. This unit consolidates multiple vehicle functions into a compact, ergonomically placed module: fog lights, onboard computer controls, rear wiper, ESP activation, cruise control and radio/infotainment switch functions. Commonly searched by part numbers such as 96595089XT, 96574694XT or 6242C5, this component is aimed at professional workshops and experienced DIY mechanics who need a reliable, direct-fit control solution.

Benefits

– Direct replacement for vehicles equipped with the COM2000 steering column control system, helping restore full functionality of lighting, wipers, cruise and dashboard controls.
– Saves time in diagnostics by addressing common symptom sets: intermittent lighting, non-responsive wiper/rear wiper, lost cruise control or absent trip computer control.
– Includes multiple OEM cross-references to improve part lookup by product number.

Fitment

Compatible with many Citroën and Peugeot models using the COM2000 arrangement, including (non-exhaustive list): Citroën Berlingo II, Citroën C5 I, Citroën C8, Citroën Xsara, Citroën Xsara Picasso; Peugeot 206, Peugeot 307 (phase 1), Peugeot 406, Peugeot 807, Peugeot Partner II. Check the product codes below to match your vehicle application.

Technical Information

• Manufacturer: Delphi (COM2000) / Stellantis OEM
• Model: COM2000 Steering Column Stalk / Combination Switch
• Product Codes: 96574694XT, 96595089XT, 96605654XT, 6242C5, 624219
• Other Numbers: 6239AN, 6239M4, 6239PY, 6239W3, 6239X7, COM2000

Installation & Recommendations

Follow a careful step-by-step replacement routine. Typical installation procedure:

• Disconnect the negative battery terminal before starting any work to avoid electrical damage and airbag system faults.
• Remove the steering column trim using plastic trim tools to avoid scratching covers.
• Disconnect electrical connectors and, if applicable, unclip the combination switch from the column.
• Transfer any required sub-components (e.g., radio or cruise stalk insert) if your replacement unit does not include them—many applications require the original control insert to be fitted to the new stalk.
• Refit the new stalk, reconnect all plugs and reassemble trim. Reconnect the battery and verify all functions (lights, wipers, cruise, trip computer, ESP warnings and radio controls).

Note for workshops: In most cases the COM2000 stalk is a mechanical/electrical swap and will restore functions immediately, but always verify full system operation after fitting. Use manufacturer repair procedures if any adaptive or initialization steps are required by the vehicle.

Why This Part Fails

Common failure causes include worn internal contacts from frequent use, moisture ingress and corrosion in the connector or switch body, mechanical breakage of plastic levers, and electrical faults caused by short circuits or damaged wiring. Symptoms are typically intermittent or total loss of specific functions (fog lights, rear wiper, cruise control or trip computer buttons). Age and exposure to humid conditions accelerate wear.

Practical Tips for Mechanics and DIYers

• Always compare product codes (listed above) with the part number you remove—many customers search by code for exact compatibility.
• If the replacement unit appears to lack a specific button insert (e.g., radio control), plan to transfer that small subcomponent from the old stalk to maintain full functionality.
• After installation, check for related faults such as airbag warning lights or steering wheel control inoperability—these can indicate connector seating issues or a need for additional configuration.
• Keep the area dry and treat connectors with dielectric grease if appropriate to reduce future corrosion.

Common Search Keywords

COM2000 stalk, Steering column switch, Citroën 96595089XT, Peugeot 6242C5, combination switch replacement, fog light stalk, trip computer control, rear wiper switch.

High-quality replacement steering column stalks compatible with a wide range of Citroën and Peugeot models. Designed to restore full control of lighting, wipers, driving aids and cruise functions, these COM2000-type stalks are commonly found on vehicles equipped with the Delphi COM2000 system. Ideal for professional mechanics and experienced DIYers who maintain Stellantis group cars, the part is often searched for by its product codes (e.g. 96605654XT, 96574694XT).

Key Features

• Direct-fit design for models listed below – plug-in replacement for original stalks (subject to model variation).
• Controls: Fog Lights, Trip Computer, Rear Wiper, ESP Warning/Reset, Cruise Control, Radio Control (radio stalk may need to be supplied or transferred).
• OEM and OE-referenced part numbers included to simplify lookup: 96574694XT / 96605654XT and other common codes.
• Durable switch contacts and plastic housings designed for frequent use in everyday driving conditions.

Technical Information

• Manufacturer: Delphi
• Model: COM2000 Steering Column Stalks
• Product Codes: 96574694XT, 96605654XT, 6242C5, 624219
• Other Numbers: 6239AN, 6239M4, 6239PY, 6239W3, 6239X7, COM2000
• Compatible Models: Citroën Berlingo II, Citroën C5 I, Citroën C8, Citroën Xsara, Citroën Xsara Picasso, Peugeot 206, Peugeot 307 (I), Peugeot 406, Peugeot 807, Peugeot Partner II

How It Works

The steering column stalk assembly houses multiple mechanical switches and electrical contacts that transmit driver inputs (e.g., turning on fog lights, activating cruise control or toggling the trip computer) to the vehicle’s body and convenience systems. On cars using the Delphi COM2000 architecture, these signals are routed through the COM2000 module and associated wiring harnesses.

Replacement Procedure (General Guidance)

Typical replacement steps for professional mechanics or experienced DIYers:

• Disconnect the negative battery terminal before starting any work.
• Remove the steering column trim covers to access the stalk mounting points. On many models the top and bottom shrouds are held by screws beneath the wheel.
• If required, remove or secure the steering wheel airbag according to manufacturer safety procedures—airbag work should be performed by trained personnel.
• Unplug the stalk electrical connectors and release any retaining clips or screws securing the stalk assembly.
• Install the new stalk, reconnect the connectors and reassemble the column covers. Verify all functions (lights, wipers, ESP indications, cruise control, trip computer). Reset any fault codes if necessary with diagnostic equipment.

Installation Recommendations

• Always disconnect the battery before starting work to prevent electrical shorts and avoid accidental airbag deployment.
• Handle connectors and flexible ribbon cables carefully to prevent damage to pins and locking tabs.
• If airbag removal is required, have the job carried out by a qualified technician or follow the vehicle manufacturer’s safety procedure.
• After installation, check for stored fault codes and test all functions. Recalibration or clearing of errors may be needed via diagnostic tools compatible with Stellantis systems.

Most Common Causes Of Failure

• Wear Of Internal Contacts: Frequent use causes contact wear, resulting in intermittent or failed switch operation (indicators, wipers, lights).
• Moisture And Corrosion: Water ingress or corrosion of connectors can lead to electrical faults and unreliable behaviour.
• Mechanical Damage: Broken levers, plastic clips or fatigued mounting points from rough handling or impact.
• Electrical Surges Or Short Circuits: Faulty wiring or electrical faults in related modules can damage internal switch electronics.

Why Choose This Part

Using the correct COM2000-compatible stalks with matching product codes (96574694XT / 96605654XT etc.) ensures proper fitment and restores driver controls to factory-like operation. The part is particularly useful when original stalks display intermittent behaviour, stuck switches, or physical damage.

Notes

Search by product codes (e.g., 96605654XT, 96574694XT, 6242C5) to find exact matches for your model. Compatibility may vary by production date and equipment level—refer to vehicle parts lists or cross-reference the listed codes when selecting the correct unit.

High‑quality Delphi COM2000 steering column stalks are a direct replacement option for mechanics and competent DIYers working on Citroën and Peugeot models. Designed to operate multiple vehicle functions from behind the wheel, these stalks restore full control of lighting, wipers, cruise and driver information systems. Commonly searched by part numbers such as 96574694XT, 96595089XT, 96605654XT, 6242C5 and 6239AN, this unit is ideal for garages and parts shops that need fast identification and fitment.

Technical Information

• Manufacturer: Delphi / Stellantis Compatible
• Model: Fits Selected Citroën And Peugeot Models (See Compatibility)
• Product Codes: 96574694XT, 96595089XT, 96605654XT, 6242C5
• Other Numbers: 624219, 6239AN, 6239M4, 6239PY, 6239W3, 6239X7, COM2000

Compatibility

Compatible With Many Stellantis Platforms Including: Citroën Berlingo II, Citroën C5 I, Citroën C8, Citroën Xsara, Citroën Xsara Picasso; Peugeot 206, Peugeot 307 (Phase I), Peugeot 406, Peugeot 807, Peugeot Partner II. Verify Fitment By Matching The Part Number Listed Above.

Installation Recommendation

For safe and reliable replacement: Disconnect The Battery And Follow The Manufacturer’s Procedure Before Starting Work. Remove Steering Column Covers, Unplug The Connectors To The Stalk Assembly And Carefully Unclip The Old Unit. Transfer Any Required Controls Or Buttons If Necessary And Fit The New Stalk, Ensuring All Electrical Connectors Are Fully Seated. After Assembly, Check All Functions (Lights, Wipers, Cruise, ESP Indications, Radio Controls, Trip Computer) On A Test Drive.

Why This Part Fails

Steering Column Stalks Commonly Fail Due To Mechanical Wear Of The Internal Contacts, Oxidation Or Corrosion Of Electrical Contacts, Moisture Ingress, Broken Plastic Levers Or Fatigued Internal Switch Mechanisms. Symptoms Include Intermittent Operation, Sticking Or Non‑Responsive Controls, Or Loss Of Specific Functions (For Example Fog Lights Or Cruise Control).

Practical Notes For Professionals And DIYers

• When Replacing, Keep Track Of Small Clips And Screws; Plastic Shrouds Are Prone To Damage If Over‑Torqued.
• If Multiple Functions Are Affected Simultaneously, Inspect Related Connectors And Ground Points For Corrosion Or Poor Contact.
• Some Vehicles May Require Additional Configuration Or Learning After Replacement—consult technical manuals for model‑specific steps.
• Using The Correct Part Number (Listed Above) Greatly Reduces Diagnosis Time And Returns.

This Delphi COM2000 steering stalk assembly offers a cost‑effective way to restore full steering‑column control on compatible Citroën and Peugeot vehicles while matching common OE part numbers used in service and spare‑parts searches.