Original right rear light – outer part in the fender – designed for Citroën C -Crosser cars. Ideal replacement for cracks, roasts or minor accidents. It comes without the base of the bulbs 621565, which can be purchased separately.

The part fits exactly to the original handles and retains the appearance and function of the rear lights. It is the right side (passenger side in the Czech Republic), an outer lamp located in the fender – not a part in the lid of the fifth door. For easy trace and compatibility control, 6350eG is often sought by codes.

Typical manifestations of defects include cracked glass, moisture inside and oxidized contacts, which can cause a non -functional rudder or outline. The replacement is usually fast – you can handle it with regular tools.

mounting tips:
– the approach is from the trunk after dismantling part of the upholstery; The matrix/screws holding the lamp is released, the connector disconnects and the part is removed from the body.
– Transfer the base of the bulbs and the bulbs from the old lamp, or get a new 621565 socket.
– check the seals and a bearing surface before tightening; Tighten evenly to avoid mounting.
– Test all the rear lights after assembly.

To be sure of compatibility, we recommend comparing the numbers given in the original episode or verify according to the VIN. This type of lamp is used for models from the entire C -Crosser production (about 2007–2012).

technical information

• Manufacturer: Citroën (PSA)
• Model: Citroën C -Crosser, Right rear outer lamp in the fender
• product codes: 6350eG (OE/OEM)

Left rear lamp in the fender for Citroën C -Crosser. It is a used original part of dismantling, suitable as a substitute for damaged or torn rear light. Variant in the fender (body), not in the fifth door. Supplied without the base of the bulbs – it can be purchased separately.

Thanks to the original design, it fits in size and connector exactly, preserves the original appearance and light function of the vehicle. The replacement is usually fast and does not require any modifications – just switch the existing sleeves/bulbs and connect the connector.

A typical reason for replacement in this model is a crack after less tap, root and subsequent corrosion of contacts. When installing it is recommended to check the condition of the seal and base of the bulb; In the case of damage, it is advisable to replace them with a new part 621565.

Exchange procedure in a nutshell: Open the trunk lid, remove the inner lining in the lamp area, disconnect the connector, loosen the fastening nuts/screws, and gently slide the light from the body. You can settle the new piece in the opposite order – take care of the sealing correctly and do not overlap the nuts to avoid bursting of the plastic.

technical information

• manufacturer: dog/Citroën
• Model: Citroën C -Crosser, left rear lamp in the fender (about 2007–2012)
• product codes: 6350eh, 6350.EH, 6350 Eh

Please always verify compatibility by part 6350EH and compare the shape and connector with the original lamp in your car. Using the original part you can be sure of the proper function of the rear lighting and the long life.

ORIGINAL CABINATION OF LOBERS BULPS IN THE BLAUBLATION FOR CITROëN C – CROSSER, PSA code 621565 (NFP). It is a wiring bundle designed for the internal connection of the rear light located in the fender. The cabling is the same for the left and right side, so it fits both sides of the vehicle.

This part solves typical rear light problems, such as occasional outages, weak lighting or non -functional turn signal/outline light caused by transition resistors, contacts or damaged wires. Replacement of cabling is often the fastest and most reliable way to restore the correct function of lighting and pass the MOT without complications.

The assembly is straightforward: after the battery is disconnected, the rear lamp in the fender (access from the trunk space after removal of upholstery) is removed, the original connector is disconnected, the cable beam is replaced and the contacts and seals are checked. It is recommended to clean the skeletal points, check the condition of the bases of the bulbs and possibly use a contact spray or dielectric petrolatum to prevent corrosion. Do not bend the cabling on the sharp radius and guide it in the original mounts to avoid wire stress.

technical information
manufacturer: dog (Citroën/Peugeot), original part
Model: Citroën C -Crosser (about 2007–2012), rear lamp in the fender, left/right identical
product codes: 621565
Other numbers: 6215.65, 6215 65, NFP (finished production)

Always verify compatibility according to the Part code and by comparing the connector and cable management with your original cabling. Because it is an original dog solution, you maintain the correct connection and reliable function without the need to modify the wiring.

This is the original part used, suitable as a cost -effective replacement for no longer non -functional volume. Code 621565 is kept as NFP in the PSA, so this is an ideal choice for keeping the car in operation with the availability of OEM quality.