This complete instrument cluster is a direct-fit replacement suitable for workshop fitting or DIY installation. It provides speedometer, tachometer, fuel gauge and warning indicators in one unit and is commonly referenced by product numbers, making it easy to find when searching parts catalogs or online. The unit is ideal for mechanics and experienced enthusiasts working on Citroën C2/C3 models with the 1.4 HDi engine.

Key Benefits

• Direct replacement for original equipment SAGEM clusters—matching mounting points and electrical connectors.
• Commonly searched by part numbers, improving findability: 9652008280, P9652008280, 6105EV.
• Saves diagnostic time by restoring all instrument functions in a single swap.

Fitment And Models

Compatible With: Citroën C2; Citroën C3; Citroën C3 Pluriel (1.4 HDi applications). Verify model year and engine type against the part numbers where possible to ensure exact fitment.

Function And Symptoms Of Failure

The instrument cluster displays vehicle speed, engine rpm, fuel level and several warning lights. Common symptoms indicating a faulty cluster include blank or partially lit displays, erratic or stuck needles, non‑functioning odometer, or intermittent warning lights. Failures are often electrical in nature rather than mechanical.

Why The Part Fails

• Electrical Stress: Voltage spikes or poor battery/alternator regulation can damage onboard electronics.
• Wear And Tear: Stepper motors and backlighting age over time and may lose precision or fail.
• Environmental Damage: Moisture ingress or corrosion on connector pins leads to intermittent faults.
• PCB Or Component Faults: Cracked solder joints or failed components on the circuit board may cause loss of function.

Replacement Procedure (Overview)

• Disconnect Battery: Always isolate the battery negative terminal before starting to avoid short circuits.
• Remove Trim: Carefully remove dashboard trim and fasteners around the cluster to access mounting screws.
• Unscrew Cluster: Remove the retaining screws and gently pull the cluster forward.
• Disconnect Electrical Connectors: Release locking tabs and unplug all connectors; note cable positions for reassembly.
• Install New Cluster: Reconnect connectors, secure the cluster with screws and refit trim.
• Test Before Reassembly: Reconnect the battery and verify gauges, warning lights and odometer operation before finishing reassembly.
• Diagnostic Programming: In some vehicles, an instrument cluster replacement may require coding or synchronization with vehicle systems using dealer-level diagnostic tools (e.g., Diagbox/Lexia) to ensure correct immobilizer and mileage reporting.

Installation Recommendations

• Use Proper Tools: Plastic trim tools reduce the risk of breaking dashboard clips and trim.
• Handle With Care: Avoid touching circuit board components and connector pins; static discharge precautions are recommended.
• Check Power Supply: Verify battery voltage and charging system health before declaring a new cluster faulty.
• Document Mileage: Record the odometer reading prior to removal for workshop records; some markets require mileage retention procedures.

Technical Information

• Manufacturer: SAGEM
• Model: Combination Instrument Cluster (for Citroën C2 / C3 1.4 HDi)
• Product Codes: 9652008280; P9652008280
• Other Numbers: 6105EV

Note: This unit was removed from a vehicle with approximately 350,000 km. Sold as a used complete instrument cluster suitable for professional fitting or competent DIY installation.

This full instrument cluster is a direct-fit replacement unit commonly referenced by part numbers 9652008280, P9652008280 and 6105EV. Designed for Citroën C2 and C3 models with the 1.4 HDi engine, it is particularly relevant for professional mechanics and experienced DIYers who search by product code when sourcing electrical and dashboard components. The listing includes the exact codes stamped on the unit to help you find the correct match for your vehicle.

The instrument cluster provides essential driver information: vehicle speed, odometer/trip mileage, fuel level, engine warning indicators and other status lights. As a combined unit it houses both mechanical stepper motors for gauges and electronic modules for the display and warning lamp logic, integrating with the vehicle’s electrical network.

How To Replace

• Prepare: Park on a level surface, switch off ignition and remove key.
• Safety: Disconnect the negative terminal of the battery to avoid short circuits and airbag/airbag wiring issues.
• Access: Remove the trim bezel around the dashboard cluster—typically secured with clips and a few screws. Keep fasteners organized.
• Unplug: Unscrew the instrument cluster, carefully tilt it forward and unplug the multi-pin connectors. Note connector orientation and any locking tabs.
• Swap: Install the replacement unit, reconnect plugs and secure the cluster with its screws. Refit trim bezel.
• Verify: Reconnect the battery, start the vehicle and check all gauges, warning lights and odometer readout for correct function. If any warning lights remain or communications errors appear, perform electrical diagnostics on related circuits and fuses.

Installation Recommendations

• Use Proper Tools: Trim tools and a small Torx set reduce damage to dashboard plastics and fasteners.
• Battery Disconnection: Always disconnect the negative battery terminal before unplugging the cluster to protect vehicle electronics and prevent short circuits.
• Cable Care: Inspect connectors and wiring for corrosion or damaged pins; clean contacts if necessary before reassembly.
• Static Precautions: Avoid static discharge when handling the electronic module. Ground yourself or work on an anti-static mat if available.
• After Installation: Confirm odometer and trip counters are functioning and compare display behavior to the original unit to ensure proper fitment.

Common Failure Reasons

Instrument clusters on older Citroën C2/C3 models typically fail due to a few recurring causes: internal solder joint cracks from thermal cycling, worn or stuck stepper motors causing inaccurate needle movement, LCD or segment failure in the display, water ingress or moisture damage behind the dashboard, and corrosion on connector pins. Electrical surges or intermittent vehicle wiring faults can also damage the cluster electronics. Recognizing the failure pattern (flickering display, stuck needles, or partial/blank readouts) helps direct effective repair or replacement.

Technical Information

• Manufacturer: SAGEM
• Model: Citroën C2; Citroën C3; Citroën C3 Pluriel (1.4 HDi)
• Product Codes: 9652008280; P9652008280; 6105EV
• Additional Numbers: H 01; Mileage On Unit: 242000 km

Part numbers and revision codes printed on the housing are the most reliable way to confirm fitment. This listing highlights the exact codes found on the unit to help mechanics and knowledgeable DIYers locate the correct replacement quickly.

Original tachometer (dashboard, alarms) for Citroën C2 / C3 / C3 Pluriel. This is a used, fully functional part taken from a Citroën C3 1.1i car, year 2003. Ideal replacement for non-functional alarm clocks – replacement piece for piece. Actual mileage approx. 125,000 (informative; see note on synchronization with BSI below).

Key OE/PSA numbers and markings
– 9650735480, P9650735480
– Index E 00 / H 00
– 6104.ZJ, 6105.EV (6104ZJ, 6105EV)
Compare these numbers to your original part – they are essential for correct compatibility.

Compatibility
– Citroën C2 (2003–2009)
– Citroën C3 I, the so-called first generation (2002–2009)
– Citroën C3 Pluriel (2003–2010)
Note: Always verify compatibility by OE numbers and connector designs. Instrument panel variants may differ for different equipment.

Technical information
– Type: dashboard / tachometer with analog alarms (speedometer, tachometer, fuel gauge, temperature) and central display
– Vehicle network: PSA multiplex (VAN/CAN depending on vehicle equipment)
– Power supply: 12 V
– Connector interface: PSA multi-pin serial (compare physically with your part)
– Mileage status: approx. 125,000 km stored in alarms (approximate)
– Original PSA part, suitable for petrol and selected diesel variants according to coding

Assembly and coding
– Exchange is usually plug & play; with some equipment, the basic configuration of variants (language, units, on-board computer, etc.) may be required via PSA diagnostics (Lexia/DiagBox).
– For PSA cars, the number of kilometers driven is stored in the BSI and in the instrument panel. The higher of the two values ​​is usually set after first power-up. Consider this when replacing.
– Before assembly, disconnect the battery, after assembly, perform a function check via diagnostics.

Status and Verification
– Used part, fully functional, tested before disassembly.
– Normal cosmetic wear without affecting function; condition see photo.
– We recommend comparing: part numbers, index (E 00 / H 00), alarm layout and connectors.

Why choose this part?
– Original PSA quality – accurate display and communication with BSI.
– Quick solution to problems such as non-functioning backlight, display outages, incorrect indicators.
– A financially advantageous alternative to a new part.

Package contents
– 1× speedometer/instrument panel Citroën C2/C3/C3 Pluriel, OE 9650735480 (P9650735480), index E 00/H 00, PSA 6104.ZJ / 6105.EV.

Tip for car mechanics
– Before ordering, compare the described OE number from the original alarm clock with the offered piece.
– After assembly, check variant coding with diagnostics and adjust if necessary (e.g. km/h units, display configuration).

Search Terms (SEO)
Citroën C2 Speedometer, Citroën C3 Alarms, C3 Pluriel Dashboard, 9650735480, P9650735480, 6104.ZJ, 6105.EV, C2 C3 Speedometer, Citroen Alarm Panel, Used PSA Auto Parts

Are you looking for a reliable replacement for a damaged tachometer in your Citroën vehicle? Our offering of a used tachometer for Citroën C2 and Citroën C3 models with sensodrive technology is an ideal choice for every mechanic or DIY enthusiast wanting to save without compromising on quality and functionality.

This tachometer has an odometer reading of approximately 145,000 km, demonstrating its good condition and reliability. Its installation is straightforward and does not require special tools, ensuring an easy and quick replacement in your vehicle’s service.

Technical Information:
Manufacturer: PSA CITROEN PEUGEOT
Model: Citroën C2, Citroën C3 Sensodrive
Product Codes: 9650735480, P9650735480
Other Numbers: G 01 6105EV

Using this replacement part is often recommended in cases where the original tachometer has suffered electronic failure or mechanical damage, which may lead to inaccurate displays of speed or mileage. With our part, you will regain an accurate overview of your vehicle’s condition, contributing to the safety of your travels.

Although this is a used part, each product has undergone thorough inspection to ensure it meets all quality and functionality requirements expected by modern mechanics and technicians. This component is compatible with Citroën C2 and Citroën C3 vehicles with sensodrive technology, making this tachometer a flexible and valuable choice for your car repairs.

No more compromises on quality or functionality – with our used tachometer for Citroën, you can be confident that your vehicle will function precisely as it should.

Are you looking for a reliable tachometer for your Citroën C2 or C3? We present a used tachometer with product code 9652008180, specifically designed for the Citroën C2 and C3 model series. Whether you are a professional mechanic or enjoy repairing your own vehicle, this tachometer is the ideal choice for restoring the functionality and accuracy of your automotive dashboard system.

This particular unit has a product code of 9652008180, ensuring compatibility with specific Citroën vehicle models. The additional part designation H 01 6105EV further underlines its dedicated use for selected types of Citroën cars.

Technical Information:

Manufacturer: PSA Peugeot Citroën
Model: Citroën C2, Citroën C3
Product Codes: 9652008180, P9652008180
Other Numbers: H 01, 6105EV

Maintaining a vehicle can sometimes be challenging, but with quality and reliable parts like this tachometer, you can expect a restoration of accuracy and dependability in your car. This part is frequently replaced due to malfunctions associated with faulty speed readings or issues with the odometer, which are common problems in older vehicle models.

Whether you need a tachometer for a quick replacement or as a spare part, this product is ready to meet your functional and precision requirements. Mileage is not the key concern; what matters is the correctness and functionality of the part specifically for your vehicle. Investing in a quality used auto part like this tachometer can save you time and money compared to purchasing a new one.

Are you ready to restore full functionality to your Citroën C2 or C3? Secure this essential part today and ensure your vehicle is once again operational and precise. Order your tachometer easily and quickly right here!

When it comes to replacement, this tachometer unit can typically be replaced by removing the dashboard panel to access the component. Frequent checks are advised, especially in older models, as tachometers may fail due to electrical malfunctions or wear over time. If you’re experiencing inconsistent readings or a complete failure, replacing the tachometer is the best course of action to restore proper functionality.

Technical Information

• Manufacturer: PSA Group
• Model: Citroën C2, C3
• Product Codes: 9652008180, 6105EV
• Additional Numbers: P9652008180, G 00 6105EV

This tachometer is not only vital for accurate speed monitoring but also contributes to overall vehicle safety by providing crucial feedback to the driver regarding engine performance. Ensure you keep this component in good working order to maintain the reliability of your Citroën or Peugeot vehicle.

Are you looking for quality replacement auto parts for your Citroën C2 or C3? The Tachometer with part number 9650735480 is the ideal choice for those needing a reliable and accurate replacement for the original part. This tachometer is specifically designed for Citroën C2 and C3 models with Sensodrive transmission, ensuring perfect compatibility and functionality.

This tachometer easily displays your vehicle’s current speed, along with other important operational information. Even though it is used, it has been carefully inspected to provide the most accurate data, which is crucial for safe and smooth driving.

Technical Information:
Manufacturer: PSA CITROEN PEUGEOT
Model: Citroën C2, Citroën C3
Product Codes: 9650735480, P9650735480, G 01 6105EV
Other Numbers: Not available

By purchasing this tachometer, you not only gain functionality but also assurance of quality and long-lasting service life due to its robust design specific to Citroën vehicles. This part is ideal for auto mechanics or DIY enthusiasts looking to save costs on expensive new parts without compromising on quality and performance. Whether you are a professional or an amateur, this tachometer will meet your expectations and help keep your Citroën in top condition.

Installation of the tachometer is straightforward and can be performed with common tools, making it an ideal project for the weekend mechanic. We recommend having basic knowledge of your vehicle’s electrical systems for successful installation. With this tachometer, you will quickly and efficiently restore the functionality and aesthetics of your dashboard. Get this essential part today and ensure a smooth and accurate ride!

Are you looking for a reliable odometer for your Citroën C2 or Citroën C3? Our used odometer with product code 9652008180 is exactly what you need. It comes from a Citroen C2 1.4 HDI model and shows a mileage of 172,000 km, which is a testament to the regular and professional maintenance of the vehicle.

This odometer is an ideal choice for Citroën owners seeking a replacement part that ensures accurate and reliable speed and distance readings. Installation is straightforward and does not require significant modifications to the vehicle, which both professional auto mechanics and experienced DIY enthusiasts will appreciate.

Technical Information
Manufacturer: Citroën
Model: Citroën C2, Citroën C3
Product Codes: 9652008180, 6105EV
Other Numbers: P9652008180 H 01

This odometer is not only practical but also contributes to the aesthetics of the vehicle’s interior. With a modern gauge design, it will look great on your car’s dashboard. It provides not only basic functions such as measuring speed and distance but also enhances the visual aspect of your automotive interior.

If you are looking for a high-quality and reliable odometer for your Citroën C2 or C3, this product is the perfect choice. Ensure you use original auto parts that prolong the lifespan of your vehicle and guarantee hassle-free functionality. Don’t wait and order today, so you can travel safely and accurately again!

This tachometer is specifically designed for Citroën C2 and C3 models equipped with the 1.4 HDi diesel engine. It accurately displays mileage, with a current reading of 189,000 kilometers, ensuring precise monitoring of your vehicle’s distance traveled. Essential for both professional mechanics and DIY enthusiasts, this component maintains the integrity of your car’s dashboard electronics.

Function and Importance

The tachometer plays a crucial role in providing real-time data on vehicle speed and engine RPM, which helps optimize driving efficiency and engine performance. A faulty or inaccurate tachometer can lead to poor vehicle diagnostics or driving habits, so replacing it with a compatible and quality part is vital.

Installation and Maintenance

Replacing the tachometer in Citroën C2 and C3 models is straightforward for those familiar with vehicle electronics and dashboard removal procedures. Typically, the process involves disconnecting the battery, carefully removing the dashboard cluster, swapping the tachometer unit, and reconnecting all components. Regular checks and timely replacements extend the lifespan of your vehicle’s instrumentation and contribute to safer driving.

Technical Information

• Manufacturer: PSA Group (Citroën / Peugeot)
• Model Compatibility: Citroën C2, Citroën C3 (1.4 HDi engine)
• Product Codes: 9652008280, 6105EV, P9652008280 H 01
• Additional Numbers: N/A