Original tachometer (dashboard, alarms) for Citroën C2 / C3 / C3 Pluriel. This is a used, fully functional part taken from a Citroën C3 1.1i car, year 2003. Ideal replacement for non-functional alarm clocks – replacement piece for piece. Actual mileage approx. 125,000 (informative; see note on synchronization with BSI below).

Key OE/PSA numbers and markings
– 9650735480, P9650735480
– Index E 00 / H 00
– 6104.ZJ, 6105.EV (6104ZJ, 6105EV)
Compare these numbers to your original part – they are essential for correct compatibility.

Compatibility
– Citroën C2 (2003–2009)
– Citroën C3 I, the so-called first generation (2002–2009)
– Citroën C3 Pluriel (2003–2010)
Note: Always verify compatibility by OE numbers and connector designs. Instrument panel variants may differ for different equipment.

Technical information
– Type: dashboard / tachometer with analog alarms (speedometer, tachometer, fuel gauge, temperature) and central display
– Vehicle network: PSA multiplex (VAN/CAN depending on vehicle equipment)
– Power supply: 12 V
– Connector interface: PSA multi-pin serial (compare physically with your part)
– Mileage status: approx. 125,000 km stored in alarms (approximate)
– Original PSA part, suitable for petrol and selected diesel variants according to coding

Assembly and coding
– Exchange is usually plug & play; with some equipment, the basic configuration of variants (language, units, on-board computer, etc.) may be required via PSA diagnostics (Lexia/DiagBox).
– For PSA cars, the number of kilometers driven is stored in the BSI and in the instrument panel. The higher of the two values ​​is usually set after first power-up. Consider this when replacing.
– Before assembly, disconnect the battery, after assembly, perform a function check via diagnostics.

Status and Verification
– Used part, fully functional, tested before disassembly.
– Normal cosmetic wear without affecting function; condition see photo.
– We recommend comparing: part numbers, index (E 00 / H 00), alarm layout and connectors.

Why choose this part?
– Original PSA quality – accurate display and communication with BSI.
– Quick solution to problems such as non-functioning backlight, display outages, incorrect indicators.
– A financially advantageous alternative to a new part.

Package contents
– 1× speedometer/instrument panel Citroën C2/C3/C3 Pluriel, OE 9650735480 (P9650735480), index E 00/H 00, PSA 6104.ZJ / 6105.EV.

Tip for car mechanics
– Before ordering, compare the described OE number from the original alarm clock with the offered piece.
– After assembly, check variant coding with diagnostics and adjust if necessary (e.g. km/h units, display configuration).

Search Terms (SEO)
Citroën C2 Speedometer, Citroën C3 Alarms, C3 Pluriel Dashboard, 9650735480, P9650735480, 6104.ZJ, 6105.EV, C2 C3 Speedometer, Citroen Alarm Panel, Used PSA Auto Parts

Replacing the Tachometer is essential when it fails, typically due to wear and tear from regular use. It directly impacts your vehicle’s performance by providing accurate speed readings, which is critical for safe driving. Periodic checks of the tachometer are recommended to ensure proper functioning, especially if you notice inconsistencies in speed readings.

Technical Information

• Manufacturer: SAGEM
• Model: Citroën C2/C3 Sensodrive
• Product Codes: 9650735580
• Other Numbers: 6104ZJ, 6105EV

This SAGEM instrument cluster is a direct-fit tachometer assembly for Citroën C2 and Citroën C3 models equipped with the Sensodrive gearbox. Ideal for professional workshops and experienced DIY mechanics, the unit is commonly searched by OEM part numbers and reference codes (see Technical Information). The cluster shows odometer and instrument readings accurately and is suitable for replacing a faulty or visually damaged dashboard gauge set. Searching by product code (e.g. 9650735580 or 6104ZJ) is a fast way to find this part in service listings and inventories.

Technical Information

• Manufacturer: SAGEM / Citroën (Stellantis)
• Model: Citroën C2, Citroën C3, Citroën C3 Pluriel
• Product Codes: 9650735580, P9650735580, 6104ZJ, 6105EV
• Other Numbers: G01; Mileage On Unit: 146000 km

Compatibility And Application

Fits Citroën C2 and C3 vehicles with the Sensodrive transmission layout. Also compatible with certain Citroën C3 Pluriel configurations that use the same SAGEM instrument cluster. Verify fitment by matching the part codes listed above against the original unit found in the vehicle. This cluster is commonly exchanged when needle movement, backlighting, or odometer display faults occur.

Replacement Procedure

Basic replacement steps for experienced technicians or competent DIYers:

• Disconnect the negative battery terminal before beginning work to avoid electrical damage.
• Remove surrounding trim panels and steering column shrouds as required to access the cluster.
• Unscrew the instrument cluster retaining screws and carefully pull the unit forward enough to reach the electrical connectors.
• Release connector latches and disconnect all plugs. Inspect connector pins for corrosion or damage.
• Install the replacement cluster by reconnecting plugs, refitting screws and trim, then reconnecting the battery.
• After installation, check all functions: illumination, warning lights, needle movement, odometer display and interaction with other vehicle systems.

Installation Recommendations

• Always disconnect the battery and follow manufacturer service procedures to prevent damage to electronic components.
• Handle the cluster by its housing; avoid touching circuit boards or connectors directly to reduce ESD risk.
• Check connector condition and wiring harness for signs of wear, corrosion or rodent damage before refitting.
• If the replacement unit shows different mileage or does not communicate correctly with vehicle systems, professional diagnostic equipment may be required to adapt or program the cluster.
• For reliable results, installation and any necessary coding or adaptation should be performed by a qualified technician with access to PSA diagnostic tools (e.g., DiagBox).

Why This Part Fails Most Often

• Age-Related Electronic Failures: Component wear such as failing capacitors, deteriorating solder joints or faulty stepper motors for the needles.
• Moisture Ingress: Water or condensation can cause shorts, corrosion of contacts and display malfunctions.
• Electrical Surges: Voltage spikes from poor charging system components or jump-starts can damage internal electronics.
• Connector And Wiring Issues: Loose, corroded or damaged connectors and harnesses lead to intermittent faults or complete loss of functions.
• Backlight Or Display Degradation: LED/backlight failures or pixel problems in the display area reduce visibility and usability.

Designed for workshop replacement and commonly searched by part numbers 9650735580 and 6104ZJ, this instrument cluster is a practical solution for restoring dashboard functionality on compatible Citroën C2 and C3 vehicles.

Product Details:
The Sagem tachometer is specifically suited for the following Citroën models: C2 and C3. Typically, these components can fail due to electrical issues or wear over time, leading to inaccurate readings. Replacing the tachometer not only resolves these issues but also enhances the overall driving experience.

Installation of this tachometer is straightforward and can be performed by auto mechanics or DIY enthusiasts. Simply disconnect the old tachometer and replace it with this new unit, ensuring all connections are secure and properly aligned.

Technical Information

• Manufacturer: Sagem
• Model: Citroën C2, C3
• Product Codes: 9650735580, 6104ZJ
• Additional Numbers: 6105EV

This tachometer not only maintains accurate speed information but also assists in monitoring engine performance, which is vital for ensuring your vehicle runs efficiently.