The starter motor plays a critical role in the ignition process by converting electrical energy from the battery into mechanical energy to crank the engine and initiate combustion. This particular unit features a 12-volt operating voltage, a power rating of 1.3 kW, and 9 teeth on the pinion gear, which mesh precisely with the flywheel to ensure smooth engagement. The rotation direction is clockwise, and the starter’s position and inclination are specified as right (R 55), important for correct installation in the engine bay.

Replacement of the starter is typically required when symptoms such as slow engine cranking, unusual noises during start-up, or complete failure to start occur. Common causes of starter failure include worn brushes, damaged pinion gear, defective solenoid, or electrical supply issues. Installation involves disconnecting the battery, removing the faulty starter by detaching mounting bolts and electrical connectors, and fitting the new starter in place before reconnecting all components.

Technical Information

• Manufacturer: CARGO
• Models Compatible: Citroën Berlingo, C3, C4, Saxo, Nemo, Xsara, Xsara Picasso; Peugeot 1007, 106, 206, 306, 307, Partner
• Product Codes: 5802C9, 5802CG, 5802EP, 5802M9, 5802P8, 5802R4, 5802E8, 5802C2, 5802CC, 5802Q1, 5802C6
• Other Numbers: PSA Part Number 9648644680
• Technical Specs: Voltage: 12 V; Power: 1.3 kW; Teeth Number: 9; Rotation Direction: Clockwise; Position/Slope: Right (R 55); Terminal Type: Non-standard (NON)

Premium Valeo Starter Motor Designed For Reliable Engine Cranking On Small-Displacement Petrol Engines. This Starter Is A Direct-Fit Replacement For Many Citroën And Peugeot Models, Matching OEM Reference 9648644680 And Multiple Cross-Reference Codes. Built To Withstand Urban Driving And Frequent Cold-Starts, It Delivers Consistent Engagement And Durable Operation For Professional Garages And Experienced DIYers.

Compatibility

Suitable For The Following Models And Engine Types:

• Citroën C-Elysée
• Citroën C2
• Citroën C3
• Citroën C3 Pluriel
• Citroën Xsara Picasso
• Peugeot 206
• Peugeot 206+
• Peugeot 207
• Peugeot 301

Engine Compatibility: 1.1i, 1.4i, 1.4 16V, 1.6i, 1.6 16V.

Technical Information

• Manufacturer: Valeo
• Model(s): Citroën / Peugeot Small Petrol Engines (1.1i, 1.4i, 1.6i; 1.4 16V, 1.6 16V)
• Product Codes: 9648644680
• Other Numbers: 5802C9, 5802CG, 5802EP, 5802M9, 5802P8, 5802R4, 5802E8, 5802C2, 5802CC, 5802Q1, 5802C6, D6G3

Function And Common Symptoms

The Starter Motor Converts Electrical Energy From The Battery Into Mechanical Rotation To Crank The Engine Until Combustion Begins. Typical Symptoms Indicating Starter Wear Or Failure Include:

• Single Click Or Rapid Clicking When Turning The Key
• Engine Does Not Turn Over Despite Good Battery Voltage
• Slow Cranking Or Intermittent Engagement
• Grinding Noise During Engagement (Indicative Of Worn Bendix Or Flywheel Teeth)

Why The Part Usually Fails

Starter Motors Are Subject To Mechanical And Electrical Stress. The Most Common Causes Of Failure Are Worn Brushes And Commutator, Faulty Solenoid Or Bendix Mechanism, Corrosion And Moisture Ingress, Overheating From Repeated Starts, Or Degraded Connections And Poor Battery/Charging System Condition. Harsh Urban Use With Many Short Trips Accelerates Wear.

Installation Recommendations

Follow These Guidelines For Safe And Reliable Replacement:

• Disconnect The Negative Battery Terminal Before Any Work To Prevent Short Circuits Or Accidental Engagement.
• Raise And Secure The Vehicle On Jack Stands If Necessary. Support The Engine If Required By The Vehicle Procedure.
• Locate The Starter On The Engine Bellhousing, Disconnect The Electrical Connections (Battery Feed And Solenoid Signal) And Remove Mounting Bolts.
• Compare The Replacement Starter With The Old Unit To Confirm Mounting, Electrical Terminals, And Rotation Direction Match.
• Fit The New Starter, Tighten Mounting Bolts Securely, Reconnect Electrical Wires Making Sure All Connections Are Clean And Tight.
• Reconnect The Battery, Start The Engine And Verify Smooth Engagement Without Unusual Noise. Check Charging System If Cranking Remains Weak.
• Where In Doubt, Use A Workshop Manual For Model-Specific Steps And Torque Values, Or Have The Installation Performed By A Qualified Technician.

Durability And Service Advice

Service Life Varies With Driving Style And Environment. Under Typical Conditions Starters Often Last Many Years, But Heavy City Use And Frequent Cold Starts Reduce Lifespan. To Prolong Service Life, Keep Battery And Charging System In Good Condition, Protect Electrical Connections From Corrosion, And Avoid Prolonged Starter Engagement.

Why Choose This Starter

This Valeo Starter Matches Common OEM References For Citroën And Peugeot Small Petrol Engines, Making It A Practical Choice For Professional Repair Shops And Skilled DIY Mechanics Looking For A Direct-Fit Replacement That Restores Reliable Starting Performance.

Bosch Starter 0001112041 (OE 9647982880) is a direct-fit 12V starter motor suitable for a range of Citroën and Peugeot petrol models. Designed for workshop use and DIY repairs, this starter is a common replacement part searched by OE and Bosch reference numbers. If your vehicle cranks slowly, makes grinding noises or fails to turn the engine over, this starter is a frequently used replacement that restores reliable starting performance.

Technical Information

• Manufacturer: Bosch
• Model: Citroën Berlingo, Citroën C2, Citroën C3, Citroën C3 Pluriel, Citroën C4, Citroën Xsara, Citroën Xsara Picasso, Peugeot 1007, Peugeot 206, Peugeot 307, Peugeot Partner
• Product Codes: 0001112041, 1112041
• Additional Numbers: 9647982880, 5802M9, 5802EP
• Voltage: 12 V

Application

Fits a variety of small to medium PSA petrol engine models from Citroën and Peugeot. Commonly referenced by OE numbers and Bosch codes, this starter is often looked up by part number when searching for a replacement for Berlingo, C2, C3 (including Pluriel), C4, Xsara, Xsara Picasso, 1007, 206, 307 and Partner models.

Function

The starter motor converts electrical energy from the battery into mechanical rotation to crank the engine. When you turn the ignition key, the starter solenoid engages the pinion gear with the engine’s flywheel (ring gear) and spins the crankshaft until combustion begins. The solenoid also switches the high current needed by the starter motor.

How To Replace

1. Disconnect the negative battery terminal before any work to prevent short circuits.
2. Raise and safely support the vehicle if access is required from underneath; remove any undertray or heat shield blocking the starter.
3. Disconnect electrical connections at the starter (battery cable and control wire) and note their routing.
4. Support the starter, remove the mounting bolts and withdraw the unit from the bellhousing.
5. Compare new and old starter to confirm matching mounting points and electrical terminals.
6. Install the replacement starter, tighten mounting bolts to the manufacturer’s torque specification, reconnect electrical connections and reinstall shields/undertray.
7. Reconnect the battery and test starting operation. Listen for smooth engagement and absence of unusual noises.

Installation Recommendation

• Always disconnect the battery before starting work. Observe good workshop safety practices.
• Check battery condition, charging system and ground connections—weak battery or corroded connectors often masquerade as starter faults.
• Inspect flywheel/ring gear teeth and the starter mounting faces for damage or excessive wear before installation.
• Use correct tools and torque values from the vehicle workshop manual when tightening mounting bolts.
• After fitting, perform a start test and verify there are no electrical voltage drops under load.

Why The Part Most Often Fails

• Wear Of Internal Components: Brushes, commutator and bearings wear with mileage and age, reducing performance.
• Solenoid Failure: The solenoid contact or plunger can stick or fail, preventing pinion engagement or electrical feed to the motor.
• Contamination: Oil ingress from leaky seals or coolant contamination can damage the starter internals.
• Heat And Vibration: Prolonged exposure to high underbonnet temperatures and vibration shortens component life.
• Electrical Issues: Weak battery, poor earths or corroded terminals cause high voltage drop and premature starter wear.

Searchable by OE and Bosch numbers (e.g. 0001112041, 9647982880, 5802M9, 5802EP), this starter is a practical replacement option for garages and DIY enthusiasts who require a reliable, direct-fit component for Citroën and Peugeot vehicles.

The starter is an essential component responsible for cranking the engine to initiate ignition. Failure of the starter can result in difficulties starting the vehicle, often causing inconvenient situations especially during urgent departures.

Purchasing this MITSUBISHI starter offers a reliable and cost-effective alternative to original parts without compromising performance. It is built to deliver consistent and durable functionality, ensuring your vehicle starts smoothly every time.

Technical Information

• Manufacturer: MITSUBISHI
• Model Compatibility: CITROËN Berlingo, C2, C3, C4, Saxo, Nemo, Xsara, Xsara Picasso; PEUGEOT 1007, 106, 206, 306, 307, Partner and more
• Product Codes: M000T45071ZT, 5802C9, 5802CG, 5802EP, 5802M9, 5802P8, 5802R4, 5802E8, 5802C2, 5802CC, 5802Q1, 5802C6
• Other Codes: 9656317780

This starter fits a wide range of Citroën and Peugeot models, making it an ideal choice for both professional mechanics and DIY enthusiasts. Due to the complexity of starter replacement, we recommend installation by a qualified technician to ensure optimal performance and reliability.

Whether you are a seasoned mechanic or a car owner repairing your own vehicle, this MITSUBISHI starter is a perfect solution to restore your vehicle’s engine-starting function economically and efficiently.

Do not let a faulty starter limit your mobility. With this dependable MITSUBISHI starter, you benefit from excellent value, proven quality, and long-lasting service life.

The VALEO CL7 alternator is a direct-fit charging unit intended for PSA group vehicles (Citroën and Peugeot) equipped with 1.1, 1.4 and 1.6 petrol engines. This used unit has been carefully tested and inspected for correct fitment and reliable electrical performance. It supplies charging current to the battery and powers onboard electrical systems to ensure proper starting and vehicle operation.

Key Benefits

• Direct-fit replacement for selected Citroën and Peugeot models with OEM cross-reference codes.
• Robust construction designed for everyday driving demands and stable voltage regulation under load.
• Suitable for professional workshops and competent DIY mechanics who require a proven charging solution.

Applications

Commonly fitted to Citroën C2, Citroën C3 and Peugeot 206, Peugeot 307, and other PSA vehicles using the listed part references. Always verify vehicle and engine codes before ordering to confirm compatibility.

Installation Guide

• Safety first: disconnect the negative battery terminal to prevent short circuits.
• Remove the engine cover (if fitted) and release belt tensioner to remove the drive belt.
• Disconnect electrical connectors and battery cable from the alternator.
• Unbolt the alternator mounting fasteners and remove the unit from the engine bay.
• Install the replacement alternator in reverse order: secure mountings, reconnect electrical plugs and cables, refit the belt and reconnect the battery.
• After installation, start the engine and confirm correct charging voltage (typically around 13.8–14.6 V) and absence of warning lights or unusual noises.

Common Failure Modes & Service Life

Alternators typically last many years but can fail due to worn bearings, deteriorated brushes, voltage regulator or diode pack faults, contamination, or excessive belt slip. Typical service life varies with use and environment; many units reach 100,000–150,000 miles (160,000–240,000 km) before replacement is required. Symptoms of a failing alternator include battery warning lamp illumination, dimming or flickering lights, slow engine cranking, battery drain, and grinding or whining noises.

Technical Information

• Manufacturer: Valeo
• Model: CL7
• Product Codes: 9642879980, SG7S015, 57055T, 5705GN, 1638094280
• Other Numbers: PSA Citroën Peugeot 9642879980, SG7S015, 57055T, 5705GN, 1638094280

Notes For Buyers

This alternator is offered as a quality replacement option for technicians and experienced DIY enthusiasts. Confirm the OEM or aftermarket cross-reference numbers against your vehicle registration or VIN before purchase. If you are unsure about fitment or installation, consult a qualified mechanic to avoid electrical damage.