Product Overview

High-quality Valeo rear wiper motor designed as a direct-fit replacement for a range of Stellantis vehicles. This motor restores reliable rear-wiper operation and is commonly sought under OE and supplier references (e.g. 9680477480, 53031812, 6405JQ). Ideal for professional workshops and experienced DIY mechanics who need a robust, OEM-compatible unit.

Key Benefits

• Direct fit for Citroën C4 II (B7) and multiple Peugeot models, reducing installation time.
• Reliable drive and gearset designed for automotive exterior applications.
• Improves visibility and safety by restoring rear-wiper function.
• Frequently Identified By Part Numbers: 9680477480 / 53031812 / 6405JQ — use these when searching or ordering.

Technical Information

• Manufacturer: Valeo
• Model: Citroën C4 II (B7); Peugeot 308 SW and 308 Hatchback (2010); Peugeot 3008 I; Peugeot 5008 I
• Product Codes: 9680477480, 53031812, 6405JQ
• Additional Numbers: 53031812 | 6405.JQ | 6405JQ | 9680477480

Installation Recommendations

Recommended For Experienced Mechanics And Skilled DIYers. Typical replacement steps:

1. Park vehicle on level ground and switch ignition off.
2. Disconnect the negative battery terminal to prevent short circuits and accidental activation.
3. Remove interior tailgate trim to access the rear wiper motor and linkage—retain clips and screws for reassembly.
4. Disconnect the electrical connector and unbolt the motor from the tailgate.
5. Separate the motor from the wiper linkage; inspect linkage and spindle for wear or corrosion.
6. Fit the replacement motor, reconnect the electrical connector, and loosely mount bolts to check park position and travel before final torquing.
7. Reassemble trim, reconnect battery, and test full wiper function (intermittent, park position, and return to rest).

Always Follow Manufacturer Torque Values And Reassembly Order. Avoid operating the wiper on frozen glass—this can overload the motor and linkage.

Why This Part Fails

• Water Ingress And Corrosion: Rear wiper motors are exposed to moisture; seals can fail allowing water to reach gears and electrical parts.
• Brush And Commutator Wear: Over years of use, brushes wear down and motor performance degrades.
• Mechanical Overload: Attempting to operate the wiper when frozen or jammed can strip gears or overload the motor.
• Linkage Wear Or Seizure: Worn joints or seized linkage increase load on the motor and accelerate failure.

Practical Tips

• Inspect And Lubricate Linkage During Replacement To Extend Service Life.
• Check Tailgate Seals And Drain Channels To Prevent Water Accumulation.
• If The Wiper Stalls Or Moves Erratically, Check Connector Voltage And Ground Before Replacing The Motor.

Compatibility Note

The unit is intended as a replacement for the models listed above. Many customers search using part numbers 9680477480, 53031812 or 6405JQ—use these codes to confirm fitment in catalogs and parts lists.