Original used ABS ATE module for Peugeot 206 cars. This is a complete ECU unit + hydraulic block/pump (so-called “ABS cube”). The part is fully functional, it only has a cracked plastic cover, which does not affect the operation of the unit. Cabling is also part of the sale. The ideal solution for a quick and cost-effective repair compared to a new part.

The ABS module ensures the regulation of brake pressure so that the wheels do not lock up during intensive braking. The fault is typically manifested by an illuminated ABS warning light, pump/valve/pressure sensor error codes, or irregular ABS function. With these units, wear and tear of the pump’s electric motor, cold joints or mechanical damage to the cover is a frequent cause of malfunctions. By choosing an original ATE part, you will maintain proper function and compatibility with the rest of the brake system.

Compatibility: intended for selected versions of the Peugeot 206 with ABS system ATE. Always compare the label numbers of your original unit and the shape/connector before purchasing. Code matching is key for trouble-free installation and functionality without additional modifications.

Assembly and recommendations
– Disconnect the battery before disassembly.
– The unit is usually mounted on a bracket in the engine compartment; when replacing the hydraulic block, it is necessary to disconnect the brake pipes and carefully vent the entire system after assembly.
– It is recommended to carry out service venting via diagnostics (activation of pump/valves).
– Depending on the vehicle equipment, remote coding/configuration of the unit (DiagBox/PP2000) and clearing of fault codes may be required.
– Work cleanly, protect the hydraulic circuits from dirt and make sure that the brake lines are correctly tightened.

Technical Information

• Manufacturer: ATE (Continental Teves)
• Model: Peugeot 206 (selected versions with ABS ATE)
• Product codes: 9659136980, 10.0207-0130.4, 10.0970-1149.3
• Other numbers: 4541V5, 4541V6, 4541RW, 4542J8, 4542Z0, 4542J9

Part condition: used, fully functional, plastic cover cracked (cosmetic defect), supplied with wiring. Always compare the numbers above with your original unit to ensure compatibility.

This ABS ECU (electronic control unit) and pump assembly is a direct-fit unit for Peugeot 206 models equipped with the 1.4 HDi 50 kW engine. Supplied with the wiring harness, it matches original PSA/ATE specifications and is commonly referenced by part numbers such as 9652342980 and 10.0207-0036.4. Customers often search by these codes, so this listing includes the most relevant references to help you find the correct unit quickly.

Key Features

• Complete ABS control module and hydraulic pump assembly (ATE style)
• Includes wiring harness for straightforward installation
• Direct replacement for compatible Peugeot 206 1.4 HDi vehicles
• Identified by multiple PSA/ATE part codes for easy lookup

Fitment And Application

Designed for Peugeot 206 1.4 HDi 50 kW. Compatible with PSA platforms using ATE ABS units. Always verify part numbers against your vehicle VIN or the unit currently fitted to ensure correct match.

Replacement And Installation Notes

Replacement should be carried out by a qualified technician or an experienced DIY mechanic. Typical installation steps include disconnecting the battery, removing the old ABS unit and pump assembly from the engine bay (usually mounted to the brake servo or inner wing area), transferring any required brackets or sensors, connecting the supplied wiring harness, and securely mounting the unit. After mechanical installation, it is necessary to bleed the brake system thoroughly to remove air from the hydraulic circuit. A diagnostic tool (for example PSA DiagBox or a compatible OBD2/ABS scanner) may be required to clear fault codes and, in some cases, to configure or adapt the new ABS module to the vehicle.

Common Failure Modes And Maintenance

ABS modules can fail due to electrical faults, corrosion of electrical connections, moisture ingress, or wear of the hydraulic pump motor and internal valves. Symptoms include ABS warning light illumination, loss of ABS function, unusual brake pedal feel, or persistent fault codes related to wheel speed sensors or pump circuits. Regular inspection of connectors and brake hydraulics helps reduce risk of premature failure.

Why Buy This Unit

This listing includes the wiring harness and references multiple manufacturer codes, making it a practical choice for workshops and DIY enthusiasts who need a reliable replacement that fits directly without major modifications. Including the correct part codes in your search improves the chance of immediate compatibility.

Technical Information

• Manufacturer: PSA (Peugeot/Citroën) / ATE
• Model: Peugeot 206 1.4 HDi 50 kW
• Product Codes: 9652342980, 10.0207-0036.4, 10.0970-1114.3
• Other Numbers: 4541V5, 4541V6, 1682608780, 4541RW, 4542J8, 4542Z0, 4541J9

Please verify the part numbers and connector types against your vehicle before purchase. If you are unsure about coding or diagnostic steps after installation, consult a professional workshop with PSA diagnostic capability to ensure full system operation and safety.