The ABS and ESP control unit is crucial for the proper operation of your vehicle’s braking system, ensuring optimal performance and safety during braking under various driving conditions. This module manages the communication between the ABS system, which prevents wheel lockup during sudden braking, and the ESP system, which helps maintain vehicle stability and proper driving path.

Technical Information:

Manufacturer: PSA Citroën Peugeot
Model: Peugeot 206 1.6 16V 80kW
Product Codes: 9650222880, 10.960-1135.3, 10.0206-0118.4, 1682609780, 4541V7, 4541V8, 4542K1, 4542K0

Proper functioning of ABS and ESP systems is vital for your safety on the road. Install this ABS ESP control module in your Peugeot 206 to ensure your car remains safe and reliable on every drive. This part is ready for immediate delivery and installation.

This ABS/ESP control unit and pump assembly is specified for the Peugeot 206 and carries common PSA/ATE part references. The component combines the hydraulic ABS pump, electronic control unit (ECU) and associated wiring harness to manage anti-lock braking and electronic stability control functions. Ideal for professional workshops and experienced DIY mechanics searching by product number for a precise replacement.

Key Features

• Complete ABS & ESP module including pump motor, hydraulic block and ECU electronics.
• Includes wiring harness for direct connection to the vehicle loom.
• Commonly referenced by multiple PSA and ATE part numbers for accurate fitment lookup.
• Designed to control wheel anti-lock operation and support stability/brake interventions under dynamic conditions.

Function And Symptoms

The unit regulates brake pressure modulation during ABS events and interfaces with the ESP system to apply selective braking for vehicle stability. Typical fault indicators include illuminated ABS and/or ESP warning lights, loss of ABS function under braking, unusual brake pedal feel (pulsation or sponginess), or stored fault codes visible with a diagnostic tool.

Common Fault Causes

• Electrical issues such as connector corrosion, broken wiring or internal ECU component failure.
• Hydraulic problems including pump motor failure, valve sticking or contamination from degraded brake fluid.
• Ingress of moisture or corrosion on the hydraulic block or electronic module.
• Thermal stress and age-related wear on internal components.

Replacement And Installation Notes

Replacing the ABS/ESP module requires careful work on the brake hydraulic system and vehicle electrics. Typical replacement steps:

• Disconnect the negative battery terminal before starting to avoid electrical damage.
• Read and record ABS/ESP fault codes and module adaptations with a compatible diagnostic tool.
• Protect the brake system: prepare to capture any brake fluid leakage and avoid introducing air into the circuit.
• Unplug electrical connectors and remove mounting bolts securing the hydraulic block and ECU.
• Fit the replacement unit, reconnect electrical connectors and re-secure hydraulic lines using correct torque values.
• Bleed the brake system thoroughly to remove air; perform ABS pump activation and system tests with diagnostics.
• On many PSA vehicles, final coding or adaptation of the ABS/ESP module may be required using a suitable diagnostic interface to ensure full functionality.

When To Replace

Replace the assembly if persistent ABS/ESP warning lights are present and diagnostics point to the hydraulic block or ECU as the fault, if the pump motor does not operate, or if hydraulic leaks and corrosion are evident. Regular maintenance of the braking system and periodic replacement of brake fluid can reduce the risk of hydraulic contamination and premature failure.

Technical Information

• Manufacturer: PSA Group (Citroën, Peugeot)
• Model: Peugeot 206
• Product Codes: 9659137080, 10.0960-1157.3, 10.0206-229.4
• Other Numbers: 4542K0, 4542V7, 4542E1, 4541F1, 45420

If you are matching by part number, verify the listed codes against your vehicle reference before ordering. This assembly is commonly sought under the referenced PSA and ATE numbers; using the exact product code will help ensure correct fitment for Peugeot 206 vehicles.

This ABS/ESP control unit (ECU) is a combined hydraulic pump and electronic module originally used on Peugeot 206 vehicles. The complete assembly includes the ABS/ESP control electronics and hydraulic block; the listing specifies that wiring is supplied with the unit. The part is commonly identified by the manufacturer part number and OEM codes shown below, so customers frequently search using those numbers.

Key Features

• Combined ABS and ESP control module with hydraulic pump.
• Supplied with wiring harness.
• OEM reference and cross-numbers included for easy verification.
• Designed for fast replacement by experienced technicians; suitable for independent garages and DIY enthusiasts comfortable with braking system work.

Compatibility & Fitment

Common fitment: Peugeot 206, typically the 1.4 16V versions. Compatibility should always be verified against the vehicle VIN or original part number. This unit is associated with PSA Citroën/Peugeot platforms—use the product codes below to confirm exact match with your vehicle.

Replacement And Installation Notes

Replacing the ABS/ESP unit requires basic mechanical skills and appropriate diagnostic tools. Typical replacement steps:

• Disconnect the vehicle battery before starting work.
• Locate the ABS/ESP module and unplug electrical connectors and brake lines (prepare to contain brake fluid).
• Unbolt and remove the old unit, install the replacement, reconnect lines and connectors, and secure mounting bolts to the correct torque.
• After installation, the brake system must be bled to remove air from the hydraulic circuit.
• Vehicle adaptation or coding of the new ABS/ESP module may be required using a compatible diagnostic tool (e.g., manufacturer-level diagnostic interface). If unsure, consult a professional workshop.

Common Failure Modes

• Electrical faults caused by connector corrosion or water ingress.
• Internal pump or valve wear leading to reduced braking performance or warning lights.
• Sensor or wiring issues that can cause the ECU to register faults even if the hydraulic unit is serviceable.

Symptoms of a failing unit include ABS or ESP warning lights on the dash, inconsistent brake pedal feel, or degraded traction/stability control functions.

Why Buy This Unit

This listing provides a complete ABS/ESP assembly identified by original part references, making it easier to match and replace a faulty module. Supplying the wiring harness simplifies installation and reduces the number of additional parts required.

Technical Information

• Manufacturer: PSA (Citroën / Peugeot)
• Model: Peugeot 206 1.4 16V
• Product Codes: 9649026980
• Other Numbers: 10.0960-1127.3, 10.0206-0102.4, 4541V7, 4542K0

Before purchase, always verify that one of the listed product codes or other numbers matches the number on your original unit. If in doubt, consult your VIN or contact a qualified technician for confirmation.

ABS & ESP control unit with integrated hydraulic pump (ATE) designed for Peugeot 206. This unit combines the electronic control module and hydraulic modulator to manage anti-lock braking (ABS) and electronic stability program (ESP) functions. Supplied with wiring harness and original part references for straightforward identification.

Key Functions

The module monitors wheel speed sensors and modulates brake pressure at each wheel to prevent lock-up and help maintain vehicle stability. The integrated pump restores hydraulic pressure when required, while the control electronics execute ABS and ESP interventions during emergency braking or traction loss.

Compatibility And Fitment

Main fitment: Peugeot 206 1.6 HDi (80 kW). Check the part numbers below to confirm compatibility with your vehicle before purchase. The unit is supplied with the associated wiring harness to simplify installation and connection.

Installation Notes

Basic replacement steps (recommended for professional mechanics or experienced DIYers): disconnect the vehicle battery; access the ABS/ESP unit in the engine bay; unplug electrical connectors and remove mounting bolts; carefully disconnect hydraulic lines (expect brake fluid loss); install the replacement unit, reconnect hydraulic lines and electrical connectors; refill and bleed the braking system. After installation, perform a diagnostic scan to clear fault codes and run any necessary initialization or calibration routines.

Common Faults And Causes

Typical Symptoms: ABS or ESP warning lights on the dash, intermittent braking pulsation, loss of ABS function, or reduced stability control intervention.

Common Causes: electrical connector corrosion or poor contact, water ingress, failed pump motor or valves in the hydraulic unit, internal electronic faults, or associated wheel speed sensor failures. Longevity depends on vehicle use and environmental exposure; moisture and corrosion are frequent contributors to module failure.

Recommendations

Inspect wheel speed sensors and wiring when diagnosing ABS/ESP faults to rule out sensor-related triggers. Replace brake fluid if contaminated. Use a professional diagnostic tool after replacement to ensure the unit is properly recognized and any required initialization procedures are completed.

Technical Information

• Manufacturer: PSA Citro&ebreve;n Peugeot / ATE
• Model: Peugeot 206 1.6 HDi 80 kW (With Wiring Harness)
• Product Codes: 9655960880
• Other Numbers: 10.960-1151.3, 10.0206-0194.4, 4541V7, 4542K0

If you are unsure about compatibility, compare the part numbers on your existing unit or consult a professional workshop. Proper installation, bleeding of the brake system and a diagnostic initialization will ensure reliable operation of ABS and ESP functions.