Main product description
Original Peugeot 206 rear light seal kit – OEM PSA 6350FP (6350.FP). The ideal solution if your trunk is leaking, your taillights are fogging, or the original foam seal is hardened and leaking. This is an original used part from disassembly, carefully inspected, crack free and ready for assembly. The part is listed in the PSA network as NFP (No Further Production – no longer produced), therefore the original from secondary production is difficult to obtain.

Key benefits
– Stops water from entering the luggage compartment and reduces the risk of corrosion and oxidation of the lamp connectors
– Shape-accurate seal for left and right rear light (L + P set)
– The original material and profile guarantee a correct fit without the need for sealants
– Quick replacement without special tools, suitable for car mechanics and home repairmen

Compatibility
– Peugeot 206, year of manufacture approx. 1998–2009
– Suitable for standard rear lamps (3/5d hatchback; for other body versions, check compatibility by VIN and lamp shape)
– Not sure? Submit VIN – compatibility verification recommended

Technical information
– OEM/PSA Part Number: 6350FP (6350.FP), PSA Designation: NFP
– Location: rear lights, left and right side
– Material: molded foam rubber (water, temperature and vibration resistant)
– Function: seal between the base of the tail light and the body
– Condition: used original part, see photo; flexibility and integrity checked

Package contents
– 2x rear lamp seals (left + right)

Assembly tips
– Disassemble the lamp, carefully clean the contact surfaces on the body and on the lamp from old glue/cut foam
– Install the new gasket without wrinkling and tighten the lamp nuts evenly (do not overtighten to avoid deformation of the gasket)
– Do not use silicone sealants – properly installed original seals seal without them

Search queries / keywords
Peugeot 206 rear light seal, lamp seal 206, light sealing rubber, gasket rear lamp 206, PSA 6350FP, 6350.FP, NFP

Note
This is a used original part from disassembly. Always check the condition according to the photos of the specific piece. If you are unsure about compatibility, please contact us with your car’s VIN.

This right-hand passenger mirror is designed for Peugeot 206 models and comes with a Blue Metallic (KMFD) painted cover. Ideal for mechanics and DIY enthusiasts who need a direct replacement using the original mounting points and connector layout. Common search keywords include Peugeot 206 mirror right, 96437171XT, 8148XY, KMFD mirror, and passenger side mirror Peugeot — include these product codes when searching to quickly locate compatible parts.

Fitment And Compatibility

Designed To Fit: Peugeot 206. May Also Fit: Some Peugeot 206+ variants depending on trim and original equipment. Always check the product codes and physical connector/mounting arrangement against the vehicle when replacing the part.

Technical Information

• Manufacturer: Peugeot / Stellantis
• Model: Peugeot 206 (compatible with certain 206+ variants)
• Product Codes: 96437171XT, 8148XY, 8148.XY
• Additional Numbers: KMFD (Paint Code – Blue Metallic)
• Position: Right / Passenger Side

Function And Features

The exterior mirror provides rearward visibility and correct aerodynamic shape for the vehicle. Depending on the vehicle’s original equipment level, the mirror may be manual or electrically adjustable and can have painted cover matching the body color (KMFD). The unit mounts to the door using factory fasteners and connects to the vehicle’s mirror adjustment wiring where applicable.

How To Replace

Replacement Is Straightforward For Experienced Technicians:

• Remove Interior Door Trim Or Triangular Cover To Access Mirror Fasteners.
• Disconnect The Mirror Electrical Connector (If Present).
• Unscrew Mounting Bolts And Carefully Remove The Old Mirror.
• Fit The New Mirror, Tighten Fasteners To Manufacturer Torque Specifications, And Reconnect Wiring.
• Reinstall Trim And Verify Proper Operation: Adjustment, Folding (if fitted), And Any Heating Function.

Installation Recommendations

For Safe And Reliable Installation: Disconnect The Vehicle Battery Before Working On Electrical Connections To Prevent Short Circuits. Use Proper Trim Tools To Avoid Damaging Interior Panels. Ensure Fasteners Are Torqued According To Manufacturer Specifications And That Wiring Plugs Are Fully Seated. After Installation, Verify Mirror Adjustment Range And Any Electrical Functions Work Correctly.

Why This Part Most Commonly Fails

External Mirrors On Small Cars Fail Primarily Due To Impact Damage From Parking Collisions Or Road Debris. Common Failure Modes Include Broken Mirror Glass, Damaged Housing, Seized Or Failed Adjustment Motor (caused by Water Ingress Or Wear), And Corrosion Of Mounting Points Or Connectors. Mechanical Wear From Frequent Folding Or Accidental Force Can Also Compromise The Mechanism.

Notes For Professionals And DIYers

When replacing a painted mirror, minor differences in paint tone can occur depending on age and exposure of the original panel. If the vehicle has additional features (electric folding, heating, or integrated indicators), confirm the connector pinout and functions before final assembly to ensure full compatibility.

Overview

This left front driver’s seat belt with an integrated pyrotechnic pretensioner is a direct-fit replacement for Peugeot 206 and 206+ models. Designed to restore the original occupant restraint function after damage or pretensioner deployment, the assembly includes the retractor, webbing, buckle interface and pretensioner unit. Ideal for professional workshops and DIY mechanics who search by product code (e.g. 96361049XX, 8973SF), this part ensures correct fitment and safety when installed according to manufacturer procedures.

Function

The seat belt assembly secures the driver in the event of a crash. The pyrotechnic pretensioner activates during a collision to remove slack from the webbing almost instantly, improving occupant restraint and working together with the airbag. The retractor contains a locking mechanism that prevents further extension under sudden deceleration.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Peugeot 206, Peugeot 206+
• Product Codes: 96361049XX, 8973SF, 8973WK, 8974GT
• Additional Numbers: (3/5d|8973.SF), 8973.WK, 8973SF, 8973WK, 8974.GT
• Position: Left Front (Driver Side)
• Color: FXX – Black

Installation Recommendations

Always follow safe workshop procedures. Before starting, disconnect the vehicle battery and wait at least 10–15 minutes to allow SRS capacitors to discharge. Remove interior trim to access mounting points, unbolt the lower anchor and retractor mounting bolts (use new bolts where specified), and carefully detach electrical connector(s) for the pretensioner if present. Install the new assembly in the original orientation and torque all fasteners to manufacturer specifications. Reconnect the pretensioner connector, reassemble trim, reconnect the battery and clear any SRS fault codes with an appropriate diagnostic tool. Do not attempt to reuse or service a deployed pretensioner; it is a single-use safety device.

Why This Part Most Commonly Fails

Pyrotechnic pretensioners are typically one-time-use components that activate during a collision; after deployment the entire belt assembly must be replaced. Other common causes of seat belt failure include webbing wear or fraying from frequent use, contamination or jamming of the retractor mechanism, corrosion on mounting points or internal components, and electrical connector damage. Water ingress or prolonged exposure to harsh environments can accelerate degradation of the retractor and pretensioner circuitry.

Notes For Professionals

Because the pretensioner contains a pyrotechnic element and interfaces with the airbag system, installation and SRS diagnostics are recommended to be performed by trained technicians. After replacement, verify proper operation of the retractor, buckle latch and SRS indicator. Replace any mounting hardware that is damaged or shows corrosion to ensure secure attachment.