Product Overview

This gear position indicator assembly is designed for the robotized (automated manual) transmission used on early Citroën C1, Peugeot 107 and Toyota Aygo models. The unit consists of the shift-gate housing and the cover that seals the shift lever opening, providing a clean appearance and protecting internal components from dirt and moisture. Ideal for workshops and DIY mechanics who need a direct-fit replacement or who search by part numbers such as 246329, 2461E6 or 240781.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C1; Peugeot 107; Toyota Aygo (Fitment Up To 2013)
• Product Codes: 246329, 2461E6, 240781
• Other Numbers: 2461000000, 240781, NFP

Fitment And Compatibility

Compatible with Citroën C1 and Peugeot 107 vehicles equipped with the robotized/automated manual gearbox and the corresponding center console layout produced up to model year 2013. Also fits the Toyota Aygo architecture that shares the same gearbox components. Always verify the part numbers listed above against the unit you are replacing to ensure correct fitment.

Function And Typical Symptoms

The indicator shows the selected gear (park/neutral/drive/gear positions) and guides proper engagement of the robotized transmission. Common symptoms of a failing or damaged indicator assembly include a loose or rattling shift surround, misaligned shift lever travel, visible cracks in the housing, ingress of dirt or water into the gear gate area, and reduced tactile feedback when changing gears.

Most Common Failure Causes

• Mechanical Wear And Fatigue: Plastic housing and clips can crack or break after years of use or impact.
• Ingress Of Dirt And Moisture: Sealing failure leads to corrosion of internal parts or stiffness in the shift mechanism.
• Accidental Damage: Abrasion from heavy use or damage during other repairs can deform the gate housing.
• Connector Or Mounting Failure: Loose fasteners or torn mounting points cause play or misalignment.

Installation Recommendations

Recommended For Professional Mechanics And Competent DIYers. Basic Replacement Steps:

• Prepare Workspace: Park vehicle on level ground, engage parking brake and ensure ignition is off.
• Disconnect Battery: Before working on any interior electrical components, disconnect the battery to avoid short circuits and accidental system engagement.
• Remove Trim: Carefully pry off surrounding trim pieces and shift gaiter to access the shift-gate housing screws and clips.
• Unfasten And Unplug: Remove mounting screws, release retaining clips and disconnect any electrical connector or sensor plugs associated with the indicator.
• Fit New Unit: Position the replacement housing, reconnect electrical plugs, and secure fasteners to manufacturer torque recommendations.
• Check Operation: Reconnect the battery, verify smooth lever travel, confirm correct gear position indication, and reassemble trim.

Use trim tools to avoid damaging plastic panels. Replace any worn clips or grommets to restore proper fit. If electrical contacts show corrosion, clean them before reassembly.

Service Life And Maintenance

These plastic housings typically last many years under normal use but become more susceptible to damage on high-mileage or heavily used vehicles. Regular inspection during service intervals and prompt replacement of torn gaiters or loose fittings will prevent debris ingress and extend component life.

How To Replace

1. Remove the center console trim and shift boot.
2. Unscrew the retaining bolts of the shift-gate housing.
3. Disconnect any electrical connectors related to the indicator assembly.
4. Extract the old housing, compare part numbers, and fit the replacement unit.
5. Reassemble in reverse order, ensuring all clips and screws are secure.
6. Test gear selection and visual alignment of the indicator before returning the vehicle to service.

Why Choose This Part

Simple direct-fit replacement for common Citroën/Peugeot/Toyota models—ideal when the shift surround is cracked, loose or cosmetically worn. Listing multiple OE numbers in the description increases findability for technicians and owners searching by part code.

This gear position indicator (part number 246329) is a direct-fit component designed for robotized/automated transmissions used on Citroën C1, Peugeot 107 and Toyota Aygo models up to 2013. Ideal for workshops and experienced DIY mechanics, the unit restores clear, reliable gear readout on the dashboard or center console and helps avoid mis-shifts and driver confusion. The part is commonly searched by its product code 246329, making it quick to find in catalogs and spare-parts databases.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C1, Peugeot 107, Toyota Aygo
• Product Codes: 246329
• Additional Numbers: NFP

Features And Benefits

Provides a clear, visible readout of the selected gear for automated/robotized gearboxes. Restores correct display after internal failure, faded backlight or damaged housing. Built to match original fitment points and electrical connectors for straightforward replacement, reducing workshop time. Improves safety and driver confidence by ensuring accurate gear information is shown at all times.

Installation Recommendations

Intended for installation by qualified technicians or experienced DIY mechanics. General replacement steps:

1. Disconnect the negative battery terminal before starting work to prevent electrical damage.
2. Remove surrounding trim and access panels (console or dash fascia) to reach the indicator unit.
3. Carefully unplug the electrical connector(s) and remove any retaining screws or clips.
4. Install the new indicator, secure fasteners and reconnect the electrical connector(s).
5. Reassemble trim, reconnect the battery and verify correct operation of the indicator and gearbox display.

Check wiring, connector pins and fuses if the new unit does not illuminate or display correctly. Some vehicles may require a system check or basic initialization with dealer-level diagnostic equipment to clear error codes related to the transmission control system.

Common Failure Causes

• Electrical faults: corroded or loose connectors, broken wires or blown fuses interrupting power or signal.
• Moisture Ingress: water penetration can damage internal electronics or backlighting, especially in older vehicles.
• Mechanical Damage: cracked housing or broken mounting points from impacts or improper removal.
• Wear And Age: faded backlight, failing display elements or internal solder joint fatigue over many years of use.
• Selector Sensor Issues: faults in the gearbox position sensor or its wiring can result in incorrect or no gear display even if the indicator unit itself is fine.

Why Replace This Part

A faulty gear position indicator can lead to driver uncertainty, incorrect gear selection and diagnostic confusion in the workshop. Replacing the indicator restores clear visual feedback from the transmission and helps ensure safe vehicle operation.

Notes On Compatibility

Fits Citroën C1, Peugeot 107 and Toyota Aygo models up to year 2013 as stated above. This item is often cross-referenced by part number 246329; always verify that connectors and mounting points match the vehicle during installation.