The front right door lock for the Peugeot 207 is intended for the passenger door of the hatchback and station wagon bodies. This is an original used part produced by the PSA concern, suitable for replacing a damaged or non-functional central locking lock. Thanks to a properly functioning lock, the front door will close, lock and unlock both mechanically with a key and via central locking.

This part is often searched for by the product numbers listed below. Code matching is very important for used car parts, as the locks may have different electrical equipment or mechanical design depending on the year of manufacture and the specific equipment of the car.

Manufacturer:
DOG CITROEN PEUGEOT

Model:
Peugeot 207 – front right door (passenger door), hatchback and station wagon

Product codes:
24099816
24097816
24095816
24094158
24095158
24093158
9136W6

Other numbers:
The designation of the part may differ slightly on the label or casting (suffixes, production series), but the same basic number from the above list is important.

Technical information:
– Location: right front door – passenger door
– Functions: mechanical door locking + cooperation with central locking
– Designed for Peugeot 207 cars (depending on equipment version and year of manufacture)
– Electric design: lock with integrated electric control for central locking
– Used original part from the dismantling of the car

Installation recommendations:
– Before installation, check the mechanical operation of the lock and the condition of the door pulls and levers.
– When disassembling the old lock, note the position of the rods and connectors, this will facilitate assembly.
– Always secure the electrical connector carefully – a poor contact can cause occasional central locking problems.
– Check the condition of the seals in the door to prevent water and dirt from entering the lock.
– After installation, test the function of the lock with the key and the remote control: locking/unlocking, internal handle and child lock (if it is on the car).
– Professional assembly by a car mechanic is recommended, or the procedure according to the original Peugeot service manual, especially due to the correct setting of the tie rods and the safe reassembly of the doors.

This electric right door lock is a direct-fit replacement for the passenger side of the Peugeot 207 three-door hatchback. Ideal for professional workshops and DIY mechanics who need a reliable locking mechanism to restore central locking, door security and proper function of the passenger door. The unit is compatible with several OEM reference numbers often used when searching by part code.

Technical Information

• Manufacturer: Stellantis
• Model: Peugeot 207 (3-Door Models) — Passenger Side / Right
• Product Codes: 9136W2, 24099816
• Additional Numbers: 24097816, 24095816

Fitment And Function

Designed for the right-hand (passenger) door of the Peugeot 207 three-door variant. The lock assembly operates the latch and interfaces with the central locking actuator and door rods/cables to secure and release the door. It replaces worn or damaged factory units and restores consistent locking, unlocking and mechanical latching.

Installation Recommendations

Replacement is straightforward for a trained technician or experienced DIYer. Typical steps include:

• Remove the interior door trim and any moisture barriers to access the lock assembly.
• Disconnect the electrical connector to the central locking actuator and release the latch linkages/cables.
• Unscrew the lock mounting bolts and remove the old unit from the door shell.
• Transfer any required linkages or levers to the new lock, fit the new unit in place, and tighten mounting fasteners securely.
• Reconnect electrical plugs and test the mechanism for smooth mechanical movement and correct central locking operation before refitting trim.

Always follow the vehicle manufacturer’s procedures during disassembly and reassembly. After installation, lubricate moving latch points with appropriate grease and verify that door opens, closes and locks smoothly. Test central locking and remote key operation.

Why This Part Commonly Fails

• Wear Of Internal Plastic Gears Or Actuator Components: Plastic gearing inside the latch/actuator can wear or break over time, causing intermittent or complete failure.
• Water Ingress And Corrosion: Moisture entering the door can corrode metal parts or short electrical connectors and actuators.
• Mechanical Damage: Impact from door slams, accidents or misaligned striker plates can deform the latch mechanism.
• Rod/Cable Detachment Or Wear: Linkages between the lock and the handle/actuator can come loose or wear, preventing proper function.
• Electrical Connector Faults: Corroded or damaged wiring and plugs can interrupt power to the lock actuator.

Notes For Buyers

Searches by product code (for example 9136W2 or 24099816) are common when replacing door locks — keeping the OE numbers handy speeds up identifying the correct part. This unit is aimed at mechanics and competent DIY installers who are familiar with door trim removal and basic electrical/mechanical diagnostics.