Product Overview

This right front (passenger side) door lock is suitable for Peugeot 207 hatchback and estate (SW) models. It replaces the factory lock assembly and integrates the mechanical latch and locking actuator functions to restore secure door closing and central locking operation. The part is commonly referenced by OEM codes such as 24099816, 24097816, 24095816 and related numbers, which customers often use when searching for replacement door locks.

Who Should Buy This

Designed for professional workshops and experienced DIYers, this door lock is ideal when the passenger door refuses to latch, the central locking does not respond, or when the door opens with excessive play. Quick identification by product codes makes ordering faster for technicians who need an immediate, direct-fit replacement.

Installation Guide

General replacement steps for the right front door lock (typical for Peugeot 207):

• Prepare Tools: Torx and Phillips drivers, trim removal tools, ratchet set, and lubricants.
• Raise the Window: Position the window fully up and support it if necessary.
• Remove Door Trim: Carefully remove the interior door card and any covers to access the lock mechanism. Keep clips and screws organized.
• Disconnect Electrical Connector: Unplug the connector to the lock actuator (if fitted) and note connector orientation.
• Detach Linkages: Carefully unclip and mark the positions of rods and plastic clips linking the latch to the handle and central locking system.
• Remove Lock Assembly: Unscrew the retaining bolts and withdraw the lock unit from the door shell.
• Transfer Components: Move any required rods, clips or striker parts to the new lock if not supplied pre-assembled.
• Fit New Lock: Install the new lock, secure bolts to the correct torque, reconnect linkages and electrical connector.
• Test Operation: Check mechanical operation, manual locking, and central locking cycles before reassembling the door trim. Lubricate the latch with appropriate grease.

Safety Tip: If the vehicle is equipped with side airbags or complex electrical systems, consider disconnecting the battery and follow the vehicle manufacturer’s safety procedures before working on the door.

Why This Part Fails Most Often

• Wear And Tear: Repeated use causes wear on latch components and plastic clips, leading to slack or failure to engage.
• Actuator Motor Failure: The small motor or gears in the locking actuator can seize or lose drive, preventing remote or central locking operation.
• Corrosion And Water Ingress: Moisture entering the door cavity can corrode metal parts and electrical contacts, especially in older vehicles.
• Broken Linkage Or Clips: Plastic linkage clips commonly fatigue and break, causing the handle or lock to become disconnected from the latch.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 207 (Hatchback, Estate)
• Product Codes: 24099816, 24097816, 24095816, 24094158, 24095158, 24093158
• Other Numbers: 9136W6

Practical Tips

• Always inspect surrounding components: door hinge alignment, striker plate and rubber seals—misalignment can accelerate lock wear.
• Replace broken plastic clips when fitting the new lock to ensure reliable long-term operation.
• Use light grease on the latch mechanism to prevent squeaks and slow wear, but avoid contaminating electrical connectors.

Final Notes

When replacing the right front door lock on a Peugeot 207, follow methodical disassembly and reassembly to preserve door trim and clips. Correct installation restores secure closure and reliable central locking—important for vehicle safety and comfort. The listed product codes make it easy to find the correct unit for direct replacement.

This replacement right rear door lock is designed specifically for the Peugeot 207 (hatchback and estate) and is an ideal choice for professional mechanics and DIY enthusiasts who need a reliable, direct-fit solution. The unit fits the passenger-side rear door and matches common OEM references, making it easy to locate by part number (24097816, 24095816, 24099158, 9138H8). Built to restore secure latching, smooth operation and central-locking function, this lock helps eliminate common faults such as failed locking, intermittent central locking behaviour and noisy actuators.

Key Features and Benefits

– Direct-fit for Peugeot 207 rear passenger-side door (hatchback and estate).

– Compatible with OEM references 24097816, 24095816, 24099158, 9138H8, improving findability by part number.

– Restores mechanical latch action and electric central-locking signals when actuator/microswitch has failed.

– Simple replacement reduces workshop labour time compared with repairs to internal components.

– Recommended for vehicles showing symptoms such as door not locking/unlocking, intermittent lock feedback, or noisy operation.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Peugeot 207 (Hatchback, Estate)
• Product Codes: 24097816, 24095816
• Additional Numbers: 24099158, 9138H8

Function and Symptoms

The door lock assembly combines a mechanical latch, electric actuator and one or more microswitches that inform the central locking system and interior electronics of the door position. Typical failure symptoms include: door that does not lock or unlock with the central locking, intermittent locking/unlocking, grinding or buzzing noises from the lock area, or inability to secure the door. In some cases a faulty microswitch can prevent interior lights or locking indicators from reacting correctly.

Replacement Procedure (Overview)

1. Remove the interior door trim/panel to access the lock mechanism. Use appropriate trim tools to avoid damaging clips.

2. Disconnect the electric connector and any linkage rods from the lock assembly. Note positions of rods and clips for reassembly.

3. Unbolt the lock from the door edge and carefully extract the unit.

4. Fit the new lock, reattach rods and connectors in the original positions, and secure bolts to the manufacturer’s torque specs.

5. Test central locking operation, door latching, and switch signals before refitting the door card. Adjust rod lengths/clip positions if the latch does not operate smoothly.

Installation Recommendations

– Work in a dry, well-lit environment and protect the door trim and paintwork while removing components.

– Before starting, ensure the door is supported and the window is in a safe position to avoid damage to the regulator.

– After installation, verify that the locking/unlocking cycle is complete and that the door closes and latches securely at rest.

– If electrical symptoms persist after replacement, check wiring, connector corrosion and the central locking fuse/relays.

– For safety, isolate the battery if you will be working close to other electrical modules; follow manufacturer procedures when reconnecting.

Most Common Failure Causes

– Wear Of Mechanical Components: Repeated use causes wear of latches and plastic gears, leading to poor engagement or noise.

– Actuator Or Microswitch Failure: Electric motors and switches inside the unit can fail, producing intermittent or permanent locking faults.

– Water Ingress And Corrosion: Moisture can corrode contacts or seize mechanical parts—common in older door seals or after water entry.

– Impact Or Door Damage: Collisions or strong impacts can deform latch geometry or damage internal components, causing malfunctions.

Why Choose This Part

Purchasing a correct-fit replacement with known product codes (24097816, 24095816, 24099158, 9138H8) shortens diagnostic time and ensures compatibility with Peugeot 207 central locking systems. The unit is suited for professional workshops and competent DIYers familiar with door disassembly and basic electrical checks.

This electric right door lock is a direct-fit replacement for the passenger side of the Peugeot 207 three-door hatchback. Ideal for professional workshops and DIY mechanics who need a reliable locking mechanism to restore central locking, door security and proper function of the passenger door. The unit is compatible with several OEM reference numbers often used when searching by part code.

Technical Information

• Manufacturer: Stellantis
• Model: Peugeot 207 (3-Door Models) — Passenger Side / Right
• Product Codes: 9136W2, 24099816
• Additional Numbers: 24097816, 24095816

Fitment And Function

Designed for the right-hand (passenger) door of the Peugeot 207 three-door variant. The lock assembly operates the latch and interfaces with the central locking actuator and door rods/cables to secure and release the door. It replaces worn or damaged factory units and restores consistent locking, unlocking and mechanical latching.

Installation Recommendations

Replacement is straightforward for a trained technician or experienced DIYer. Typical steps include:

• Remove the interior door trim and any moisture barriers to access the lock assembly.
• Disconnect the electrical connector to the central locking actuator and release the latch linkages/cables.
• Unscrew the lock mounting bolts and remove the old unit from the door shell.
• Transfer any required linkages or levers to the new lock, fit the new unit in place, and tighten mounting fasteners securely.
• Reconnect electrical plugs and test the mechanism for smooth mechanical movement and correct central locking operation before refitting trim.

Always follow the vehicle manufacturer’s procedures during disassembly and reassembly. After installation, lubricate moving latch points with appropriate grease and verify that door opens, closes and locks smoothly. Test central locking and remote key operation.

Why This Part Commonly Fails

• Wear Of Internal Plastic Gears Or Actuator Components: Plastic gearing inside the latch/actuator can wear or break over time, causing intermittent or complete failure.
• Water Ingress And Corrosion: Moisture entering the door can corrode metal parts or short electrical connectors and actuators.
• Mechanical Damage: Impact from door slams, accidents or misaligned striker plates can deform the latch mechanism.
• Rod/Cable Detachment Or Wear: Linkages between the lock and the handle/actuator can come loose or wear, preventing proper function.
• Electrical Connector Faults: Corroded or damaged wiring and plugs can interrupt power to the lock actuator.

Notes For Buyers

Searches by product code (for example 9136W2 or 24099816) are common when replacing door locks — keeping the OE numbers handy speeds up identifying the correct part. This unit is aimed at mechanics and competent DIY installers who are familiar with door trim removal and basic electrical/mechanical diagnostics.