The front right door lock for the Peugeot 207 is intended for the passenger door of the hatchback and station wagon bodies. This is an original used part produced by the PSA concern, suitable for replacing a damaged or non-functional central locking lock. Thanks to a properly functioning lock, the front door will close, lock and unlock both mechanically with a key and via central locking.

This part is often searched for by the product numbers listed below. Code matching is very important for used car parts, as the locks may have different electrical equipment or mechanical design depending on the year of manufacture and the specific equipment of the car.

Manufacturer:
DOG CITROEN PEUGEOT

Model:
Peugeot 207 – front right door (passenger door), hatchback and station wagon

Product codes:
24099816
24097816
24095816
24094158
24095158
24093158
9136W6

Other numbers:
The designation of the part may differ slightly on the label or casting (suffixes, production series), but the same basic number from the above list is important.

Technical information:
– Location: right front door – passenger door
– Functions: mechanical door locking + cooperation with central locking
– Designed for Peugeot 207 cars (depending on equipment version and year of manufacture)
– Electric design: lock with integrated electric control for central locking
– Used original part from the dismantling of the car

Installation recommendations:
– Before installation, check the mechanical operation of the lock and the condition of the door pulls and levers.
– When disassembling the old lock, note the position of the rods and connectors, this will facilitate assembly.
– Always secure the electrical connector carefully – a poor contact can cause occasional central locking problems.
– Check the condition of the seals in the door to prevent water and dirt from entering the lock.
– After installation, test the function of the lock with the key and the remote control: locking/unlocking, internal handle and child lock (if it is on the car).
– Professional assembly by a car mechanic is recommended, or the procedure according to the original Peugeot service manual, especially due to the correct setting of the tie rods and the safe reassembly of the doors.

This lock for the driver’s front door is intended for Peugeot 207 cars in the hatchback and estate versions. This is an original used part from disassembly, suitable as a replacement for a damaged or non-functional door lock. Thanks to its original design, it fits in its original place and enables full functionality of locking, unlocking and central locking of the driver’s door.

Manufacturer: PSA / Peugeot
Model: Peugeot 207 (hatchback, station wagon)
Location: front left door – driver’s door

Product codes:
24094158
24095158
24093158
9136W6

Other numbers:
They may vary depending on the car version (equipment, year of manufacture, type of central locking), but there is always a match with one of the numbers listed above.

Technical information:
– left front door lock (driver)
– part of the central locking system
– electrical control (connection to the central locking unit)
– mechanical connection to the door handle and internal opening mechanism
– original used design from Peugeot 207 cars

Thanks to the use of an original part, the correct locking function and communication with the rest of the car’s electrical installation are maintained. Suitable for auto mechanics and home repairers who need to quickly replace a faulty lock and restore the car’s secure closure.

Installation recommendations:
– before removing the old lock, disconnect the vehicle battery to avoid damaging the electrical circuits
– carefully remove the door trim and plastic covers to prevent them from breaking
– physically compare the old and new lock (shape, connectors, tie rods) before the assembly itself
– check the condition of the tie rods and cables from the handle, clean them and lubricate them with a suitable lubricant if necessary
– during assembly, make sure that the connectors are properly engaged and that all the rods are attached to the lock levers
– after installing the lock, first test the manual and remote locking function with the door open
– check that the door can be opened smoothly from the outside and from the inside and that the central locking system responds without delay

A correctly installed front driver’s door lock ensures reliable locking of the car, smooth opening and safe operation of the Peugeot 207.

The part commonly wears out due to frequent use, exposure to moisture, and mechanical stress, which can lead to locking issues such as failure to lock or unlock properly. Replacing the door lock can restore full functionality and improve vehicle security.

Technical Information

• Manufacturer: PSA Citroën Peugeot
• Model: Peugeot 207
• Product Codes: 24094158, 24095158, 24093158, 9136W2
• Additional Numbers: 24094158, 24095158, 24093158, 9136W2

Installation typically involves removing the interior door panel, disconnecting the old lock unit, and fitting the replacement lock carefully to ensure proper alignment and connection to the vehicle’s electrical system. It is advisable to check functioning immediately after replacement to ensure the locking mechanism operates smoothly.

This electric right-front door lock is a direct-fit replacement designed for Citroën C4 Picasso and Grand Picasso models. Ideal for professional workshops and experienced DIY mechanics, the unit restores reliable central locking and secure door latching on the passenger side. Commonly searched by part numbers 9136Y8, 24094158, 24095158 and 24093158, this lock assembly replaces worn or failed actuators and latches to eliminate intermittent locking, noisy operation or complete failure to lock/unlock.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C4 Picasso, Citroën Grand Picasso
• Product Codes: 9136Y8
• Other Numbers: 24094158, 24095158, 24093158

Installation Recommendations

Before starting, ensure you have the correct replacement by matching the visible product codes. Recommended basic procedure for replacement:

• Disconnect Battery: Always disconnect the negative battery terminal before working on electrical components to avoid short circuits or damage.
• Remove Door Trim: Carefully remove interior door trim and any plastic clips. Preserve the moisture barrier for resealing.
• Disconnect Electrical Connector: Unplug the lock actuator connector and any wiring harnesses attached to the lock assembly.
• Detach Linkages And Fasteners: Release the locking rods and unbolt the lock assembly from the door shell. Note the orientation of rods and clips for reassembly.
• Install New Lock: Fit the replacement unit, reconnect rods and electrical connector, and loosely refit bolts. Test locking/unlocking function electrically before final torque and refitting trim.
• Seal And Test: Refit the moisture barrier and interior trim. Test central locking, remote function and manual operation several times to confirm smooth engagement.

Use basic hand tools and a trim removal set. If adjustments are needed, align the striker or latch to prevent binding. Follow the vehicle manufacturer’s service instructions for torque values and detailed procedures.

Why This Part Fails Most Often

• Wear Of Internal Actuator Motor Or Gears: Repeated use eventually wears the small motor and plastic gears inside the mechanism, causing slow or failed locking.
• Water Ingress And Corrosion: Moisture entering the lock area promotes corrosion of electrical contacts and mechanical parts, especially where seals or moisture barriers are damaged.
• Mechanical Damage Or Impact: Door damage from accidents or heavy slamming can bend linkages or crack the latch housing.
• Poor Lubrication And Dirt Build-Up: Lack of lubrication and accumulation of debris cause increased friction and premature wear on moving parts.
• Electrical Faults: Wiring fatigue, connector corrosion or intermittent supply issues lead to unreliable operation of the electric actuator.

Replacing a faulty door lock with the correct part number immediately improves safety, convenience and the reliability of central locking. Search using part codes 9136Y8 / 24094158 / 24095158 / 24093158 to find the matching unit for the passenger side of Citroën C4 Picasso and Grand Picasso models.