The Peugeot 207 left rear door lock is designed for hatchback and station wagon versions and is installed in the door behind the driver (left rear door). This is an original used part from the PSA concern, suitable for repairs to the central locking and door mechanics of the Peugeot 207 model. Thanks to this lock, the rear door remains properly closed, lockable and securely secured while driving.

Manufacturer: PSA Citroën Peugeot
Model: Peugeot 207 (hatchback, station wagon – left rear door behind the driver)
Product codes: 24087816, 24091816
Other numbers: 24090158, 24092158, 24089158, 9137F9E

The used original rear door lock is especially suitable for auto mechanics and home repairers who need to reliably solve problems with non-functioning central locking, door jamming or mechanical damage to the original lock. The original part usually ensures a better service life and precise fit than cheap universal replacements.

Installation recommendations:
– Before removing the original lock, disconnect the battery to avoid a short circuit or error messages in the central locking control unit.
– Carefully dismantle the inner door panel and check the condition of the rods, cables and connectors. Replace damaged plastic handles or broken tie rods.
– Before installing a new lock, check the compatibility of the connectors and the mechanical attachment. Install the lock in the original mounting points and tighten the screws securely.
– Check the smooth operation of the handle from the outside and the inside, the function of the child lock (if it is in the door), and the correct response of the central locking to the remote control and key locking.
– After installation, perform a test drive and open and close the door several times to verify that there is no rubbing, poor closing or spontaneous unlocking.

The Peugeot 207 left rear door lock is intended for installation on the left rear door behind the passenger on Peugeot 207 cars in hatchback and station wagon body versions. This is an original electric door lock with central locking, which ensures reliable closing and unlocking of the doors, safe securing while driving and proper functioning of the car’s comfort systems.

This part is suitable as a replacement for a damaged or non-functioning lock when there are problems with locking/unlocking the door, jamming of the handle, impossibility to open or close the door, or central locking malfunctions on only one door. Thanks to the preservation of the original specifications, the correct function of the electrical control and the mechanical operation of the lock is ensured.

Technical information:
Manufacturer: PSA (Citroën / Peugeot)
Model: Peugeot 207 (hatchback, station wagon / SW) – left rear door behind the passenger
Location: left rear door, side behind the passenger
Part type: electric door lock / rear door central locking

Product codes:
24090158
24092158
24089158
9137F9

Other numbers:
It can also be marked as rear left door lock, rear left door lock, rear left door latch for Peugeot 207 in various catalog or service systems.

The part is suitable for use especially during professional repairs in car repair shops as well as during home repairs, when a functional replacement of the original lock is required without the need to modify the attachment or electrical installation.

Installation recommendations:
Before removing the old lock, disconnect the vehicle’s battery to avoid a short circuit or errors in the control units. Disassemble the inner door panel, carefully release the rods from the handle and from the central locking and disconnect the electrical connector. When installing a new lock, check the condition of the pull rods, plastic clips and seals in the door, replace them if necessary. Carefully place the lock in the door in its original position and properly tighten the fastening screws. After connecting the connector and reconnecting the battery, test the function of the central locking, the external and internal handles and the child lock, before refitting the door trim. For professional installation, it is advisable to carry out a test of all doors after installation and a short test drive to verify the correct closing and locking of the doors.

Overview

This electric door lock is designed as a direct replacement for the left rear door on Citroën C4 Picasso and Grand Picasso models. It restores reliable central locking operation, secures the rear passenger door and integrates with the vehicle’s original locking rods and electrical connector. Frequently searched under product numbers, this part is intended for professional mechanics and experienced DIY enthusiasts who perform door module and lock repairs.

Function

The lock assembly contains the mechanical latch and an electric actuator that receives commands from the central locking system to lock or unlock the door. It also incorporates microswitches that signal the body control module about the door’s open/closed and locked/unlocked status. Proper function ensures safe door closure, child-lock operation (where applicable) and correct interaction with alarm and central locking systems.

Compatibility

Compatible With: Citroën C4 Picasso, Citroën Grand Picasso. This unit fits the left rear door (door behind the driver). Searches for the part often use the following reference numbers: 9137H1, 9137H124090158, 24089158, 24092158, 24090158.

Technical Information

• Manufacturer: Citroën / Stellantis
• Model: Citroën C4 Picasso, Citroën Grand Picasso
• Product Codes: 9137H124090158, 9137H1
• Additional Numbers: 24089158, 24092158, 24090158

Replacement Instructions

1. Disconnect the negative battery terminal before starting work.
2. Remove the interior door trim and any waterproof membrane to access the lock assembly.
3. Unplug the electrical connector and release the locking rods/clips linked to the latch (note positions for reassembly).
4. Unscrew the lock retaining bolts and remove the old unit from the door shell.
5. Install the replacement lock, secure bolts to the correct torque, reconnect rods and the electrical connector.
6. Test locking/unlocking functions and door position switches before refitting the door trim.

Installation Tips

Use appropriate tools (Torx/sockets/trim tools) and keep small clips and fasteners organized. Test the actuator and microswitches with the connector connected but door trim removed to confirm correct operation. Lubricate the latch points with a light specialist grease and check the striker alignment if the door does not close smoothly. Always ensure connectors are clean and dry; replace any cracked plastic clips or damaged wiring.

Why This Part Fails

Common causes of lock failure include moisture ingress and corrosion, wear of internal plastic gears or levers, electrical motor or microswitch failure, impact damage from door slams or accidents, and broken linkage clips. Symptoms of a failing lock are intermittent or complete loss of locking/unlocking function, unusual grinding or clicking noises from inside the door, or the door failing to latch securely.

Useful Notes

Mechanics and DIYers often search by the part numbers listed above to ensure they obtain the correct unit. Follow safe workshop practices during replacement and verify full function of central locking and door switches after installation.