Product Overview

High-quality instrument display unit manufactured by Magneti Marelli, designed to show total mileage and a range of vehicle status indicators for Citroën C8 and Peugeot 807 models. The module includes the odometer readout and multiple warning lights that inform the driver about engine status, ABS, airbags, lights, and other monitored systems. This unit was removed from a donor vehicle with a recorded mileage of 211,453 km.

Why Choose This Unit

This original equipment display is suitable for mechanics and experienced DIYers looking for a direct replacement part. It preserves the original interface and wiring layout, avoiding aftermarket compatibility issues. Many customers search by product number, so the unit’s reference codes are stated in the Technical Information section for quick identification.

Installation Recommendations

• Disconnect the battery before starting work to avoid short circuits and to protect the electronics.
• Remove the trim panels surrounding the instrument cluster using appropriate trim tools to prevent damage to plastic clips.
• Unscrew the cluster retaining screws and carefully pull the unit forward to access the wiring connectors.
• Release the locking tabs on the multi-pin connectors and remove the unit. Handle the display by its housing—avoid pressing the lens or LCD surface.
• Fit the replacement unit by reversing the removal steps. Reconnect the battery and verify all instrument functions, warning lights, backlighting and odometer display.
• If any warning lights remain or some functions do not respond, perform a full systems scan with appropriate diagnostic equipment to identify related faults.

Most Common Cause Of Failure

• LCD Segment Failure or Pixel Burn: Over time segments can dim or fail due to aging of the display or thermal stress.
• Backlight Degradation: Dim or flickering backlight caused by failed LEDs or aging components.
• Corroded Or Loose Connectors: Poor electrical contact from moisture ingress or vibration leading to intermittent operation.
• Failed Solder Joints Or Electronic Components: Thermal cycling can crack solder joints or cause capacitor/resistor failures on the display PCB.
• Water Damage Or Overvoltage Events: Exposure to moisture or voltage spikes can permanently damage the module.

Practical Notes For Fitment

Instrument clusters are generally a direct mechanical fit, but after installation you should verify that all warning lamps illuminate during the key-on self-test and that the odometer is displayed correctly. No additional body control unit pairing is normally required for the display itself, however any linked functions (such as illumination intensity via Body Control modules) should be checked with a diagnostic tool if they behave unexpectedly.

Technical Information

• Manufacturer: Magneti Marelli
• Model: Display For Citroën C8 / Peugeot 807
• Product Codes: 1496286080
• Additional Numbers: 610578, 211000, 211453, NFP

Additional Advice

Protect the unit from electrostatic discharge and avoid working on it with wet hands. If you encounter intermittent faults after installation, inspect connector pins for deformation or corrosion and re-seat connectors. For thorough diagnostics of related vehicle systems, use manufacturer-grade diagnostic equipment to read fault codes and live data.

Overview

Direct-fit instrument cluster suitable for Citroën Berlingo II and Peugeot Partner II vehicles. The unit displays vehicle speed, odometer reading, warning indicators and auxiliary gauges depending on vehicle specification. This particular unit comes from a car with 211,000 km and shows physical damage to the front plexiglass caused by airbag deployment — the plexiglass must be replaced before final installation.

Why Choose This Unit

Many workshops and DIY mechanics search by part number — this cluster is commonly referenced under the part numbers listed below. Buying a used, vehicle-specific cluster can save time and cost when an identical donor unit is available for replacement of a faulty instrument panel or to restore full functionality after mechanical or electrical faults.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën Berlingo II / Peugeot Partner II
• Product Codes: 9652246380, 1608429280
• Additional Numbers: 6105V3, 6105V4
• Mileage On Donor Unit: 211000 km

Function And Typical Faults

Instrument clusters provide essential driver information: speed, trip and total odometer, warning lamps (airbag, ABS, engine), and depending on fitment, fuel level and coolant temperature. Common failure modes include stepper motor wear (causing stuck or inaccurate needles), LCD or segment failure, backlight degradation, connector/circuit board corrosion, and physical damage caused by impacts or airbag deployment. In this case the plexiglass is cracked/damaged by the airbag; internal electronics should be inspected for shock-related faults before final fitment.

Installation Recommendations

Removal and installation should be performed by an experienced technician or a competent DIY mechanic familiar with PSA wiring and trim. Typical replacement steps:

• Disconnect the vehicle battery before starting work to avoid short circuits and to protect vehicle electronics.
• Remove surrounding trim panels carefully to access the cluster bezels. Use trim tools to avoid damaging plastic clips.
• Unscrew the cluster mounting fasteners, gently pull the cluster forward and disconnect electrical connectors. Note connector orientation and locking tabs.
• Inspect connectors, wiring harness and cluster PCB for signs of corrosion or impact damage. Replace or repair as necessary.
• Fit the replacement cluster, reconnect connectors and reassemble trim. Reconnect the battery and verify instrument functions and warning lamp behavior.

Why This Part Fails Most Often

The most frequent causes of instrument cluster failure are mechanical wear of internal stepper motors, long-term heat exposure causing LCD/backlight failure, moisture ingress and poor electrical contacts. Clusters are also commonly damaged in collisions — airbag deployment can fracture the plexiglass and transmit shock to the instrument PCB and connectors, necessitating replacement or repair of the front lens and a careful inspection of the electronics.

Notes For The Buyer

This listing is for the instrument cluster as described. The plexiglass on this unit is damaged and requires replacement prior to cosmetic installation. Verify part numbers against the required reference when searching by code: common references include 9652246380 and 6105V3. Removing and refitting instrument clusters requires careful handling; if you are unsure, have the work performed by a professional technician.