The Valeo CL18 180A alternator is a high-output charging unit designed for PSA Group vehicles equipped with 2.0 and 2.2 HDi diesel engines. Built with a freewheel (one-way) pulley to protect the belt drive from torsional shocks, this alternator supplies stable current for heavy electrical loads found in modern Citroën and Peugeot cars. Ideal for professional mechanics and experienced DIYers who need a reliable replacement part that meets the electrical demands of late-model HDi powertrains.

Key Features

• High output: 180 A nominal capacity suitable for vehicles with multiple electrical consumers (heated seats, infotainment, extra lighting).
• Freewheel Pulley: Integrated overrunning pulley to reduce belt stress and extend accessory drive life.
• Direct Fit: Designed as a replacement for Valeo CL18 alternators used on PSA 2.0/2.2 HDi engines.
• Multiple Cross-References: Compatible with a range of OEM/product numbers (see Technical Information).

Compatibility And Applications

Suitable For Citroën And Peugeot Models Equipped With 2.0L And 2.2L HDi Engines. Examples Include Common PSA Platforms Fitted With CL18/180A Alternators (e.g., Certain Citroën C5/C6 And Peugeot 407/607 Applications). Always Fit According To Vehicle Specification And Engine Variant.

Technical Information

• Manufacturer: Valeo
• Model: CL18 (180 A), Freewheel Pulley
• Product Codes: 9661544880; 9688085380; 5702K8; 5705AX; 5705EE; 5705JF; 5705E7; 5705NG; 5702F4; 5702G2
• Additional Numbers: 180A; CL18

How The Alternator Works

The alternator converts mechanical energy from the engine into electrical power to charge the battery and supply vehicle electrical systems. The voltage regulator controls output to maintain system voltage (typically around 13.8–14.6 V under load). The freewheel pulley decouples torsional vibrations from the accessory belt, reducing stress on the belt and bearings.

Replacement Procedure (Overview)

• Safety First: Disconnect the negative battery terminal before any work on the charging system.
• Remove Drive Belt: Relieve tension from the accessory belt and remove it from the alternator pulley.
• Disconnect Electrical Connectors: Unplug the alternator electrical connector and battery feed (observe nut size and connection orientation).
• Unbolt Alternator: Remove mounting bolts and extract the unit from its brackets.
• Install New Alternator: Position new alternator, tighten mounting bolts to manufacturer specification, reconnect electrical plugs and battery feed, and fit the drive belt with correct tension.
• Verification: After reconnecting the battery, start the engine and check charging voltage and belt alignment. Inspect for abnormal noise indicating pulley or bearing issues.

Installation Recommendations

• Always Disconnect The Battery Before Starting Work And Follow Manufacturer Procedures.
• Inspect Drive Belt And Tensioner; Replace If Worn Or Damaged To Prevent Premature Alternator Failure.
• Check Battery Condition Prior To Installation—A Weak Battery Can Overload A New Alternator.
• Ensure Electrical Connections Are Clean And Secure; Corroded Terminals Can Cause Voltage Drops.
• After Installation, Measure Charging Voltage Under Idle And Load To Confirm Proper Operation (Approx. 13.8–14.6 V).
• If The Freewheel Pulley Is Replaced Or Disturbed, Ensure Correct Orientation And That The Pulley Frees In The Correct Direction.

Why Alternators Like This Fail

• Bearing Wear: Bearings Exposed To High Loads Or Contamination Can Produce Noise And Eventually Seize.
• Brush And Slip Ring Wear: Mechanical Wear Of Brushes Leads To Poor Contact And Reduced Output.
• Rectifier/Diode Or Regulator Failure: Electronic Components Can Fail Due To Heat Or Electrical Surges.
• Contamination: Oil, Coolant, Or Debris Entering The Unit Can Damage Bearings And Electronics.
• Accessory Overload: Additional Electrical Equipment Or A Failing Battery Increases Stress On The Alternator.

Part Numbers And Cross-Reference Codes Are Included In The Technical Information Section To Help Locate The Correct Replacement. For Professional Fitment, Use Proper Tools And Observe Manufacturer Torque And Safety Guidelines.

Looking for a reliable and high-performance alternator for your vehicle? Introducing the Citroën Peugeot used alternator with model number A002TV0081ZE, delivering 180A of power. This alternator is compatible with a variety of vehicles including CITROËN, PEUGEOT, OPEL, and FIAT. It was removed from a vehicle with only 48,000 km, ensuring minimal wear and a long service life.

Why choose this alternator model? The alternator plays a crucial role in your vehicle’s electrical system, charging the battery and supplying electrical power to all onboard electronics while driving. This alternator ensures stable current delivery, helping maintain engine performance and battery health.

Technical Information:

• Manufacturer: Citroën Peugeot
• Model: A002TV0081ZE
• Product Codes: 9824742880, 9809200480
• Additional Numbers: Not Specified
• Compatible Vehicle Models: CITROËN BERLINGO III, PEUGEOT PARTNER III, PEUGEOT RIFTER

Replacing your alternator with this quality part ensures reliable electrical system performance and avoids future problems related to insufficient charging or electrical failures. It provides an optimal balance between cost and quality, making it a smart choice for both professional mechanics and DIY enthusiasts. Boost your engine bay’s reliability without the expense of a brand-new part.

While this Citroën Peugeot alternator is not brand new, its performance, quality, and reliability meet the high standards demanded by professionals and home mechanics alike. Each part purchased from our store undergoes thorough inspection and comes with a satisfaction guarantee.