High-quality replacement speaker designed for Citroën and Peugeot passenger cars. This 165 mm speaker (OE 9640741280 / 6562X3) is a direct-fit solution for common factory locations such as front or rear door mounts on compatible models. Built with serviceability in mind, the unit is suitable for professional workshops and experienced DIY mechanics seeking a reliable sound upgrade or OEM-equivalent replacement.

Benefits And Application

Fits Many Citroën And Peugeot Models Including Citroën C3 Picasso, Citroën C4 And Peugeot 206. Easy To Install In Factory Speaker Locations. Restores Clear Midrange And Balanced Sound Where Original Unit Has Degraded. Frequently Searched By OE Numbers 9640741280 And 6562X3.

Installation Recommendations

• Turn Off Ignition And, If Possible, Disconnect The Negative Battery Terminal Before Starting Work To Avoid Short Circuits.
• Required Tools: Trim Removal Tools, Phillips Or Torx Screwdriver (Depending On Vehicle), Multimeter For Polarity Check.
• Step By Step: Remove Door Trim/Panel Carefully Using Trim Tools → Detach Old Speaker Connector → Unscrew Speaker From Mounting Frame → Compare Polarity And Fit New Speaker → Secure Speaker With Original Fasteners → Reconnect Connector And Test Audio Before Reassembling Trim.
• Check That Speaker Impedance Matches Vehicle Specification (Often 4 Ω) And Confirm Connector Pinout; Use An Adapter Harness If Available To Avoid Cutting Factory Wiring.
• Ensure Sealing Around Door And Speaker Gasket Is Intact To Prevent Water Ingress; Replace Any Damaged Grilles Or Clips During Reassembly.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C3 Picasso, Citroën C4, Peugeot 206 (Selected Applications)
• Product Codes: 9640741280, 6562X3
• Additional Numbers: Diameter 165 mm

Reason Why The Part Most Commonly Fails

Speaker Failure Is Typically Caused By Age-Related Wear Such As Deterioration Of The Cone Or Foam Surround, Water Ingress From Faulty Door Seals, Corrosion Of Terminals, Or Thermal Damage To The Voice Coil From Overdrive. Mechanical Damage From Impact During Door Service Or Poorly Seated Grilles Can Also Lead To Distortion And Loss Of Performance.

For Professional Fitters And Confident DIYers: This speaker Offers A Straightforward Replacement Path To Restore Factory Sound Quality Or Prepare The Vehicle For Further Audio Upgrades. Use Proper Tools And Follow Vehicle Manufacturer Procedures For Safe And Reliable Installation.

Overview

High-quality OEM 165 mm speaker, designed as a direct replacement for many Citroën and Peugeot models. Supplied as an original new part, this speaker restores factory sound characteristics and fitment, making it ideal for professional workshops and experienced DIYers searching by part numbers 9664955980 or 6562X3. Easy to install into standard 165 mm mounting locations, it delivers reliable performance for everyday driving and improves clarity compared with worn factory units.

Compatible Models

Commonly used in: Citroën C3 Picasso, Citroën C4 Picasso, Citroën C5 (X7), Peugeot 207, Peugeot 407. Often referenced by OEM codes 9664955980 and 6562X3.

How To Replace

1. Remove the door trim or speaker grille to access the original speaker (use appropriate trim tools to avoid damage).
2. Unscrew the retaining screws and carefully pull the speaker out of the mounting cup.
3. Unplug the electrical connector from the speaker. Inspect the connector for corrosion or damaged pins.
4. If required, transfer any adapter plates or sealing foam from the old speaker to the new unit to ensure correct fitment.
5. Connect the new speaker, taking care with polarity (positive/negative), fasten with the original screws, and test audio at low volume before reassembling the trim.

Mounting Recommendations

• Ensure Correct Polarity: Confirm positive and negative speaker wires to avoid phase cancellation and reduced bass response.
• Check Connector Condition: Clean or replace corroded connectors and secure wiring to prevent rattles or intermittent contact.
• Use Original Fixings: Reuse factory screws and mounting cups where possible; if adapters are required, fit them securely to maintain sealing against moisture.
• Test Before Reassembly: Power the speaker briefly at low volume to verify operation and polarity prior to closing panels.
• Protect Against Moisture: In door or rear deck locations prone to water ingress, ensure sealing foam and vapor barriers are intact.

Most Common Failure Causes

Speakers of this type typically fail due to foam surround degradation with age, torn or punctured cones, voice-coil damage from over-powering or distortion, and water ingress or corrosion of terminals. Mechanical damage during door-panel removal or poor wiring connections can also cause intermittent or permanent faults.

Technical Information

• Manufacturer: Stellantis
• Model: Citroën C3 Picasso; Citroën C4 Picasso; Citroën C5 X7; Peugeot 207; Peugeot 407
• Product Codes: 9664955980, 6562X3
• Other Numbers: Diameter 165 mm

Notes For Professionals

This speaker is an OEM-style replacement intended for direct-fit installations in compatible vehicles. When performing replacements in a professional workshop, inspect the entire audio circuit (head unit output, amplifier if present, and in-line crossovers) to diagnose underlying causes of speaker failure and avoid repeat issues.

OEM 165 mm car speaker designed as a direct replacement for a range of Citroën and Peugeot models. Ideal for workshops and DIY mechanics who need a reliable, factory-fit sound solution that restores clarity and bass response in doors or rear parcel shelves. Often searched by OE codes 9664955880, 6562X2 and 6562C5—useful keywords for quick lookup in parts catalogs and search engines.

Benefits And Application

This speaker delivers authentic OEM fit and sound characteristics, making it suitable for restoring factory audio performance after a failed unit. It is constructed to match original mounting points and connector types used on many Citroën and Peugeot vehicles, reducing modification time during replacement. Typical uses: front door replacement, rear shelf upgrade, or restoring audio after water damage or cone deterioration.

Technical Information

• Manufacturer: Stellantis
• Model: Compatible With Various Citroën And Peugeot Models (See List Below)
• Product Codes: 9664955880, 6562X2, 6562C5
• Additional Numbers: 6562C5, 6562X2
• Diameter: 165 mm

Compatible Models

• Citroën C2
• Citroën C3
• Citroën C3 Picasso
• Citroën C3 Pluriel
• Citroën C4 Picasso
• Citroën C5
• Citroën C5 X7
• Citroën C8
• Citroën Xsara Picasso
• Peugeot 207
• Peugeot 3008 I
• Peugeot 308
• Peugeot 407
• Peugeot 5008 I
• Peugeot 807

How Replacement Is Performed

• Remove Interior Trim Or Door Panel Carefully To Access The Speaker—Follow Vehicle-Specific Clips And Screw Locations.
• Disconnect The Speaker Connector And Remove Mounting Screws Or Rivets Holding The Old Speaker.
• Compare Mounting Depth And Connector Type; If Required, Use An Adapter Plate Or Harness To Match Factory Fixings.
• Install The New Speaker, Observe Polarity (Positive/Negative), And Secure All Fasteners Evenly To Avoid Panel Rattles.
• Test The Speaker At Low Volume Before Reassembling Trim To Confirm Correct Operation And No Unwanted Noise.

Installation Recommendations

• Use Original-Style Fixings Or Correct Adapters To Preserve Fit And Avoid Distortion.
• Check Wiring And Connector Condition; Replace Corroded Terminals And Ensure Good Grounding.
• Seal Door Speaker Openings Against Moisture With Appropriate Gaskets Or Foam Tape To Extend Service Life.
• When Replacing In Doors With Integrated Tweeters Or Crossovers, Verify Crossover Connections To Maintain Sound Balance.
• Test Audio System After Installation At Moderate Volume; Avoid High Power Checks That Could Damage A New Speaker.

Why The Part Most Often Fails

Common failure causes include cone Or Surround Deterioration Due To Age And UV/Heat Exposure, Water Ingress From Door Seals Causing Corrosion, Voice Coil Damage From Overpowering Or Short-Term High Volume, And Mechanical Damage From Impacts. Faulty Wiring Or Loose Connectors May Also Produce Distortion Or Intermittent Operation.

Practical Notes For Mechanics And DIYers

Searches Frequently Use OE Numbers (9664955880, 6562X2, 6562C5), So Including These Codes In Orders Or Catalog Queries Speeds Identification. The Speaker Is Supplied As A Direct-Fit Replacement For The Models Listed, Minimizing Installation Time In Professional Or Home Workshops.

This original-fit 165 mm (6.5″) speaker is a direct replacement for a range of Citroën and Peugeot models and is commonly searched by OE numbers 9664955980 and 6562X3. Designed for installers and DIY mechanics who demand reliable audio performance and perfect fitment, the unit restores factory sound staging and integrates with existing door mounts and wiring harnesses. Ideal for repairing blown or degraded factory speakers without modifications to the vehicle.

Key Benefits

• Direct fit for listed Citroën and Peugeot models – no cutting or adapter plates required in most installations.
• Standard 165 mm (6.5″) diameter that matches common factory mounting locations.
• OE numbers on listings help fast identification (9664955980, 6562X3).
• Balanced sound reproduction suitable for original audio systems and entry-level upgrades.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Citroën C3 Picasso; Citroën C4 Picasso; Citroën C5 X7; Peugeot 207; Peugeot 407
• Product Codes: 9664955980; 6562X3
• Additional Numbers: 6562.X3 (alternative notation); 165 mm

Installation Recommendations

Disconnect the battery before starting work to avoid short circuits. Remove the door card or speaker grille to access the factory speaker, unplug the wiring connector and unscrew the original unit. Compare the new speaker with the old one for mounting hole alignment and connector type. Transfer any factory foam gasket or mounting plates to ensure a tight seal and avoid air leaks that degrade bass response. Reconnect the speaker, secure screws evenly without overtightening to prevent frame warping, and test at low volume before reassembling the door. Use basic hand tools (screwdrivers, trim tools, socket set) and allow 30–90 minutes per door depending on vehicle trim. For vehicles with factory amplifiers or crossovers, verify polarity and connector pinout before final installation.

Why This Part Most Often Fails

• Age-Related Deterioration: Foam surrounds and spider suspensions dry out and crack over time, causing loss of excursion and distortion.
• Moisture Ingress: Door speakers are exposed to humidity and water from window seals; corrosion or cone delamination can occur.
• Overpowering: Excessive amplifier clipping or high volume listening can burn the voice coil, leading to partial or complete failure.
• Mechanical Damage: Pins, torn cones, or a damaged dust cap result from impact during door disassembly or foreign objects in the speaker.

Replacing the speaker with a correct 165 mm OE-fit unit restores audio clarity and prevents further damage to related components. This part is commonly searched by its OE codes, so listing those numbers when searching will help you find the correct replacement quickly.

Genuine Citroën/Peugeot/DS speaker – OEM 9803506480

Are you looking for a replacement for a crackling or malfunctioning door speaker? This genuine PSA speaker with part number 9803506480 is exactly the part you need. It is a used, carefully inspected OEM part from disassembly – it fits without modifications, retains the factory sound and uses the original connector and mounting.

Key benefits
– Original PSA part (OEM) – certainty of compatibility and easy installation
– Plug & Play – uses the factory connector and brackets in the door
– Verified from operation – used, functional condition, visually inspected
– Suitable as a direct replacement for the original speaker code 9803506480

Vehicle compatibility
– Citroën: C-Elysée (from 2012), C4 II B7 (2010–2018), C4 Picasso/Grand C4 Picasso (2013–2018)
– DS Automobiles: DS4 (2011–2018)
– Peugeot: 301 (from 2012), 3008 I (2009–2016), 5008 I (2009–2016), 308 T9 (from 2013)
Note: Location usually front/rear door depending on equipment. Please compare the OEM number and shape with your original speaker before ordering.

Technical information
– OEM part number: 9803506480 (PSA)
– Type: wideband door speaker (original factory design)
– Mounting: original PSA plastic frame, three-point screwing (typical for PSA)
– Connection: original PSA 2-pin connector
– Basket diameter: approx. 165 mm (6.5″) – standard size for PSA doors
– Impedance/Power: PSA typically 4 Ω; performance corresponds to the factory audio system
Note: Parameters may vary depending on specific equipment. To be sure, compare with the original part in the car.

Condition and packaging
– Condition: used, fully functional, no extra accessories
– Package: 1pc speaker (without grille/door frames unless otherwise stated)

How to verify the correctness of the part
– Check the number on your original speaker – it must match 9803506480
– Compare the connector and mounting pitches according to the photos
– In case of uncertainty, send us the VIN – we will verify compatibility

Typical symptoms for replacement
– Grunting, sound dropouts, distortion at certain volumes
– Stiff/damaged diaphragm hinge or malfunctioning coil
– Frequent damage after the door is flooded or after long-term loading

Searched keywords
Citroën Peugeot DS door speaker, OEM 9803506480, door speaker 165mm, original PSA speaker, replacement speaker 4 Ω

This original speaker 9803506480 is an ideal choice for auto mechanics and DIY enthusiasts who want to quickly and cleanly return the car to factory sound without the need for installation modifications.

Overview

OEM-style replacement speaker compatible with a range of Citroën and Peugeot models. Supplied under part references 9665245180 and 6562X2, this 165 mm (approx. 6.5″) loudspeaker is intended for technicians and experienced DIY installers who need a direct-fit unit to restore factory audio performance. Common search terms: Citroën speaker 9665245180, Peugeot 6562X2, 165 mm car speaker, replacement door speaker.

Technical Information

• Manufacturer: Stellantis (Citroën/Peugeot)
• Model: Citroën C2; Citroën C3; Citroën C3 Pluriel; Citroën C4 II; Citroën C4 Picasso; Peugeot 3008 I; Peugeot 308; Peugeot 5008 I
• Product Codes: 9665245180, 6562X2
• Additional Numbers: N/A

Fitment And Application

The 165 mm diameter makes this speaker suitable as a direct replacement in door or factory speaker locations on the listed Citroën and Peugeot models. Exact installation position (front door, rear door, or dash) depends on vehicle trim and original equipment layout. This part is typically used where the original OEM speaker size is 165 mm.

Installation Recommendations

Recommended for professional installers and competent DIYers. Basic installation steps:

• Prepare: Park the car on a level surface and disconnect the negative battery terminal to avoid short circuits while working on vehicle electrics.
• Access: Remove the door trim panel or speaker grille following the vehicle manufacturer’s procedure to avoid damaging clips and wiring.
• Remove Old Unit: Unscrew the original speaker, carefully unplug the speaker connector and note any spacers or adapters used.
• Fit New Speaker: Transfer any necessary mounting brackets or gaskets, connect the speaker harness, and secure the new speaker with the original fixings.
• Test: Reconnect the battery and test the speaker at low volume to confirm correct polarity and operation before reassembling the door trim.
• Finish: Refit the trim and confirm all clips and screws are secured.

Common Failure Causes

Car speakers typically fail due to mechanical wear and environmental exposure rather than a fixed service interval. Typical causes include:

• Cone or foam surround deterioration caused by age and UV exposure.
• Water ingress from door seals or window channels leading to corrosion or voice coil damage.
• Blown voice coil from prolonged high-volume use or amplifier faults.
• Connector corrosion or broken wiring affecting signal delivery.
• Physical damage from improper removal/installation or impact.

Why Choose This Part

This speaker is offered as an OEM-compatible replacement referenced by common part numbers used by Citroën and Peugeot owners and workshops. It provides a straightforward route to restore audio clarity and balance without the need for custom adapters, saving fitment time for mechanics and confident DIYers. Always confirm the speaker size and mounting pattern on the vehicle before purchase to ensure a correct fit.

Notes For Mechanics And DIYers

Part numbers are frequently used when sourcing replacement speakers. Searching for 9665245180 or 6562X2 will help locate the exact item. Keep original mounting hardware and observe correct speaker polarity during installation to avoid phase issues. If the vehicle has an upgraded audio system or amplifier, verify compatibility to prevent overloading or underpowering the new speaker.

High-quality 165 mm replacement speaker designed for a wide range of Citroën and Peugeot models. This unit is a direct-fit audio component commonly sought under original part numbers and aftermarket references (see Technical Information below). Ideal for professional workshops and experienced DIY enthusiasts who need a reliable, easy-to-install speaker to restore factory sound or upgrade a worn original. The compact 165 mm size delivers clear midrange reproduction and integrates seamlessly with the vehicle’s original mounting points and wiring harness.

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C2; Citroën C3; Citroën C3 Picasso; Citroën C3 Pluriel; Citroën C4 Picasso; Citroën C5; Citroën C5 X7; Citroën C8; Citroën Xsara Picasso; Peugeot 207; Peugeot 3008 I; Peugeot 308; Peugeot 407; Peugeot 5008 I; Peugeot 807
• Product Codes: 9664955880, 6562X2, 6562C5
• Other Numbers: 6562.C5, 6562.X2, 6562C5, 6562X2, 9664955880
• Size: 165 mm (6.5″) Diameter

Installation Recommendations

• Prepare Tools: Panel removal tools, Phillips/torx screwdriver set, socket set, and a multimeter for polarity check.
• Safety First: Disconnect the negative battery terminal before starting work to avoid short circuits and accidental airbag deployment when removing trim near A‑pillars.
• Remove Trim: Carefully remove the door card or trim panel following the vehicle manufacturer’s procedure to avoid breaking clips.
• Disconnect Old Speaker: Unscrew the original speaker, unplug the wiring harness, and note the polarity of the connectors or mark the positive lead.
• Fit New Speaker: Mount the replacement speaker into the original speaker aperture using the factory mounting points. Ensure the speaker sits flush and is secured without over‑tightening screws.
• Reconnect And Test: Reconnect the wiring (observe polarity), temporarily reconnect the battery, and test the speaker at low volume to confirm correct operation before reassembling the trim.
• Sealing And Vibration: Use a foam gasket or anti‑vibration pad if available to reduce rattles and improve acoustic sealing.

Why The Part Fails Most Often

• Age And Wear: Foam surrounds and suspension materials deteriorate over time, leading to distortion or rattling.
• Water Ingress: Moisture from door leaks or condensation can damage the cone, voice coil, or cause corrosion of terminals.
• Overdrive/Amplifier Faults: Excessive power or amplifier clipping can burn the voice coil, producing a blown speaker.
• Mechanical Damage: Physical impact during door repairs or improper installation can deform the cone or magnet assembly.
• Connector Corrosion Or Loose Contacts: Poor electrical connection causes intermittent sound or complete failure.

Search Tip: Many customers search by part numbers such as 9664955880, 6562X2 or 6562C5 — including these codes in your search will help you find the correct replacement quickly.

Description

This replacement 165 mm speaker is designed for a range of Citroën and Peugeot models and offers a direct-fit audio upgrade or OEM-equivalent replacement. Constructed to match original mounting points and impedance requirements, it delivers clear midrange and bass support for factory audio systems. Ideal for professional workshops and DIY mechanics who search by part number (9635014780 / 6562X2 / 6562C5) when locating the correct unit for their vehicle.

Compatibility

• Citroën C2
• Citroën C3
• Citroën C3 Pluriel
• Citroën C8
• Peugeot 3008 I
• Peugeot 307
• Peugeot 5008 I
• Peugeot 607
• Peugeot 807

Technical Information

• Manufacturer: Stellantis / Citroën / Peugeot
• Model: Citroën C2, Citroën C3, Citroën C3 Pluriel, Citroën C8, Peugeot 3008 I, Peugeot 307, Peugeot 5008 I, Peugeot 607, Peugeot 807
• Product Codes: 9635014780
• Other Numbers: 6562X2, 6562C5
• Diameter: 165 mm

Installation Recommendations

Remove the interior trim or door panel to access the speaker. Unscrew the speaker fasteners, carefully unplug the electrical connector, and note polarity before removing. Fit the new speaker aligning it to the original mounting holes, reconnect the connector, and secure with the original screws. Test the speaker at low volume to confirm correct operation and polarity before reassembling the trim. Use foam or rubber sealing rings and sound-deadening material where appropriate to improve bass response and reduce rattles. When working near airbags or electrical systems, take standard safety precautions and disconnect the negative battery terminal if required by your workshop procedures.

Why This Part Fails Most Often

Typical causes of speaker failure include cone or surround deterioration with age, water ingress from door seal leaks, corrosion at connectors, and voice-coil damage from excessive volume or amplifier faults. Mechanical wear and material fatigue over many years of use are common—especially in vehicles exposed to moisture or extreme temperatures. Replacement restores clarity and prevents damage to associated audio electronics caused by a failing speaker.

Practical Tips For Mechanics And DIYers

• Always verify polarity and connector fit before final assembly to avoid phase issues.
• Inspect wiring and connectors for corrosion; clean or replace as necessary.
• Consider upgrading door seals or adding damping material if you notice water ingress or rattling.
• Check the factory amplifier output if a new speaker fails quickly—electrical faults can destroy replacement speakers.

Ordering Information

Searchable by OEM code 9635014780 and cross-references 6562X2 / 6562C5. Use these numbers to quickly locate the correct speaker for the listed Citroën and Peugeot models.

High-quality 165 mm speaker designed for Citroën and Peugeot vehicles, supplied with OEM reference numbers 9634827380, 9664955980 and 6562X3. This direct-fit speaker is suitable for door and rear applications on a number of Stellantis models and offers reliable sound reproduction for workshop replacements or DIY audio repairs. Ideal for mechanics and enthusiasts looking for an exact-fit spare part under the original part numbers.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Speaker 165 mm
• Product Codes: 9634827380, 9664955980, 6562X3
• Additional Numbers: 165 mm

Compatibility

Commonly Used On: Citroën C3 Picasso, Citroën C4, Citroën C5, Peugeot 207, Peugeot 307, Peugeot 407. Fits vehicles that use a 165 mm OEM speaker with the listed part numbers. Always check speaker mounting depth and connector type when replacing factory units.

Installation Recommendations

• Prepare Tools: Panel trim tools, Phillips/Torx screwdriver or socket set depending on vehicle, multimeter for polarity check.
• Remove Door Trim: Carefully remove interior trim and clips to access the speaker. Keep fasteners organized for reassembly.
• Disconnect Wiring: Unplug the speaker connector. If the connector differs, use an adapter harness to avoid cutting factory wiring.
• Swap Speaker: Remove old speaker, compare mounting holes and depth. Fit new speaker, ensure correct polarity (+ / −) to avoid phase issues.
• Secure And Seal: Torque screws evenly to avoid deformation. Use foam gasket or sealing ring to prevent air leaks and rattles.
• Test Before Reassembly: Play audio at low volume to verify connection and movement. Refit trim panels and check for rattles at normal listening levels.
• Safety Note: Disconnect the negative battery terminal if working near multiple electrical circuits to avoid short circuits or accidental airbag deployment when removing trim.

Why The Part Typically Fails

• Moisture Ingress: Door speakers are exposed to humidity and splash water; moisture causes corrosion of terminals and deterioration of the cone or surround.
• Age And Material Degradation: Surrounds and adhesives dry out over years, leading to tears, loss of excursion, or buzzes and rattles.
• Overpowering And Clipping: Excessive amplifier power or prolonged clipping can burn the voice coil and render the speaker inoperative.
• Mechanical Damage And Foreign Objects: Improper door panel removal or debris can damage the cone or spider.
• Connector And Wiring Faults: Corroded connectors or broken wires result in intermittent sound or no sound at all.

This speaker is a practical replacement for workshops and DIY repairs where the original part number is used as the primary search term. Verify physical fitment (mounting diameter, depth and connector) before installation to ensure a trouble-free swap and best possible audio performance.

This 165 mm (6.5″) replacement speaker is intended for use in a range of Citroën and Peugeot models and is commonly referenced by part numbers 9634826880, 6562X2 and 6562C5. Designed for professional workshops and experienced DIY mechanics, it provides a direct-fit replacement for factory door and rear parcel shelf speakers. The speaker restores correct acoustic balance in factory audio systems and is a straightforward swap for original equipment units when the original speaker has failed or degraded.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: See Fitment List Below
• Product Codes: 9634826880, 6562X2, 6562C5
• Additional Numbers: Diameter 165 mm (6.5″)

Fitment

Compatible with a number of Citroën and Peugeot vehicles (verify by comparing part numbers and speaker size on the original unit):

• Citroën C4
• Citroën C5
• Citroën C8
• Citroën Xsara
• Citroën Xsara Picasso
• Peugeot 207
• Peugeot 3008 I
• Peugeot 307
• Peugeot 407
• Peugeot 5008 I
• Peugeot 807

Installation Recommendation

• Disconnect the negative battery terminal before beginning work when removing interior trim components to avoid accidental short circuits and to reduce risk when working near airbags.
• Remove the door panel or parcel shelf trim carefully, retaining all clips and screws. Peel back any moisture barrier with care to avoid damage.
• Unplug the speaker connector and note polarity (positive/negative). Unscrew the original speaker and remove it from the mount.
• Fit the replacement speaker into the original location. Ensure the mounting holes and connector orientation match the factory position; use supplied adapters if necessary.
• Before full reassembly, test the speaker at low volume to confirm correct operation and polarity. Refit the moisture barrier and interior trim panels, securing all fasteners and clips.
• Use correct tools and, where needed, suitable sealing or anti-vibration materials to prevent rattles and water ingress.

Why The Part Most Often Fails

• Age-Related Wear: Foam surrounds and spider assemblies dry out and crack over time, causing distortion or loss of movement.
• Moisture Ingress: Water from leaked door seals or wet environments causes cone delamination, corrosion of terminals and short circuits.
• Overpowering: Sustained high volume or amplifier clipping can burn the voice coil or damage the cone assembly.
• Mechanical Damage: Impact or improper removal/installation can deform the cone or magnet structure.
• Connector Corrosion: Poor electrical contact due to corroded plugs or wiring corrosion reduces performance or causes intermittent sound.

Notes

Many customers search using OE part numbers (9634826880 / 6562X2 / 6562C5) — compare the code and diameter of your original speaker before ordering to ensure fitment. This unit is supplied as a direct replacement for the listed applications and is intended for professional or experienced DIY installation.