151799 – Used Parts Vendor

Fuel tank cap Peugeot 307 KSUD 9643083777 151799

Tue, 27 Jan 2026 03:04:28 +0000

Tank cover PEUGEOT 307 I and II
KSU color – OAKLAND GREEN PAINT
We have different colors

Part description

Used tank cap/cover for Peugeot 307 cars. It serves to cover the filling space and to preserve the original appearance of the bodywork. Thanks to the specified color KSU (Oakland green paint), it is particularly suitable where you are dealing not only with function, but also with matching the color of the body.

The part is identifiable by the original PSA numbers, which makes it easier to find the correct version in the catalog even when comparing with the old part.

Technical information

Manufacturer: Stellantis (Citroën / Peugeot)
Model: Peugeot 307 I and II
Other numbers: KSUD (KSU color – Oakland green paint)

Product codes

Product codes: 9643083777, 151799, KSUD

Installation recommendations

Generally/typically for the tank cap/cover it is a simple replacement, but the exact procedure may vary depending on the design (attachment, cable, hinge/joint, locking type). Take the procedure below as a general recommendation.

1) Before assembly

Compare the new part with the old one: shape, attachment method, any cable/harness, lock or stops.
Check the condition of the paintwork and edges – for cracks, broken handles or deformations.
Verify match by part numbers: 9643083777 / 151799 (or KSUD designation).

2) Necessary tools and materials

A basic set of hand tools (typically screwdrivers/bit attachments depending on the attachment)
Plastic pry bar for disassembly (if you need to loosen covers/upholstery in the area)
Cleaning agent and cloth for contact surfaces

3) Step-by-step assembly procedure

Secure the car against movement and work in a clean, well-lit area.
Open the tank lid/cover area.
If the lid/cover is attached with a cable, first note its routing and method of attachment.
Remove the fastening of the original part (typically screws, pin/pin or hinged attachment – depending on the design).
Carefully remove the old part so as not to damage the surrounding paint and the edges of the bodywork.
Clean the mating surfaces and check that nothing prevents proper mating (dirt, adhesive residues, etc.).
Place the new part in the correct position and check the fit.
Fix it in the same way as the original part.
If a cable/lanyard is present, reattach it and check that it does not pinch anywhere.
Open/close several times and verify smooth operation without rubbing.

4) Post-assembly checks and function verification
- Check that the part fits correctly, does not stick out anywhere and does not make contact that could damage the paintwork.
- Verify that the opening/closing is smooth and the handles hold without play.
5) The most common assembly mistakes + how to avoid them
- Conversion of design (different mounting/dimension): always compare with the old part and follow the numbers 9643083777 / 151799.
- Paint scratches during disassembly: use a plastic pry bar and work carefully.
- Bad routing or cable pinching: check movement and free passage before tightening.
- Not landing due to dirt: clean the landing surfaces before assembly.
Reasons why the part is damaged
- Mechanical damage during refueling (impact, careless handling).
- Broken handles due to repeated stress or careless opening.
- Paint damage (scratches, peeling) from dirt and friction.
- Aging of plastic – brittleness of the material due to UV radiation and weather effects.

Fuel tank cap Peugeot 307 KMFD 9643083777 151799

Mon, 26 Jan 2026 03:07:29 +0000

Tank cover PEUGEOT 307 I and II
Color KMF – RECIFE BLUE PAINT
We have different colors in stock

Part description

Used tank cap/cover for Peugeot 307 cars, intended as a replacement after damage, loss or replacement due to aesthetics (e.g. different color). Thanks to the specified color code KMF (Blue Recife paint), it is suitable for bodywork repairs, where appearance and correct fitting of the part are important.

The part is from the bodywork category – tank cap. If you are looking for a specific design, follow the product number and the KMF designation.

Technical information

Manufacturer: Stellantis (Citroën/Peugeot)
Model: Peugeot 307 I and II
Other numbers: KMFD
Color: KMF – Blue Recife lacquer
Type of part: tank cap/cover (body)

Product codes

Product codes: 9643083777, 151799

Installation recommendations

Generally/typically for the tank cap/cover, the replacement is simple, but it is important to check the fit, shape and possible cable/pin connections. Exact steps may vary by car model.

1) Before assembly

Compare the new lid with the old one: shape, dimensions, attachment, hinge/axes and any cable/safety (if part of the design).
Check the condition of the edges and locks – cracks, broken lugs and deformations can cause a poor fit.
Verify the KMF color code if you are dealing with a shade match.

2) Necessary tools and materials

Basic set of screwdrivers / bits (depending on the mounting design)
Plastic pry bars for dismantling (for gentle work with body parts)
Cleaning agent and cloth (for contact surfaces)
Or fine lubricant for the mechanism (only if it is common and suitable for the given design)

3) Step-by-step assembly procedure

Secure the vehicle against movement and work in a clean, well-lit area.
Open the cover/tank area (depending on the car model) and access the lid.
If the lid is connected by a cable or fuse, first note where it goes and where it is attached.
Carefully loosen the lid attachment (hinge/pins/screws – depending on the specific design).
Remove the original cap and check the butt on the body (if it is not cracked or bent).
Clean the seating surfaces and the surrounding area so that the lid fits properly.
Place the new cap into the mount in the same direction as the original piece.
Secure the attachment (snaps/pins/screws) and check that the lid moves smoothly.
If a cable/fuse is included, fasten it back and check that it is not pinching or pulling anywhere.
Open and close the lid several times to check the fit.

4) Post-assembly checks and function verification
- Check that the lid holds firmly and does not open by itself.
- Verify proper fit against the bodywork (joints, fit).
- After a short ride, check again whether the attachment has loosened.
5) The most common assembly mistakes + how to avoid them
- Similar part exchange – always compare shape and fit, refer to numbers 9643083777 and 151799.
- Breaking of lugs/pins during assembly – use plastic pry bars and do not use force.
- Poor fit due to dirt – clean the mating surfaces before assembly.
- Incorrect cable/fuse routing – note the routing before disassembly and verify free movement after assembly.
Reasons why the part is damaged
- Mechanical damage (broken hinges, cracked handles) due to careless handling or impact.
- Vandalism or forced opening.
- Plastic wear and fatigue cracks due to age.
- Weather effects and UV radiation – paint fading and material degradation.
- Faulty assembly (overtightening of the attachment, poor snapping) that leads to loosening or cracking.

Fuel tank cap Peugeot 307 9643083777 ETSC

Mon, 26 Jan 2026 03:05:35 +0000

Cap tank cover for PEUGEOT 307 cars
ETS color – CENTRE GRAY PAINT
We have different colors in stock

Part description

Used tank cover intended for Peugeot 307. It serves to close the space of the filler neck and at the same time completes the appearance of the body. This piece is in ETS – Cendre Gray Lacquer, which is handy when replacing a damaged or lost lid.

The advantage is the availability according to the product number (OEM), which will speed up the search for the right part during the repair.

Technical information

Manufacturer: Stellantis (Citroën/Peugeot)
Model: Peugeot 307
Other numbers: 151799, ETSC

Product codes

Product codes: 9643083777

Installation recommendations

Generally/typically for the fuel cap, it is a simple replacement without special equipment, but the exact procedure may vary depending on the design and equipment of the car.

1) Before assembly

Compare the new cap to the old piece: shape, fit, hinge/axis, latch and overall fit profile.
Check the condition of the paintwork and edges (scratches, cracks, broken handles).
Verify that the codes on the part correspond to the desired design: 9643083777, or 151799, ETSC.
Inspect around the tank/body opening for deformation or dirt (could prevent proper closing).

2) Necessary tools and materials

A clean cloth and a mild cleaner to remove dirt from the contact surfaces
Plastic pry bars (if it is necessary to carefully release the cover/handle without damaging the paintwork)
Gloves

3) Step-by-step assembly procedure

Secure the vehicle against movement and work in a clean, well-lit area.
Open the tank cover.
If the original cap is still present, check how it is attached (hinge, pin, clip).
Carefully remove/unclip the old cap so as not to damage the surrounding paintwork.
Clean the contact surfaces and the attachment area from dust and dirt.
Place the new cap in the holder in the same position as the original part.
Snap/seat the mount gently (without force); the lid must close smoothly.
Try opening and closing several times, observe the smoothness of the movement and the seating of the edges.
Check the fit with the body – the cap should not protrude or be “sunk”.

4) Post-assembly checks and function verification
- Check that the lid is firmly in place and does not open by itself.
- Make sure it doesn’t rub against the bodywork or scratch the paint.
- After the first ride, check again that the attachment is still tight and the cap fits correctly.
5) The most common assembly mistakes + how to avoid them
- Forcible snapping → first align the position of the hinge/pin, only then install it.
- Paint scratches → use a plastic pry bar and work over a cloth.
- Bad fit → check if there is no bent bracket/handle or dirt in the contact areas.
- Ignoring cracked mounts → carefully check all locking elements before assembly so that the lid holds securely.
Reasons why the part is damaged
- Mechanical damage during refueling (impact, careless handling, resting the gun).
- Breaking of the handles due to the age of the plastic and repeated opening.
- Paint damage due to scratches, stones or inappropriate cleaning.
- Vandalism or loss of the piece (torn off, stolen, misplaced and then dropped).

Tank cap Peugeot 307 9643083777 EGE

Mon, 26 Jan 2026 03:05:35 +0000

Cap tank cover for PEUGEOT 307 cars
Color EGE BLUE CHINE
We have different colors in stock

Part description

Used fuel tank cover for Peugeot 307 in EGE – blue Chine color. It serves to close the filler neck and at the same time completes the appearance of the bodywork. Search by part number makes it ideal if you need to replace a damaged or lost piece and want to be sure of the correct design as per the label.

Note about the color: this piece is in the shade EGE, at the same time other colors are available (in stock) depending on the materials.

Technical information

Manufacturer: Stellantis (Citroën/Peugeot)
Model: Peugeot 307
Other numbers: 151799, EGE

Product codes

Product codes: 9643083777

Installation recommendations

Generally/typically for the tank cap/cover, the following applies: the exact method of attachment may vary depending on the car design and the specific design of the cover, so always follow the way the original part was installed.

1) Before assembly

Compare with the old part: shape, attachment, seating surfaces and color code match (EGE) if you are looking for appearance.
Check that the latches/grips are not damaged and that the lid fits properly.
Clean the contact surfaces of dirt so that the cover fits flush after assembly.

2) Necessary tools and materials

Clean cloth and gentle cleaner (to remove dirt from contact surfaces)
Typically plastic pry bars (if needed to release caps/clips without damaging the paintwork)

3) Step-by-step assembly procedure

Open the lid area and ensure good access to the attachment.
If you remove the old cap, loosen it carefully so as not to damage the surrounding paintwork.
Clean the surroundings and the landing surfaces (dust and dirt often cause a bad landing).
Check the butt/mount on the body for cracks or wear.
Place the new cap in the correct position and align it according to the shape and guide elements.
Push gently to snap/lock (without force).
Check that the cap fits evenly with the body and does not rub anywhere.
Perform repeated opening/closing and check that the mechanism holds and does not move.

4) Post-assembly checks and function verification
- Check for fit and stability – the lid must hold firmly and should not have any play.
- Verify that the lid opens/closes smoothly and without stuttering.
5) The most common assembly mistakes + how to avoid them
- Force snapping → can break handles; always align the position first and only then push.
- Mounting over dirt → does not fit and rub against the bodywork; clean the contact surfaces before assembly.
- Unchecked counter parts (worn handle on the car) → the lid does not hold well; before assembly, check the condition of the attachment on the car.
Reasons why the part is damaged
- Mechanical damage during refueling (impact, careless handling).
- Fatigue of plastic handles and latches over time (repeated opening/closing).
- Frost damage – embrittlement of the plastic and subsequent cracking during handling.
- Abrasion and paint damage due to dirt between the lid and the body or poor fit after previous assembly.
- Loss of a part after failure to finish or damage to the attachment.

Tank cap cover Peugeot 307 EZWD 9643083777 151799

Mon, 26 Jan 2026 03:03:05 +0000

Cap tank cover for PEUGEOT 307 I and II
Color EZWD – Gray FER
We have different colors in stock

Part description

Used tank cover designed for Peugeot 307 (I and II). It is a body part that protects the fuel filler neck from dirt and weather and at the same time completes the appearance of the car in the area of the tank cap.

Delivered version is in EZWD (grey FER) color. Thanks to the listed product numbers, searching and pairing with an existing part is quick and clear.

Technical information

Manufacturer: Stellantis (Citroën / Peugeot)
Model: Peugeot 307 I and II
Other numbers: EZWD

Product codes

Product codes: 9643083777, 151799

Installation recommendations

Generally/typically for the tank cover cap it is a simple replacement without special service equipment. The exact design of the attachment may vary depending on the specific version of the car.

1) Before assembly

Check that product numbers 9643083777 / 151799 and EZWD color match the required part.
Compare the shape, attachment and any elements (hinge/latch) with the old lid.
Verify that the part is not cracked and that the attachment is not squeezed or deformed.

2) Necessary tools and materials

Clean cloth
Gentle body cleaner (optional)
Basic hand tools according to the type of mounting on the car (typically small screwdrivers/torxes – depending on the design)

3) Step-by-step assembly procedure

Open the tank cover/flap and ensure good access to the part.
Inspect the attachment of the original lid and determine whether it is attached by a pin, screw or latch (depending on the design).
If there is dirt in the area, clean the contact surfaces with a cloth.
Remove the original cap carefully so as not to damage the surrounding paint/bodywork.
Compare the old and new piece “on the table” – especially the orientation of the attachment and the bearing edges.
Place the new cap in the same position as the original one.
Fix the lid in the original attachment (snap/screw depending on design).
Try opening and closing – operation must be smooth, without rubbing.
Check the fit with the surrounding bodywork (joints, fit).
Wipe off any fingerprints and dirt from the surface of the part.

4) Post-assembly checks and function verification
- Verify that the lid holds closed properly and that it “sits” in the opening without play when closed.
- After a short ride, check whether there is no spontaneous loosening of the mounting or resonances.
5) The most common assembly mistakes + how to avoid them
- Conversion of designs: always compare the shape and fit with the old part and follow the numbers 9643083777 / 151799.
- Paint damage during disassembly: work carefully, ideally with clean tools and without prying against the edge of the bodywork.
- Poor fit: after assembly, check fit and test opening/closing repeatedly.
Reasons why the part is damaged
- Mechanical stress (frequent opening/closing, careless handling).
- Bums and abrasions in the body area (parking incidents, contact with an obstacle).
- Aging of the material and attachment fatigue (cracking of plastic, squeezing of hinges/latches).
- Influence of weather and chemistry (UV radiation, frost, washing chemistry), which deteriorate the appearance and strength of the part.

Tank cap Peugeot 307 9643083777 KMFD

Mon, 26 Jan 2026 03:01:56 +0000

Cap tank cover for PEUGEOT 307 cars
Color blue metallic KMFD
We have different colors in stock

Part description

Original used fuel tank cap designed for Peugeot 307. This is a body part that ensures a clean and safe closure of the tank neck space and at the same time completes the look of the car. The piece offered is in the shade blue metallic (KMFD).

In practice, this part is often searched by product number – if you are comparing with the original cap, focus mainly on matching codes and design.

Technical information

Manufacturer: Stellantis (Citroën / Peugeot)
Model: Peugeot 307
Other numbers: 151799, KMFD

Product codes

Product codes: 9643083777

Installation recommendations

Generally/typically applies to replacing the tank cap/cover in passenger cars – the exact procedure may vary depending on the specific design of the car and the attachment mechanism.

1) Before assembly

Compare the new part with the old one: shape, fit, hinge/axes, stops and overall fit.
Check the match between the part codes (9643083777) and the KMFD shade if you are dealing with appearance.
Check the condition of the used part: cracks, broken handles, damaged edges and possible scratches in the paint.

2) Necessary tools and materials

Basic hand tools (typically screwdrivers / small ratchet attachments depending on design)
Plastic pry bar for removing upholstery/covers (if access is required)
Cleaning agent and cloth for cleaning the contact surfaces

3) Step-by-step assembly procedure

Ensure the vehicle is level and turn off the ignition.
Open the tank cover and check how the original part is attached (hinge, pin, possible screws/clips).
If there is dirt in the area, clean the area and the mating surfaces so that the new part fits properly.
Carefully release the attachment of the old lid (without force to avoid damaging the surrounding plastics/sheet metal).
Remove the old part and check that there is no clip/part of the pin left in the attachment point.
Place the new cap in the correct position and test the free movement of the hinge (without binding).
Put on and secure the attachment according to the design (snap/insert the pin/tighten if necessary).
Open and close the lid several times, check that it fits correctly with the body and holds in the closed position.
Perform a final fit check and clean the surrounding area if necessary.

4) Post-assembly checks and functional test verification
- Check that the cap is secure, does not rub anywhere, and is evenly seated when closed.
- Verify that it can be comfortably opened and closed repeatedly (without play and skipping).
5) The most common assembly mistakes + how to avoid them
- Forcible disassembly → use a gentle procedure, possibly a plastic pry bar, and look for hidden clips/securements.
- Not tightened/unsecured attachment → after assembly, try opening and closing several times so that the lid does not come loose.
- Poor fit (the part “fits crooked”) → recheck the seat in the hinge/pins and the correct position of the stops.
Reasons why the part is damaged
- Mechanical stress on the hinge – frequent opening, twisting or closing “by force”.
- Careless handling during refueling – hitting with a refueling gun or hitting an open cap.
- Damage to mounts/clips during disassembly or after a minor collision.
- Aging of the material and surface degradation (paint/scratches) due to the weather, dishwashers and UV radiation.

Tank cap Peugeot 307 9643083777 KSMC

Mon, 26 Jan 2026 03:01:56 +0000

Cap tank cover for PEUGEOT 307 cars
KSMC metallic green color
We have different colors in stock

Part description

This tank cover is intended for the Peugeot 307 and serves to securely close the fuel filler neck and protect the neck area from dirt and moisture. Thanks to the design in green metallic KSMC, it is also suitable for solving the appearance of the body after damage or loss of the original cover.

The part is also searched by original numbers, that is why the menu shows 9643083777 and 151799.

Technical information

Manufacturer: Stellantis (Citroën/Peugeot)
Model: Peugeot 307
Other numbers: 151799, KSMC

Product codes

Product codes: 9643083777, 151799, KSMC

Installation recommendations

Generally/typically for the tank cover cap, the replacement is simple, but it is important to check the mounting design and match with the original part (especially according to the part number and design).

1) Before assembly

Compare with the old part: shape, fitting, method of closing and markings/numbers (9643083777, or 151799).
Check that the lid body, hinge/handle is not damaged and that the lid fits properly.
Check color match (here KSMC metallic green).

2) Necessary tools and materials

Typically without tools (depending on design)
Clean cloth
A gentle cleaner to remove dirt around the throat (optional)

3) Step-by-step assembly procedure

Turn off the ignition and secure the vehicle against movement.
Open the fuel tank cover/flap.
Remove the original cap (unfold/unscrew depending on the design).
Check the seating surfaces around the filler neck and remove dust and dirt.
If the cap is attached to the handle/cable, check the condition of the attachment and prepare it for a new cap (according to design).
Place the new cap in the correct position.
Close the lid so that it fits properly and cannot be released by itself (depending on the type of closure).
Close the tank cover/flap and check that it doesn’t rub anywhere and that everything fits.

4) Post-assembly checks and test drive/function verification
- Check that the cap is firmly in place and that the tank cover/flap closes easily.
- After the first ride or refueling, double-check that the cap still fits properly and does not come loose.
5) The most common assembly mistakes + how to avoid them
- Exchanging another design – always compare the mount and part numbers (9643083777 / 151799).
- Incomplete closing – after assembly, try gently pulling/turning the cap to check that it holds.
Reasons why the part is damaged
- Mechanical damage during handling or careless closing.
- Loss of a part during refueling (put away outside the vehicle).
- Wear of attachment (hinge/grip) due to frequent use.
- Paint damage from abrasion, dirt or due to weather conditions.

Tank cap Peugeot 307 KTGA 9643083777 151799

Thu, 04 Dec 2025 03:10:20 +0000

Tank cover PEUGEOT 307 I and II
KTG color – HURRICANE GRAY PAINT

This part is a tank cap / cover for Peugeot 307 cars of the first and second generation. This is an original part from the PSA concern, suitable as a replacement for a damaged or missing cap, for example after an accident or corrosion of the original part. Thanks to the exact shape and original handles, it fits well into the original storage in the body, so that the correct closing and the appearance of the car are ensured.

The color of the part is marked with the KTG code – Hurricane gray metallic (KTG paint), which is suitable for Peugeot 307 cars painted in this shade. During assembly, the part can also be used on a different paint, if the owner is satisfied with the functionality and does not mind the difference in shade, but to preserve the appearance, we recommend using this cap on cars with the same color code.

Technical information:
Manufacturer: PSA CITROEN PEUGEOT
Model: Peugeot 307 (I and II)
Product codes: 9643083777, 151799
Other numbers: KTG, KTGA (color designation / part specification)
Location: body – fuel tank cap
Color: KTG – Hurricane gray lacquer

The part is suitable for auto mechanics and DIYers who are looking for a specific tank cap according to product codes and need to retain the original fit, shape and opening angle. A correctly chosen part will help prevent problems with leakage, poor closing or unsightly clearances around the lid.

Installation recommendations:
– Before disassembling the original lid, check the attachment – hinge, holders, springs and possibly cable/opening limiter.
– Carry out disassembly carefully to avoid damaging the plastic handles in the bodywork. In older cars, the plastic parts may be more fragile.
– Before installing the new cap, clean the contact surfaces and the area around the tank opening from dirt and corrosion so that the cap fits properly.
– Check the alignment of the lid with the bodywork – after assembly, the lid must be flush with the surrounding sheets when closed and should not rub against the bumper or the side of the car.
– After assembly, open and close the lid several times, check the operation of the hinge and any obstacles, so that there is no excessive stress on the plastic parts during normal use.

A correctly fitted tank cap protects the filler neck, keeps the tank area clean and at the same time preserves the original appearance of the Peugeot 307 car body.

Fuel Tank Cap Peugeot 307 9643083777 EQJB

Sat, 01 Feb 2025 04:07:03 +0000

The Fuel Tank Cap for Peugeot 307 is an essential component for maintaining the integrity of your vehicle’s fuel system. Designed specifically for the Peugeot 307 model, this cap ensures a secure seal that prevents fuel evaporation and leaks. If your current cap is damaged or lost, replacing it with this high-quality part will help keep your fuel system functioning properly and improve your vehicle’s performance.

Typically, fuel tank caps can wear out due to exposure to harsh environmental conditions, improper handling, or simply through age. A malfunctioning cap can lead to fuel spills, decreased fuel efficiency, and even trigger warning lights on your dashboard, making timely replacement important.

Technical Information:

Manufacturer: Peugeot
Model: 307
Product Codes: 9643083777
Other Numbers: 151799 EQJB

This fuel tank cap comes in the color EGJ – Santorini Blue Paint, matching the original look of your Peugeot vehicle. Installation is straightforward, involving merely removing the old cap and screwing the new one in place. No special tools are required, making it an easy task for both professional mechanics and car enthusiasts doing DIY repairs.

Fuel Tank Filler Cap Cover Peugeot 307 Estate 9643083777 EZAC

Sat, 01 Feb 2025 03:57:03 +0000

Fuel filler cover for PEUGEOT 307 Estate (SW). Color EZAC – Paint Grey Sidobre. We have various colors in stock.

This replacement fuel filler cover (fuel flap) is designed for Peugeot 307 Estate/Kombi (SW) and is a direct-fit exterior part ideal for professional workshops and DIY mechanics. Frequently searched under part numbers 9643083777 and 151799, this flap matches the vehicle’s bodyline and is finished in EZAC grey (Sidobre) paint. The part restores the vehicle’s appearance after damage and ensures the filler cap remains protected from dirt and moisture.

The fuel filler cover is an often-replaced body component after minor collisions, parking scrapes or corrosion. It is supplied painted in the specified color and can be ordered in different color variants to match your vehicle. Replacement is straightforward for an experienced technician and requires only basic tools.

Technical Information

Manufacturer: Stellantis (Citroën/Peugeot)
Model: Peugeot 307 Estate (Kombi / SW)
Product Codes: 9643083777, 151799
Other Numbers: Color Code EZAC (Grey Sidobre)

Function And Typical Faults

The fuel filler cover protects the fuel filler neck and cap from dirt, water and mechanical damage while keeping the vehicle exterior visually consistent. Most common faults include hinge or latch breakage due to impact, paint damage from scrapes or stone chips, and corrosion in regions with heavy road salting. Wear to the hinge or latch can prevent the flap from closing securely or cause it to hang unevenly.

Replacement Guide

Recommended for both professional garages and competent DIYers. Typical replacement steps:

Open the fuel flap and inspect the hinge and retaining fasteners.
Remove screws or clips securing the flap (use appropriate screwdriver or small socket set and plastic trim tool to avoid paint damage).
Disconnect any grounding strap or actuator if present and carefully remove the old flap.
Fit the new flap, align to the body panel and secure fasteners. Ensure the latch engages smoothly and the gap is even.
Perform final check: open/close several times, verify seal around filler neck and touch up paint if necessary.

Mounting Recommendations

Use a plastic trim tool to release clips to prevent scratching the paint.
Do not overtighten fasteners; tighten evenly so the flap sits flush with the body.
Lubricate the latch and hinge lightly with a corrosion-inhibiting grease during installation.
When matching body color, verify paint code (EZAC) before fitting; small color differences may appear between batches.

Why This Part Fails Most Often

The most frequent causes of failure are minor impacts (parking scrapes), broken hinges or latch mechanisms, and paint or corrosion damage from exposure to road salt and environmental conditions. Replacing the flap restores functionality and appearance without the need for larger body repairs.

Keywords: Peugeot 307 fuel filler cover, fuel flap Peugeot 307, 9643083777, 151799, EZAC grey fuel flap.

151799 – Used Parts Vendor

Fuel tank cap Peugeot 307 KSUD 9643083777 151799

Part description

Technical information

Product codes

Installation recommendations

Reasons why the part is damaged

Fuel tank cap Peugeot 307 KMFD 9643083777 151799

Part description

Technical information

Product codes

Installation recommendations

Reasons why the part is damaged

Fuel tank cap Peugeot 307 9643083777 ETSC

Part description

Technical information

Product codes

Installation recommendations

Reasons why the part is damaged

Tank cap Peugeot 307 9643083777 EGE

Part description

Technical information

Product codes

Installation recommendations

Reasons why the part is damaged

Tank cap cover Peugeot 307 EZWD 9643083777 151799

Part description

Technical information

Product codes

Installation recommendations

Reasons why the part is damaged

Tank cap Peugeot 307 9643083777 KMFD

Part description

Technical information

Product codes

Installation recommendations

Reasons why the part is damaged

Tank cap Peugeot 307 9643083777 KSMC

Part description

Technical information

Product codes

Installation recommendations

Reasons why the part is damaged

Tank cap Peugeot 307 KTGA 9643083777 151799

Fuel Tank Cap Peugeot 307 9643083777 EQJB

Fuel Tank Filler Cap Cover Peugeot 307 Estate 9643083777 EZAC

Technical Information

Function And Typical Faults

Replacement Guide

Mounting Recommendations

Why This Part Fails Most Often