Description

This OEM-style fuel filler cap cover is designed for Peugeot 807 and Citroën C8 models and is finished in factory color code KDD (Sand / Sable Bivouac). It restores the original appearance of the fuel door area after accidental damage or wear and guarantees a perfect visual match when the vehicle has the same paint code. Commonly searched under product codes 1485207080 and 151790, this part is suitable for professional workshops and DIY mechanics looking for a direct-fit replacement.

Compatibility And Fitment

• Peugeot 807
• Citroën C8

How To Replace

1. Open the fuel filler flap and locate the securing screws or clips on the inside of the filler door.
2. Carefully remove any trim or insulation pieces if present to gain access to the hinge and fasteners.
3. Unscrew or unclip the old cover, supporting the door to avoid dropping it and scratching surrounding panels.
4. Fit the new cover onto the hinge, align the mounting holes and secure with the original fasteners. Replace any damaged clips or screws with new OEM-equivalent items.
5. Check the flap operation, latch engagement and paint alignment. Make any minor adjustments before final tightening.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 807; Citroën C8
• Product Codes: 1485207080; 151790
• Additional Numbers: KDD (Color Code: Sand / Sable Bivouac)

Installation Recommendations

• Work On A Clean Surface: Protect surrounding panels with tape or cloth to avoid scratches during removal and installation.
• Replace Worn Fasteners: Old clips and screws often break during removal; fit new OEM-quality fasteners for a secure installation.
• Paint Touch-Up: If minor paint damage is present around the filler aperture, perform touch-up or blending to avoid corrosion and ensure color match.
• Test Operation: Verify smooth opening/closing and correct latch engagement after installation.
• Use Appropriate Tools: Small trim tools, Torx or Phillips drivers (depending on fastener type) and a torque-light hand are recommended.

Why This Part Commonly Fails

Fuel filler cap covers are exposed to everyday wear and external damage. The most frequent causes of failure are minor collisions or impacts in parking areas, broken or fatigued hinge clips, corrosion or paint degradation from road salts and UV exposure, and poor previous repairs. In many cases the cover itself is intact but mounting tabs or hinges are damaged, preventing correct alignment and secure closure.

Order this precisely matched fuel filler cap cover by referencing product codes 1485207080 or 151790 to ensure direct fitment and a factory-matching finish. Ideal for professional repair shops and experienced DIY mechanics who expect reliable, appearance-correct replacement parts.

This fuel filler cap cover (fuel filler flap / fuel door) is a direct-fit exterior replacement designed for Peugeot 807 and Citroën C8 models. Ideal for professional workshops and DIY mechanics, the part restores a factory-like finish to the rear quarter and matches the EZW grey metallic paint for an invisible repair. The item is frequently searched by part numbers 1485207080 and 151790, so using these codes will help you find the correct unit quickly.

Technical Information

• Manufacturer: Stellantis (Peugeot / Citroën)
• Model: Peugeot 807; Citroën C8
• Product Codes: 1485207080, 151790
• Other Numbers: EZW (Paint Code – Grey Metallic)

Features And Benefits

Designed to match factory contours and opening mechanisms, this filler cap cover provides an OEM-style appearance and fit. The painted EZW surface reduces the need for additional bodywork and helps preserve vehicle resale value. Suitable for collision repair, cosmetic restoration, or replacing worn or damaged filler doors.

Installation Recommendations

Replacement is straightforward for a competent technician or an experienced DIYer. Typical steps:

• Open the fuel filler door and, if present, remove the inner access trim or wheel-arch liner to reach mounting screws or clips.
• Unscrew or unclip the hinge fasteners; retain any reusable screws and spring mechanisms if undamaged.
• If the lock cylinder or rubber seals are to be transferred, remove these components carefully and refit to the new door.
• Align the new filler cover on the hinge, secure fasteners, and check door alignment and latch operation. Adjust hinge position before final tightening to prevent paint stress or misalignment.
• Recommended tools: Torx and Phillips drivers, trim clip pliers, non-marring pry tool, and torque control for body screws. Allow approximately 20–40 minutes depending on access and whether internal trim must be removed.

Most Common Reasons For Failure

• Impact Damage: Minor collisions or shopping-cart strikes often crack the door or deform hinge mounts.
• Broken Clips Or Hinges: Plastic clips and hinge pins can become brittle with age and snap, causing loose or non-closing doors.
• Corrosion: Moisture and road salt corrode mounting points and fasteners, leading to weakened attachment.
• Paint Damage And Fading: Exposure to sunlight and chemicals causes paint degradation, necessitating replacement for cosmetic reasons.

Overall, this fuel filler cap cover is a practical, cost-effective replacement that restores appearance and function to Peugeot 807 and Citroën C8 vehicles while matching the EZW grey metallic finish.

Product Overview

This painted fuel filler cap cover (fuel door) is designed for Peugeot 807 and Citroën C8 models. It restores exterior appearance, protects the fuel filler and cap from dirt and moisture, and ensures correct alignment and closure of the fuel flap. Ideal for professional workshops and experienced DIY mechanics looking for an original-fit exterior body part with the KGB (Ethel Green) finish.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 807; Citroën C8
• Product Codes: 1485207080, 151790
• Additional Numbers: KGB (Paint Code)

Fitment and Function

The part replaces the external fuel filler door and matches the factory paint finish for a consistent look. Its primary functions are to provide a weatherproof closure for the fuel filler area, prevent contamination of the fuel cap and filler neck, and maintain vehicle aesthetics. Compatible with vehicles that accept the listed product codes; check the part number when ordering.

Installation Recommendations

Suitable for installation by professional technicians or experienced DIYers. Typical replacement steps:

• Open the fuel door and remove any inner trim or access panel to reach mounting screws or clips.
• Carefully remove fasteners (screws, rivets or plastic clips) securing the old filler cover and detach it from the hinge and locking striker if present.
• Transfer any locking mechanism, rubber seals or springs from the old part to the new cover if required.
• Fit the new cover, align gaps and hinge movement, then tighten fasteners to the correct torque. Replace damaged clips or fasteners with new items for secure mounting.
• Confirm correct closure, latch engagement and paint finish alignment. Touch up paint edges if necessary to avoid corrosion.

Use common hand tools, panel-clip pliers and corrosion-inhibiting products on metal contact surfaces. If the part is painted, handle carefully to avoid scratches during installation.

Why This Part Commonly Fails

• Impact Damage: Side bumps or collisions commonly dent or crack the fuel door.
• Corrosion And Wear: Hinge pins, springs or metal mounting points can corrode, causing the door to sag or stick.
• Broken Clips Or Mechanism: Plastic clips, hinge elements or the latch mechanism can snap from repeated use or stress.
• Cosmetic Degradation: Paint chipping or fading from stone chips, fuel spills or environmental exposure.

Notes For Buyers

Always verify the product code (1485207080 / 151790) and paint code (KGB) against your vehicle’s existing parts before purchase to ensure correct fit and color match. Replacement often requires minor adjustment to achieve perfect gap alignment; if unsure, have the part fitted by a bodyshop or experienced mechanic.

This replacement fuel filler cap cover is designed specifically for Peugeot 807 and Citroën C8 vehicles, finished in EZR grey aluminium paint to match the original exterior. Ideal for professional workshops and DIY mechanics, the part restores the vehicle’s appearance where the original filler door is scratched, dented, or has lost its paint. Commonly searched by OEM numbers, this cover is a straightforward, cost-effective way to maintain body integrity and curb appeal while ensuring proper alignment with the fuel flap and surrounding trim.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 807, Citroën C8
• Product Codes: 1485207080, 151790
• Other Numbers: 151793
• Color / Finish: EZR – Paint Grey Aluminium

Compatibility And Fitment

Fits original body opening for Peugeot 807 and Citroën C8 models where the manufacturer used the EZR grey aluminium finish. This cover is intended to match factory contours and mounting points; customers often search using the OEM codes listed above for a precise fit.

Installation Recommendations

Replacement is usually quick for a trained mechanic. Typical procedure:

• Open the fuel flap and inspect mounting points and retaining clips.
• Remove any screws or plastic retainers securing the old cover; some variants use snap clips accessible from inside the wheel arch or inner trunk lining.
• Carefully pry the old cover free using plastic trim tools to avoid damaging surrounding paint.
• Align the new cover with the original mounting points and secure with the original fasteners or new clips if supplied.
• Check the fuel flap operation and gap alignment; minor adjustment of hinge or clips may be required for perfect fitment.

Recommended tools: trim pry tools, Torx/Phillips screwdrivers (depending on fasteners), replacement clips if existing ones are damaged. Allow 20–45 minutes for replacement depending on access and whether inner liners must be removed.

Why This Part Fails Most Often

The fuel filler cap cover is exposed to external damage and commonly fails for the following reasons:

• Impact or collision damage from shopping carts, minor bumps or parking incidents causing dents, cracks, or broken hinges.
• Paint chipping and corrosion from stone chips, road salt or long-term environmental exposure, leading to visible deterioration.
• Broken or fatigued plastic clips and hinge components due to repeated use, stress, or previous improper repairs.
• Vandalism or forced entry attempts on the fuel flap area.

Replacing the cover restores aesthetics and protects the fuel filler area from water and dirt ingress.

Note For Buyers

This cover is often identified and ordered by OEM reference numbers. Verify that the listed product codes match the part number you need for your vehicle to ensure correct color and fitment.

This OEM-fit fuel filler cap cover is designed specifically for Peugeot 807 and Citroën C8 models. Finished in EYJ Aster Grey paint, it restores the vehicle’s exterior appearance and protects the fuel filler area from dirt, moisture and minor impacts. Commonly searched under product codes 1485207080 and 151790, this part offers a direct replacement for worn, cracked or damaged fuel door covers and is ideal for professional workshops and DIY mechanics looking for a precise fit and factory-style finish.

Technical Information

• Manufacturer: Stellantis (Citroën / Peugeot)
• Model: Peugeot 807; Citroën C8
• Product Codes: 1485207080, 151790, EYJC, EYJ
• Additional Numbers: Not Specified

Function And Benefits

The fuel filler cap cover (fuel door) protects the filler neck and cap from contamination and corrosion, helps prevent fuel theft and maintains the vehicle’s exterior aesthetics. A correctly fitted cover ensures proper sealing of the fuel flap area and preserves alignment with the surrounding body panels.

Installation Recommendations

• Preparation: Work on a cool, dry surface and keep replacement parts and fasteners organized.
• Removal: Open the fuel flap and inspect retaining screws or clips. Remove any visible screws or fasteners. If access is restricted, check the inner wheel arch or trunk area for additional fasteners securing the assembly.
• Disconnection: If a tether or locking mechanism is present, carefully disconnect it to avoid damage. Retain original fasteners if they are in good condition.
• Fitting: Position the new cover into the hinge and align with surrounding bodywork. Reinstall clips or screws securely but avoid overtightening to prevent cracking the plastic.
• Adjustment: Check the flushness and gap around the fuel door; small alignment adjustments may be required to match the factory fit.
• Final Check: Operate the flap several times to confirm smooth opening/closing and proper latch engagement.

Why This Part Most Often Fails

• Impact Damage: Minor collisions or bumps at the fuel filler area often crack or deform the cover.
• Hinge And Clip Wear: Plastic hinges and retaining clips degrade over time, leading to loose or sagging fuel doors.
• Corrosion And Seizing: Moisture and debris can corrode metal components or cause latches to seize.
• Paint Degradation: Exposure to UV and environmental contaminants can fade or peel the painted finish.

Additional Notes

This part is typically sought by mechanics and independent installers under the product numbers listed above. Ensure the paint code (EYJ) matches your vehicle when color matching is important. For best results during replacement, inspect hinges, clips and the latch mechanism and replace any worn components at the same time.